iS tHiS a GoPr0 KiLlEr!?!?1

[@RunCamFPV]

Low efforts but really entertaining! Thanks for the video haha!!😆

[@ThumpahFPV]

This IS the worst product review test anyone has ever done. 10/10, would watch again

[@kinozadelo]

+1

[@serenestateofbeing1062]

Nothing like doing too big of a dab and then walking aimlessly around the house, utterly baked and confused, listening to bot ramble. It's an experience I'll never recreate 😂

[@testpilotian3188]

And there’s me thinking you were describing bot…

[@data-drifters]

Past Botgrinder at it again

[@dronerob]

Way too much effort. Best review out there lol

[@wagonlee5443]

Medium effort tip: You can just solder 5V to the same pad. It's no problem as it's all linked anyway. Hell you could even daisy chain from component to component. To make this easier bond the wires first by soldering or twisting them!

[@BOTGRINDER]

I remeber that not working out so well...

[@ferocious_r]

@@BOTGRINDER Sounds smokily entertaining without too much effort!

[@RuToClose]

It's not the volts that gets you. It's the amps! Lol, for real as long as the output has enough amperage it should work. As well as grounds, but keep 5v gnd to 5v gnd. Something power hungry should be alone. I don't know the output of the fc, or amps required to run. LOT'S of effort with a multimeter... Two 5v outputs don't make 10v, but if they each pull .5 amp, that is 1 amp draw.

[@Fly_High_FPV]

Lol, I used to know a guy who would say "just ignore the shake"....for some reason, I don't talk to him anymore 😂

[@nickbrown7700]

5V regulator and attach cam straight to the Lipo.

[@johnsonkahili9097]

that's low effort and it works. I did the same thing with the thumb4k and passed it between multiple drones

[@andrewy3711]

It sounds like you're really burnt out dude. I don't think there's been a video in the last 3 months where you don't complain about making videos. Maybe a little off time would be good

[@3nertia]

5:40 - I think this might be the most precise flying I've ever seen you do 😉 P.S. That bit at the end was hilarious and well done!

[@gerben1801]

Hey man, you realy make me happy with your videos. I appreciate it man.

[@BOTGRINDER]

Hey no problem.

[@ericstephany7305]

@@BOTGRINDER BAHAHAHAHHA amen.

[@SyphenHouse]

Meanwhile, me rocking a fleet of crappy old Runcam Orange 5..

[@glynwarren]

Was so ready to say a negative but dude the effort of not failing and walking a fliggt was amazing 😂😂😂 thumbs up from me for the level of effort when things went wrong !

[@JohnnyOctane]

This was epic. That argument with yourself was truly brilliant.

[@73FPV]

The stare cracking up

[@eyeflytinkerings]

Haha, glad to see the model i uploaded was of use for you!

[@BOTGRINDER]

Eyy! Thanks again!

[@Nic_RC]

The thumb pro V2 has been pretty solid for me, I'm probably going to pick one of these up.

[@leonardothillet6423]

I’m so done making naked gopros too, so much work and sometimes they have random issues and they are so delicate and EXPENSIVE… I say bones is cheap enough now. But that run cam seems like the option to slap on your race quad and record some fast laps!

[@Bak3DNormal]

I have never been so entertained on youtube in such a long time. Thanks for this, homie

[@Mike_G_FPV]

The ending of the video was gold lol

[@airdevil21]

The part at the end from 6:00 is hilarious 🤣👍 thanks Bot!!!

[@Rutger-Zegveld]

Haha you made me laugh so much at the end 😂😂 keep on making your videos!!

[@SpaghettiFPV-tg3qh]

I PISSED MYSELF LAUGHING WHEN YOU WENT THROUGH THEM BARS HAHAHA THE HANDS SHOWING HAHAHAH BEST DRONE FLYING EVER

[@philloufpv-zq4vh]

This is the best runcam thumb 2 review. And i've watched every single one of them.

[@mrb5079]

Quite possibly the best worst product review out there. What the video lacked in effort made up for the comic relief and self preservation. BRAVO! SOMETIMES LESS IS MOAR!

