It's a G-Thang! Scale News Update - Episode 151

[@whistlinlipo]

I wish they’d release the Lloyd for my SCX 24

[@lsswaptheworld9092]

🤣🤣🤣🤣 knew someone would mention that!

[@Grimreaperrc]

So cool!

[@malmbergtube]

OOOOOHH! I hope the guest on Live Takeover is RCGirl! 🙏

[@scottoblander9419]

8v dewalt gyro of course. Thanks to you and Matt.

[@cozy_Fozy]

For a cordless power tool specifically for use on my RCs, I picked up the older version of the Genesis 7.2 volt Li-ion 2 speed driver from Amazon for just under $23 a couple of years ago. I modified mine by removing one washer from the clutch spring mechanism to allow MUCH lower clutch release settings, works great, and I am able to run screws all the way in without stripping plastic threads, no joke! Depending on the size of the hardware used on different areas of the truck, I use clutch settings 3 to 5 for reassembly, and can still crank it up to 9 or above to loosen/remove the same screws. It has been a hell of a good value! I use my MIP quick release bits with this tool. Thanks for ask'n!

[@rcdrives3882]

Sleeping bags $129.99 Thanks for the update, Josh :)

[@alexvernyi2368]

My allen keys and cross wrench that I use are my cordless tools of choice for rc.

[@dangerdeven]

"This is The Machine, if you feed The Machine vodka, you will have a great time"

[@rustysrcgarage6935]

That’s the first thing I thought of, also! 🤣

[@russellsowersby5840]

What movie is this from been thinking since I saw this and can’t remember

[@HarleyDesignsInc]

It’s a stand up comedy true story from a comedian called Bert Kreischer

[@russellsowersby5840]

That’s it!!!!!! Lmao love the snu man thanks for clearing that up tho I just watched it again. Can’t believe I couldn’t remember that

[@dilloncreel8461]

You win the internet today.

[@ianroberts8371]

I've had really good luck with the 12v dewalt drill/driver. The TJ body was the first custom crawler I ever made, stoaked its coming back!🙌

[@GeeShocker]

Favourite cordless tool? My Spektrum DX5R, followed by my LapSnapper timing system. 😎

[@jonthomas8487]

Favorite cordless power tool for RC is my Dewalt gyroscopic screwdriver

[@trusty2182]

M12 90 degree and straight die grinder. My favorite cordless tools I’ve ever had.

[@MarcoLemmetti]

Finally someone is finally coming back to re-releasing a TJ body. Was waiting for this

[@savagelife977]

My little snap on driver super nice works great love the news 👍🏻👍🏻

[@rcfanboys]

My favourite cordless tool is my drill/impact driver that I use to get things on quickly BUT I then to hand tighten everything with the correct amount of force

[@reggaejunkie8642]

DeWalt Gryroscopic screwdriver...hands down! