Is This ONE Cap Really Worth 10 DOLLARS ?!? Mosquito Cap Review vs The Needle Cap

[@Foreignwrists]

The mosquito cap could also be good if graffiti isn’t common in your city or town, you could put up small ass tags everywhere

[@CenterMassContent]

Excellent idea

[@roofusJohnson]

that's what i'm here for. haha

[@danielkrawiec2493]

I'm so used to dragging my can against the wall to cause thin lines with a standard German outline I can see me tearing the needle right off of that cap by accident 🤣. But great reviews sciz keep up the good work.

[@ScizGraffiti]

That's exactly my problem too! I just tilt the can for small area detail lines and stuff like that

[@4zul4_iwnl]

i feel this comment so hard lol. greetings from the future if u read this

[@deletingmychannel]

To be honest the mosquito cap is really nice! It gives you cleaner edges. I didn’t buy the needle cap bc it looked like it wouldn’t be as thin & more frayed. I also find the mosquito cap doesn’t clog easily and I really thought it would

[@ScizGraffiti]

Yeah tje needle cap is really more of a tagging cap for sure. I haven't used the mosquito cap too much but it is pretty impressive all around, and consistent enough with it's output that I feel totally fine using it on pieces on occasion

[@lenbones7940]

The only plus to the needle caps is you can use them to refill cans like the tiny ones and at 30cents out here in Cleveland there super cheap but i agree they leave over spray alot if u keep a small cloth in your free hand what works for me with them is the spray wipe spray method... once you get used to wiping the little excess paint off the tip you can get a really clean line.. my theory is the excess paint gets blown like splatter so if theres none you get a way cleaner line... that said with a needle cap you can only go like 3/4of an inch maybe with the mosquito after practice you can line like 3/8th it doesnt seem like much but fine line stuff i feel is always the hardest part of graff...

[@tastybread69420]

he literally use the thickest needle cap there is lol the purple one is super skinny, the white one is a lil wider and the red one is the thicc boy.

[@mikedickinson9730]

A mosquito cap did super well! Even after you bent it. It’s what a detailed graph writer always wanted.

[@ScizGraffiti]

haha I know right XD. It does make you have to alter the normal way of thinking a bit

[@clintatk]

Well... they did send it with a carrying case. 😂👍😘

[@TheGuillotinedream]

Exactly, do not put this cap in your pocket, without the case.

[@salsashark8876]

Lmao he pulled it out and complained about bending the tip literally as I was reading that 🤣

[@robertdale2964]

You can make any can low pressure. Just turn it upside down and spray some of the gas out.

[@wingnutbert9685]

Realizing this vid is 2 yrs old..... But you mentioned not liking the 'squish' of the rubber rings. If you go to a big box or local hardware store, they'll have little nylon washers. Usually they're in a draw on the wall with all the fasteners and are sold in little bags of 4-6. You could get some that match the dia. of the tube. It'll give a more solid feel. Plus you could micro customize them by sanding them down to a specific thickness to get a precise flow/pressure. 👍🤘

[@ScizGraffiti]

I'll have to hunt for them and try it out! Thanks man!

[@spwan10]

3:45 omg lol I would be so pissed if that happened to me, that's probably why it comes in a little plastic box.

[@ScizGraffiti]

Yeah that was what I thought too after seeing it bend so easily. The homies would definitely laugh though if they see you pull out a case and be like "yeah one sec, let me take my cap out of its case" lol XD I cut out a lot of footage of me not being too happy about it bending lol

[@spwan10]

@@ScizGraffitiLol right, most people just have their caps tossed in their bag or something. But that mosquito cap needs his own lil space haha. It was just comical you pull it out of your pocket, an its bent (which no one expected)

[@ScizGraffiti]

@@spwan10 haha yeah including myself bro

[@christopherstein2024]

@@ScizGraffiti They should have put a plastic tube around the needle put I guess they didn't want to hide that stinger

[@lenbones7940]

I actually love this thing you just have to keep it super clean and in the case when not in use.... i mainly use it to tag in tiny areas when the surface is to rough for a mop... if u practice alot with $1 home depot/Walmart paint till you feel it out you can make it write like a felt marker... telephone poles and mailboxes can be bombed using a can which is epic.. ive even got it working well on those tiny refillable cans.. its worth the money as long as you treat it with respect lmao

[@Stu_DLNGR]

Thanks for the review!! Those results are surprising.