[@mean78mashine]

Don't worry, be happy, taking it easy might be a good idea. But I miss my bottgrinder and get worried when I don't see you in your natural state and habitat. Respekt

[@gogglesfpv7986]

helll yeah! thank you for the upload! def put some effort into it! thank you

[@MrCaptainnemo]

I want this product more than I can say. If I didn't have faith in Bot's independence and sincerity I would think he was shilling for the manufacturer. I shall buy three of them

[@plop386]

short answer. no it it overheat at 4K after 3 min recording. i had to drill vent in the case :) your welcome

[@dvnstone]

I just turned in for the entertainment Factor!

[@DanoFPV]

Your FX30 out there lookin good bro.

[@SeeFPv-qm6ie]

hey bot your about the only og fpv pilot that still makes videos i always watch your videos thanks for your awesome videos.

[@RookieRay]

Wow your flow is insane

[@unRealityFPV]

runcam either loved this or hated this. both are justified.

[@jrodrc4137]

the best fpv channel on youtube

[@FlyZoneFpv]

😂😂love the end Bot Letz go 👍🏻

[@Wizzard033]

2:23 Finally some good tunes! LOL

[@Syncopad]

I think if we combine stews reviews and bots. We get a normal review 😂

[@BrandonJ131]

😂 OK. My side hurts.

[@xrxfpv1994]

Bud, with you on the whole "tired of little soldering and can't see" in reality I broke my micro glasses and thought, shit, do a review of different jeweler / magnifying glasses 😊

[@LowVoltage_FPV]

Or one of those cheap digital microsope. I got one recently and what a game changer that has been

[@dronemagicnl4986]

Don’t ignore the shake. I had lots of issues stabilizing in gyroflow on the original tiny go 4k. Footage also sucked compared to the caddx peanut that was 2.7k.

[@big_nickos5609]

Honestly the ending saved the vid lol

[@brookscoleman1890]

I've been working on an FPV soldering iron with macro focus so you don't need the glasses anymore for those tiny pads.

[@Jephro360]

Hey Bot we are coming to Philly for some work and would love to fly with you somewhere!

[@JoshDisher]

I just bought a 13, and it's FIRE. Get an 11mini bro... I love mine.

[@fpvfritz]

My past self pulled that same stunt on me last week! Future me always gets screwed by past me.

[@RCRitterFPV]

these are the best, thank you

[@RATRH13]

thats how it works

[@FlyTimeRC]

Definitely watching x jets video but I had some laughs in this one so totally worth it. 😂

[@slappomatthew]

maybe not the best review ever. or maybe not even the 2nd from worst review ever but damn that shit was funny. I love you bot.

[@Dorff_Meister]

I got an Andonstar AD407 microscope (from Amazon) a couple years back. It's amazingly helpful for FPV soldering.

[@bFreeFPV]

😂🤣 I needed this bro thank you .

[@keithdizzle510]

Dude how did you fit through the bike rack rails!?

[@Fpvfreaky]

lol brilliant video bro 😂 especially the both of you that was funny mate 👊🏽🤣

[@jeromemarie4770]

hilarious best review ever on youtube

[@Sketchy_FPV]

only thing that mandatory "it will be better next time" was missing :D

[@dronebirdun]

pure sport fresh man 💙

[@bigbellyflyer]

Holy smokes Bot Grinder! That was cool, great improvise. Just need duct tape and sponges on your shoes and you should get that buttery smooth footage. Hey I totally dig your videos, Big Belly here all the way from Santa Cruz Ca.

[@matred3538]

Your videos shine brightly. Even in low effort October. 👍✌️

[@larryjones2460]

Things never turn out the way I plan either, bro. 😂

[@mapleownage27]

get some surgical loupes. I have seen docs into their 70s continue on just fine while not being able to read a menu.

[@mece66]

I think while you failed in making it actually low effort, the result still looks low effort, so I guess it's a... success? Well good job! Also I kinda want that camera. I like small cameras. Great review!

[@ferocious_r]

Bro, you do look tired. Worrying a little from over here on the other side of the Atlantic ocean. I hope you have someone to ask for help if you want help. Please be safe first and foremost!

[@BOTGRINDER]

I'm good! Big announcement coming soon I figured stuff out.

[@Thesafarm]

Nice review .

