Is THIS How You Would Do It?? Getting A Call For Another Funky Job!

[@phamanh30926]

Love your videos. No music. Just engine sounds working

[@danishpuma]

Thats a lot of trouble for a new coffee maker for the office. 😂

[@andewegster]

Maybe a bit late reaction, but you are a true Moffett Master! Nice job!!

Another awesome video. You are so good at what you do. Always nice and calm. You must be a pleasure to work with. Never getting excited. 👍 👍 👍 👍

[@Victer121]

That was seriously some good coordination Matt. You really know how to work that Moffet

[@JrFlexing909]

Awesome to see some tandem lift with the muffett. Great team work getting the job done.

[@KG_BM]

Funny, just as you came to mind, youtube showed the video. Winter is coming, looking forward to the snow content again!

[@NewDriver-qg5ut]

That was som serious working here. You even went with the whole B-train just for the Moffet.😄

[@ScottBallah-t8i]

You are a awesome truck driver I watch your videos all the time and some of the stuff you drive is amazing

[@umeshkadam1288]

Awesome great job also good team work Matt

[@hammer313]

i had to do something similar the other week. it was a large pallet inside a shipping container that was almost as large as the inside of the container and weighed 3 tonnes. Our fork is only rated at 2 tonnes. I wanted to get a bigger fork, but I'm not the boss. So we borrowed a shipping container ramp from the warehouse next door and with tine slippers we lifted the end and dragged about half way out until the the rear wheels of the fork was a foot off the ground. Had to drive it in a bit to get the wheels back on the ground. We bent the slippers. then we borrowed another fork and one on each side of the pallet like you were when you first lifted it off the truck, we used the fork's side shift to move it fully out of the container 10 inches at a time. lift, shift, down, lift, shift, down, etc Then one in reverse and one in forward drove it into the warehouse.

[@CristianFernandez-cs3gf]

Que manera de renegar papu , igual que en ARGENTINA 😅. ÉXITOS TITAN

[@dmo0]

Good teamwork, competent guys, ✊🙂💪👍🏆🥇🥇🏆

[@perkirkegaardlemming720]

Instead of loading the pallet from the trailer, the trailer could not be backed 90 ° on the building outside the gate and the pallet could be pulled in with a forklift

[@callthemall]

Maybe, but there was no forklift inside the building

[@hammer313]

@@callthemall just thinking of a different way, not a better way than yours. if the dock height closely matched the truck bed height, rotate the create 90 degrees and put it back on the truck so the ends are hanging out both sides, move the truck so the end of the create is a foot from the dock and then push it in from the outside. might have to push it in, say, 2 feet and then lift it so the truck can drive out. even if that would work, there was a lot of junk near the building that would need to be moved so the truck could get close. just thinking of a different way, not a better way.

[@perkirkegaardlemming720]

@@callthemall ok, but you got in delivered well. :-)

[@RussellBowen-o6d]

​@callthemall I would of backed the tilt tray straight up to dock and used the 2 pallet jacks straight away off the tilt tray, if tray to low then back it up on blocks of wood as you know, it just didn't look that heavy in the end..all good, great work mate, cheers

[@emdeeyusuf703]

Awesome team work 👌

[@clash0820]

Great job once again!

[@eddie1romanian]

Yo cal I’m right behind you on I-196 in Grand Rapids I knew I noticed your truck !!!

[@callthemall]

Wasn't me unfortunately, I only have Ontario Canada authority right now

[@eddie1romanian]

@@callthemall guy has the same truck as yours color and everything and was hauling the doubles .

[@Graveltrucking]

The adventures of Matt always trying to do the impossible 😂

[@kimmullin4864]

Thanks for another fantastic video

[@devnull7812]

Hats off from germany - where TÜV and mostly german trade associations would say NO (way) 😄

[@thedoc8008]

I can't help but wonder what the heck gets shipped in a container that size and why such a tiny warehouse is taking it in haha. Great video as always!

[@callthemall]

I believe it was a large printing press of some sorts

[@pavelblazoun992]

Super cool video gud job 👍👋🥰🇨🇿😉

[@PeterMartin-l4d]

cool stuff good job

[@jamesbagos3459]

I’d have raised it high enough to get it above the wheels then sucked the fork carriage back enough where the tires of both moffets were in the middle that would let it spin more easily

[@Hairie-xz7nq]

Good job boyy❤❤❤

[@Tristram9]

I saw two moffits and came running

[@brandonmoffatt6113]

Just seen your truck at tims in bobcaygeon this morning around 5am on my way to work i thought i reconised the truck

[@callthemall]

That'd be me!