[@ScizGraffiti]

No problem! Yeah I found it more functional than I was expecting but I'm still suspicious of their pricing model lol

[@testick8431]

10 dollars?! If it is the best thing in the world I wouldn’t give 10$ for it!

[@robertdale2964]

It's an interesting idea. But similar lines can be made with a skinny cap. Personally I suck at it but I've seen it done plenty of times. I don't think it's unique enough to warrant the high price tag.

[@Major_FaimOfficial]

Wish u would've put those rubber rings on the other caps too just to see how much they help if at all

[@ScizGraffiti]

That would have been a good idea. I can tell you though that on the mosquito cap I have used it with them and without and it does make a big difference, so it'll probably be the same for some other caps. Might be a good way to regulate the output of some fatter caps as well though!

[@poetik1ofthedark]

It's a wire thin tube poking out and he sticks it in his pocket. It's then bent after wondering what the case was for. That said, i love my Skeeter cap but I do canvas and legal walls these days, so I'm never rushing. Skinny cream cap was the one to beat, and this does it, but it's just another tool in the toolbox. Needle cap is too splattery.

[@ScizGraffiti]

I had it in my pocket in the case smart guy. Lighten up, gees

[@off.pudding]

6:58 when the chakra aligns

[@ScizGraffiti]

XD yeah lol

[@22K562]

Super pricey I’d say like 3.50 would be fair. I can see people using this cap for intricate murals or commission walls where your getting paid. I can see people using this cap but it’s a very niche market. Not your everyday illegal graff

[@ScizGraffiti]

Yeah for 3.50 I would feel a little less ripped off haha. Not that it is super bad, just you have to use it a hell of a lot to get your money's worth, and like you said, you can't get much use from it in the illegal graff type scenarios.

[@lanceeverhard6951]

Yeah, this would be worth it for a commission or a legal spot. Not conducive for stealth missions.

[@graffreaky4513]

I miss those vagen caps. I had hundreds of them but sadly not all were good.

[@ScizGraffiti]

Yeah seriously. A lot of quality variance in those bad boys

[@graffreaky4513]

@@ScizGraffiti word.

[@djordjemijailovic9685]

There was a clip on youtube called "graffiti instincts bonus video", dont know if its still up, a french writer i think giving you step by step instructions on how to make this 10$ cap by yourself with a regular skinny cap and a needle.. you guys are welcome ;)

[@djordjemijailovic9685]

kzbin.info/www/bejne/aZ2tent9r5V7l6s i even found it for you guys ;)

[@ScizGraffiti]

Yeah there are a few good methods out there :) One thing that I've come to realize is probably the most valuable part of this cap is actually just the tiny rubber rings on the stem of it. You can use them to flow regulate almost any other cap for some cool effects!

[@skepticfucker280]

Mosquito cap on 50ml can might be fun..... Needle cap awesome for transferring paint!

[@ScizGraffiti]

True! Definitely the easiest method to transfer that I've found

[@turtleborn]

6:30 the needle is nice for 4x4 painting when you got an obstacle in the way you can spray same thickness as the cap youre using but farther away other than that never used it either

[@ScizGraffiti]

Good point. It makes it perfect for if there's a small pipe in the way or change n wall height. I hadn't thought of that one!

[@acey_570]

i'm not gonna lie, i don't really get it. if you're going THAT skinny why don't you just use a paint marker?

[@LenKusov]

Ya know, I bet I could make one of these with an old HRT needle and some keyboard O-rings on a stock cap...