[@Fly_High_FPV]

I've got the minimalist mounts and the fully rugged mounts for the Thumb , Pro, Thumb 2, (every camera) with any size loops (GoPro Labia, 360 go loops, even the little SMO 4k loops, horizontal, vertical, or both 👌)

[@rreiter]

I can't tell, was the drone flying near a person or was a person flying near the drone, lol.

[@Cheese.injectioN]

Bro, in my opinion you are one of the best fpv KZbinrs and I love to see all your videos. But you seem a little tired this time. Are you all right? Maybe you need a little vacation

[@lagezon5270]

this comment was a lot of effort

[@ColeCleveland1]

Is that a CSX hat like the train company?

[@BOTGRINDER]

It is, I rode freight for over a decade and csx was my main ride.

[@xjet]

Hahahaha....

[@Vogxel]

you can just solder two wires on one pad

[@SeaSide420]

my past self does that to my present self all the time 😆

[@SiNFPVGUAM]

Oski intro is the best intro

[@caujka]

🙂 You can duct tape it to a bike or a hat, connect it to some little USB power bank, and have fun on a local pump track.

[@toniqfpv]

Hehe getting Tyler Durden vibes at the end

[@GluFPV]

I have one and I like it. Never had a GoPro but I think if I knew what I was doing it could look decent haha😅

[@buttersfpv]

can i have the footage? i want to try something. provide the .gcsv file for the video too.

[@zader253]

I didn't want to buy one before I watched this and definitely still don't want one lmao

[@johnnyjohnson6771]

Funny as Hell! Unique style.......

[@caseyfpv]

10/10 video

[@StognaBolognaFPV]

Man im so glad you made this video. ive been looking for a backup/spare camera in case i kill my precious hero 10. Guess ill skip this and save my pennies for another gph10

[@BOTGRINDER]

Check our xjets video i linked, , the quality ain't too bad if you have sunlight and fiddle with the settings.

[@StognaBolognaFPV]

@@BOTGRINDER here in Missouri we get plenty of sunshine so I might have to give her a second look. Thanks for the reply bot! 💜

[@Brian-S]

Still using my caddx peanut. I'm sad because they stopped making them so I guess I'll be moving over to insta360 soon

[@bar187]

Hey, Botgrinder. I had an idea.....I see that you're getting into crawlers, which is awesome, because they're awesome. You should approach Tommy from ummagawd about creating some crawler super sticky tyres. It'd be like cheat mode engaged.

[@BengalCatChilli]

Looking trim bro

[@Alex-yu3ik]

funny video, great ending!!

[@sk1fpv]

The answer is NO.

[@MorningView]

word up imma order one

[@chrisbee5481]

Isnt a second hand dji action 2 for just over 100 bucks the best option? Light like a naked gopro and cheap like this runcam

[@BOTGRINDER]

Oh wow are they that cheap now?

[@chrisbee5481]

@@BOTGRINDER just bought an action 2 for 140 bucks

[@luv4God]

homerun!!!!👍

[@grumpyoldnerd8727]

Have a look at Red Kyte's solution to that problem. Epic !

[@y_i_fly6256]

( A ) for effort. Hey man at least you tried.

[@creativesymon]

Why would they send a "gopro" sized mount for a tiny thumb? lol The screw would weigh more than the thumb ;) I have a ThumbPro (not the 2...more 1.5) on my Grinderino...and it's a mini mount. I also have an adapter to run it from the lipo balance lead. Decent camera for the money, I guess...but I want the Go3 S. But it's waaaay more money. Also Runcam sell the bundle with the filters...which you got.

[@phiveone]

I only watch your reviews.

[@Syncopad]

Yes!

[@slappomatthew]

everything is a gopro killer if youre cheap enough.

[@ChainsawFPV]

Low Effort October is encouraged. But make sure to skip No Nut November.......

[@donegalrediscovered3309]

Here’s lots of effort October Review .. 👍

[@grimripperrr]

I can’t believe you flew in a graveyard, the dead people are so upset now, unsubscribed

[@Heyokasacredclown]

Opinion I have$120 to spend on Fpv tiny whoop anolog frisky which is your best pick? Bnf d8

[@dupfpv14]

Mobula 6 😜💪

[@FPVwineUK]

This review was like their customer service. I prefered your review to their customer service though! Would watch again, will never buy RunCam