Is the US General Gen 3 72” Toolbox worth the cost??

I have upgraded to the US General 72” roller cabinet from Harbor Freight. After the video was made I priced two builds through my Snap On dealer. A similar style box in the Masters series would be $25000, while the Equos Series would be $22750. Snap on does have some cool options, but this is a little over 10% of the cost of a Snap On.

[@gabriell4031]

As for locked these boxes have an inch in the back of each drawer for large drawers I would add 3 large 2x2x1 inch magnet blocks for small single and for medium 2. That will be much better user experience and what I ended up doing for my 56” box. Daily use on this box has been amazing. Filling it out after not wrenches for 2ish years so fun to fill out with new great tools. I’m also a Milwaukee fan. Have the new stubble on pre order haha.

[@GlovedUpGarage]

I’m still happy with mine. I just need to add more lights😂🤣 thanks for watching!!

[@stephendavis7812]

Those draw locks can be removed. I have a few US general boxes in my shop. I removed those plastic stripps and have them stored somewhere. Makes the boxes more pleasant to use.

[@GlovedUpGarage]

I figured out how to get them out after seeing a post in the Harbor Freight Hacks group on Facebook. I removed the rubber pad on top to install the hutch, but now it slides a little bit. Thanks for the tips, and thanks for watching!!

[@paulmysliborski4832]

You're going to have a killer set-up with the 72", the hutch, and those two end lockers. Congrats!!

[@GlovedUpGarage]

Thanks!! I’m definitely looking forward to it. Thanks for watching!!

[@bnorby213]

Literally just ordered the exact same setup in white! Very nice

[@GlovedUpGarage]

I’m excited to get this all put together!! Thanks for watching!!

[@bnorby213]

@@GlovedUpGarage only thing I might get is a set of caster spacers to bring it up a bit so I can use the hutch more comfortably

[@marksmith9181]

You don’t have to cut the end off just remove the whole piece it’s easy I did it on my box.

[@GlovedUpGarage]

I figured it out finally, but thanks for the heads up!! And thanks for watching!!

[@DownloaderVideo]

Correction here brother, the other models are not the same height due to different casters sizes being used depending on the model....they could possibly be modified to make them match but they are not out of the box.

[@GlovedUpGarage]

I missed that part about the casters on the smaller boxes, they aren’t cheap either. Thanks for pointing that out. I’m still very pleased with the box. Thanks for watching!!