[@ScizGraffiti]

Yeah a couple people mentioned that as well to me and it seems like it's de a good trick

[@LenKusov]

@@ScizGraffiti Hell, bet you can super glue the plastic part of the needle on instead of jamming it in so you can use the needle cap and not bend it...

[@NomingTheNom]

Great review man, i was curious just how effective this cap was but i wasn't willing to waste that much money on it :D that said i learned from a brazilian friend that in Brazil they make a homemade version of this: heat up the nozzle of a cap until it starts melting then stick a syringe needle in there. Boom, you just saved 10 bucks lol

[@ScizGraffiti]

Yeah someone told me that in Germany they do the same sort of thing too! Definitely worth a try to save a ten

[@salsashark8876]

What size needle? Curious about how this would turn out

[@londonhillbilly150]

Great review 👍, can someone please tell me where I can buy his sticker packs tho.

[@ScizGraffiti]

If you send me an email at [e-mail] or dm on instagram @scizgraffiti I can send you a pack over!

[@londonhillbilly150]

@@ScizGraffiti thanks 😁

[@GODHATESVANDAL]

the needle cap isnt supposed to be used in pieces mate. there is actualy a really good use of it and that is as an extinguisher.meaning you can throw a tag at a height you cant reach without making any flares.

[@ScizGraffiti]

You obviously haven't used this one. This one is specifically for detail work and piecing. It isn't like the red needle caps that throw paint like a WD40 can needle does. Go check it out on bombing science. The pressure limiters on this are evidence to the contrary of your statement as well. Did you watch how this thing sprays?

[@GODHATESVANDAL]

@@ScizGraffiti im talkin about the red needle cap bro. The one you said is shit

[@whatareyoudoingthis4]

@@ScizGraffiti 11:35 is blatant misinformation. Red needle caps are a favourite for dusty fills, throw outlines and reaching more than you normally would

[@fatkorn]

10 years experience... huh, okay but it's Canadian 10 years soooo that's like 7.2 US years. I think, maybe I'm wrong, I have trouble understanding the metric system.

[@ScizGraffiti]

Must be like the CAD/USD dollar conversion then

[@migueldelapena9906]

that's not how it's done. you have to put the tip through the hole in the cap (you have to put the tip with the hole side down) and with a lighter burn the plastic on the back that will melt and seal the bubble to the cap

[@ScizGraffiti]

you know I had nothing to do with how this cap was made right...

[@Moto_Medics]

Makes me want to put rings on other caps to see what happens like if you did that to the needle cap would it fix the overspray

[@ScizGraffiti]

Yeah that's a great idea. I'll have to try that with a few different skinny caps and see what it does!

[@Moto_Medics]

@@ScizGraffiti there’s a whole new world messing with stock caps I believe, apexer is on that road already he does some cool stuff.

[@ScizGraffiti]

@@Moto_Medics yeah for sure. There's lots to do with cap adapters as well

[@TheDuster01]

We make our own mosquito caps in mexico since forever lol!

[@CenterMassContent]

THIS one had a handmade look too, I'll bet that's why it's $10. If demand grows enough the price will drop accordingly.

[@CenterMassContent]

MADD Potential. You get marker precision out of a can! Vertical I-beams become billboards now! I'd like to try it on some railings or bars to create a piece you can only see from the approach angle(as bars come together like a solid surface) it really opens up tons of possibilities great review of both strength & weaknesses 🦟

[@ScizGraffiti]

yeah it takes some getting used to but if you use it enough I think you could get the control for an extra tiny piece hah

[@djsm1l336]

Ayo I know that this vid is like a year old and you probably might not even see this comment but what would happen if you put this cap on a tall high pressure can? 😳 I've seen some people use normal needle caps on talls to get an "extinguisher" effect with the distance and all that, but what would happen with this cap? Just a random thought if you see this or even still have the cap

[@ScizGraffiti]

That's such a great idea that I can guarantee you that you'll be seeing a video on my channel in the future answering that question. Thank you for the comment man!

