Ista Breeze i2000 Bench test part1

Hello KZbinrs
Today I will try to make some test of the performance of the Ista Breeze i2000.
The rpm, voltage and frequency, so if you have some problems with your wind turbine you can base on this measurement. In the next video, I will measure performance under the load.
If you have any questions, please ask in the comment section.
Thanks for watching, see you next time.

[@omdevs]

Nice work

[@afterworkcreation9394]

Thank you

[@Themachinewon]

Excellent video, this is the info people need from the company to plan out their purchase and equipment needs.

[@afterworkcreation9394]

Thank you. I just started doing video for YT and I am full time working person, so it's quite difficult to find time to do more and share.

[@MrSummitville-jx4fj]

@Themachinewon - So, what are you going to do with this information?

[@afterworkcreation9394]

@MrSummitville-jx4fj It's useful for many people. Also my goal was to determine the speed of wind turbine by frequency.

[@dennydewaal137]

Interesting would be to see the amps by the voltage under load ,, a clamp meter adit to the test so the wattage output can be calculated .. any way I’m getting one the i200 for the winter next year.. nice video

[@afterworkcreation9394]

Thank you.

[@Themachinewon]

I'm looking at the Heli 2.0 I'm hoping someone will do a voltage check on the same, for on grid

[@afterworkcreation9394]

Hi I will make another video about turbine test soon, my lathe isn't powerful enough to make power test.

[@afterworkcreation9394]

@@Themachinewon Hi. So far I know Heli is basically the same as i2000 they added plastic cover.and tilting mechanism.

[@dennydewaal137]

@@Themachinewon toys for whatts , has some i2000 videos..

[@robertoleszek8361]

Brilliant. Whats the power of electricic motor running the lathe?

[@afterworkcreation9394]

1/3 hp

[@dustinfrost5214]

Wheres the watts and amps

[@afterworkcreation9394]

The lathe isn't strong enough to turn under load.

[@konradmazur6204]

Mam problem z moją chińska prądnica (48V/2kW😅) po podłączeniu mostek prostowniczego 3P hamuje na wietrze do zera a wkrętarka nie idzie ukręcić? U Ciebie na tokarce też tak ciężko szło z mostkiem? (Mam niestety tylko TSA16 i nawet nie sprawdzałem czy pociągnie)

[@afterworkcreation9394]

Może uszkodzony mostek. Sprawdź czy nie ma zwarcia. A czy bez mostka i obciążenia też są opory?

[@afterworkcreation9394]

Na jaki prąd jest mostek?

[@konradmazur6204]

Bez mostka idzie ładnie jako AC daje 72V i na drucie oporowym spokojnie 6A (na każdej fazie) i wkrętarka DeWalt daje radę . Mostek wziąłem na szybką z zasilacza 350-500v na 48V , ale fakt bidny taki. Jutro zlutuje coś na większych diodach i sprawdzę na szybko. Dzięki za odpowiedź i pozdrawiam. Aha super test

[@afterworkcreation9394]

Jak masz stary alternator to tam masz mostek trójfazowy wytnij go i na krótko podłącz. Powinien wytrzymać do 150a a napięcie to do 60v

[@konradmazur6204]

Ok poszukam czegoś starego na złomie. Bez mostka idzie gładko a z drutem oporowym między fazami jest lekki opór ale wkrętarka spokojnie sobie z nim radzi