[@Bigslootb4g]

Hot damn that is some sexy forklift action.

[@raze4789]

Since I'm not familiar with moffett's and their lift capacities I don't see another way to have done it any better. I'm assuming moffett's are on the lighter side since they need to be able to side load on empty trailers.

[@harveywaitchison2062]

Many ways to count to 10.

[@MountainBiker205]

Cool stuff as always Matt!👍I was just wondering though what that button that you push on your side control pannel on the moffet does (the ones that makes that high-pitched sound)?

[@callthemall]

It's a diff lock so all wheels are powered, but you can't steer at the same time

[@MountainBiker205]

@callthemall Thanks! I've been wondering for quite some time what that did! I was just reading through more of the comments, and the one that really caught my eye was the one about how calm and composed you are. I've been watching the channel for a little over two years now, and all throughout your videos, I've always been so impressed by how much of a genuine guy you are, and just how much professionalism you show both when dealing with people, and even when you are alone, just driving down the road to another delivery. You clearly are an expert when it comes to trucking (and Moffeting [now a real word] too as shown in the video!), but you never let this make you even the slightest bit arrogant. You may not notice it, but people look up to you as a leader because of it, just like how the other Moffet driver and the customer did in the video. It may be a stereotype that all of us Canadians are polite, and I do wish that it were true, but it's people like you that we should all be trying to act like in our lives. Even the small things, like how you always wave to other trucks passing by, to the fact that never have I heard you swear in any of your videos (even if there were plenty of stressful, infuriating, and all-around swear-worthy moments) contribute to making you such a great guy. I wish you all the best this coming fall and winter, and look forward to seeing all of the trucking action from all the way over here in Edmonton.

[@callthemall]

@@MountainBiker205 Wow thank you very much for the kind words!!

[@korner-fahrer3954]

Mahlzeit Spannend wär's gewesen zu sehen, was in der tollen Kiste versteckt war.....😂😂😂 Und der andere Kollege schien etwas erregt....so oft wie der vom Stapler gehüpft ist....🫣🙈 Aber netter Job.....!! Gruß Matthias

[@williamcassin9120]

Seen u called ya on cb KZbin man lol

[@HammerStevens]

GREETINGS BRO

[@paulmarker5689]

Using a hiab would have been a better idea.

[@xhxjdksdkdbdbs]

You look like a modern axl rose

[@amogamer6275]

Do these moffets have counter weights?

[@callthemall]

Nope would be too heavy to put on the truck

[@gorgoreg]

What's it mean when the moffett makes that beeping noise?

[@callthemall]

The intermittent beeping is reversing, though it's mostly not working on the moffett. The constant buzz when I flip the switch is axle lock so all 3 wheels spin but you can't turn

[@jasonburtch]

Callthemall you wouldnt happen to be sleeping at the husky truck stop in joyceville ontario right now would you?

[@callthemall]

Nope not me this time

[@jasonburtch]

@@callthemall I thought for sure that was your truck.

[@doc2517]

Too bad your Moffet doesn't crab walk

[@mikemckinley1031]

Hello Matt you should have picked me up I have 35 years experience with driving forklift I would have got it done with one forklift picked it up from the side and pulled the forklift right against the wall and with the hydraulics pushed it in the dock it would have taken 10 minutes for me how heavy was the crate and how heavy was the crate and how much can the Moffat lift I was watching this video. It still was a good video Matt have great weekend here from Ontario Canada ❤️❤️❤️❤️🇨🇦🇨🇦😎

[@adriand1181]

Moffetts max lift capacity is rated at 5500 lbs you would think it could lift a house but those things can become a real tipping hazard especially for those with minimal experience

[@mikemckinley1031]

@@adriand1181 the forklifts I use to drive were 14,000 pounds

[@mikemckinley1031]

I worked in a warehouse Carrie and steel coils in very tight spaces

[@jcataclisma]

Man, that was cool!!! 👍👍👍👍👍👍🦾