[@djsm1l336]

@@ScizGraffiti haha I'm glad you even saw this! Super stoked and I can't wait to see what happens! Also keep up the radical vids homie, I love em!

[@wisterV]

If yer getting expensive caps blow out paint with acetone or WD-40!

[@Cuppyy]

theres a white needle cap I got in a random cap pack which was amazing and had a thinner needle i can’t find it for sale anywhere though. Id recommend it if anyone sees it makes very thin lines.

[@ScizGraffiti]

hmmm interesting. I'll defs be on the lookout for that one then. Was it with a metal needle too or plastic?

[@viktorvaugndoom]

did it have a yellow dot?

[@Cuppyy]

Sciz Graffiti plastic

[@Cuppyy]

anok2 nah just a white cap w transparent needle

[@ScizGraffiti]

@@Cuppyy ahh gotcha

[@Peanuts_jelly]

Bruh that's why they gave you a case, use it clean it put it away

[@ScizGraffiti]

"bruh" I did

[@olivertitus1412]

I like your cut *G*

[@ScizGraffiti]

Much appreciated bro

[@groovy3934]

Only ogs remember vegan outlines stock on lak, that gave me some fucking good vibes. Nice video sciz, already eager to watch the next one

[@ScizGraffiti]

haha thanks man, gotta love the days of a vegan outliner and 2 pink NY fats on the lid when you got your paint!

[@nocomply43]

O.G.'s remember when there were no trendy graffiti paint brands at all. everyone involved in this video and all commenters need to move to East Los Angeles for five years or so and if you survive, then open your mouths on the internet. Guys, from someone in this since the eighties.... harden up.

[@ScizGraffiti]

@@nocomply43 dude lighten up. nobody thinks you're cool and you certainly aren't better than anyone running your mouth like a jackass. If you've been around since the eighties, think about how stupid you look as a 50 year old telling all the 12-30 year olds in these comments about how you think their the losers. You've really gotta lighten up cause this is pathetic

[@TOGGGAA1]

@@ScizGraffiti “Vegan outlines stock on lak” does sound like some 20yo from the suburbs white boy comment lmao

[@spencerjacobson2568]

Just get a ny fat and take out the black part then put a mechanical pencil tube in the whole

[@franzhanz8945]

Thats just a needle cap with a syringe tho can make that yourselve...

[@ScizGraffiti]

Way cheaper that way too haha

[@FringeWizard2]

I'm going to just buy a WD 40 can and take the cap off of it and use that for my spraypaint.

[@ScizGraffiti]

that could work really well. definitely is cheaper! hahah

[@yeahnah7220]

Why even buy the WD40? Just pull the cap off and walk out. Done it it hundred times myself.

[@jeremyf1400]

Just ordered a bunch of caps yesterday and didn't get a mosquito, damn I regret it

[@dreamedrook7590]

Where did you get them from?

[@jeremyf1400]

@@dreamedrook7590 artprimo

[@dreamedrook7590]

@@jeremyf1400 thanks

[@outpost3845]

I feel like I could make that with a fat cap and a hypodermic needle

[@ScizGraffiti]

You definitely can. I have seen people do that and it works just fine

[@oscarlugo6932]

You can make your own if you have a needle...

[@ScizGraffiti]

True, for much cheaper

[@DanielSmith-br1zi]

I can get that size line with an actual stock tip....trash

[@vladimiro83]

Here the dots again.😭

[@jasonvorhees5147]

4:32 new cap is trash

[@strhaivenswr]

That's what the little case is for mor**on

[@ScizGraffiti]

it was in the case when it was bent smart guy. Lighten up man. the faster you do, the better a life you'll live

[@Corruptt]

wha wha why would u need it that skinny

[@fkl770]

cant you just make this ur self though the inside of a pen wont be as good but will still work.

[@ScizGraffiti]

I know ow dome people have actually made the same type of thing with needles. I have a feeling a pen would be too unregulated and would kinda spit out paint but I'm sure there's a way to make anything like that work in you really really tried haha

[@fkl770]

@@ScizGraffiti yeah fully mate while typing the comment up half way though i thought the inside of a pen is too large a needle would work alot better just watch if you drop it hahaha inject spray paint into your blood stream.

[@sirpoppinchuck]

Hmmmmmm? 10dollars???

[@ScizGraffiti]

Yeah, unfortunately. The price will vary a bit depending on your location but yeah :(

[@antielfbar2435]

Benjunkiecap berlin !!!!!

[@bimko.]

You can make one for less than 1 dollar

[@ScizGraffiti]

True, I think that's their business model, make by hand and sell for a lot. The shape of this cap is identical to the old ironlak sharpshooter cap so I have a feeling they're using something similar to that and just modifying it

[@bimko.]

@@ScizGraffiti yes that true. Btw pls can you hit me off in next unboxing wideo? "Peok"

[@ScizGraffiti]

@@bimko. yeah for sure, I gotta start getting through those names!

[@bimko.]

@@ScizGraffiti thx dude!

[@dichterdichter3593]

25 for 10 Dollars? God, America is expensive. 10 caps are 2 € in my writers shop. 10 dollar for a cap (that isn´t a stencil cap) cannot be worth it. A self built "junkiecap"(a needle cap with a syringe needle molten into it) should do the same job for a few cents.

[@ScizGraffiti]

I am Canadian, not American, just so you know. (we don't like to be mistaken for them haha). But keep in mind our dollar is worth way less too. ut a junkie can in cheaper no matter what like you said!

[@dichterdichter3593]

@@ScizGraffiti Ok, that really makes a difference in the budget. I am sorry, i do not get the last sentence, perhaps a speech barrier, my english isn´t that proper. That is what i meant with a junkiecap, if you do not know it already: kzbin.info/www/bejne/gqjCpnZrgq94iLs i use it very rarely, it is a charm if you want to paint hairs, or similar fine details, but it clogs after a few minutes, and after a day there isnt any way to blow it through, not even with acetone. I don´t see much difference in the results, just in the budget.

[@ScizGraffiti]

Yeah the junkie caps are great for character work. And sorry about my last sentence. It has like 7 typos in it 😂😂

[@Donut.79]

Any graffiti paint or caps ordered are overpriced no real graffhead ever paid for paint especially when shit is getting buffed faster these days so why shell out 5 plus dollars and up.

[@ScizGraffiti]

People have different ways of doing things and I hope everyone is smart enough to know that their way of life is although one that is fine, is not better than anyone else's.

[@giuseppegaetano3310]

🤟🤟🤟🤟🤟🤟🤟✌️✌️✌️🤙

[@yuzking4068]

U make me skip..skip...and skip....bla....bla....bla.....

[@ScizGraffiti]

You're welcome to go find a better or more comprehensive review of the cap elsewhere

[@daanieuhejh3598]

you can buy 2 ironlak cans... but who wants that hahaha ironlak trash

[@ScizGraffiti]

lol. people like me who buy the cheapest paint possible want it haha XD

[@daanieuhejh3598]

@@ScizGraffiti buy loop

[@ScizGraffiti]

@@daanieuhejh3598 yeah I haven't tried it yet cause there's only one site in my country that I know of that sells it and their shipping isn't great. But definitely looking to try it

[@alexsafonov7270]

this guy is annoying... blathering, talks too much. and then he puts the damn mosquito cap in his pocket. cool dude, real cool. blahh blah blahh. get to the point already.

[@ScizGraffiti]

If you don't like the video, then don't watch it idiot 😂🖕

[@Messermarkmauritz]

Dafaq is a vegan outline 😂😂😂 im old for this shit ! A can a cap thats it i dont need more ....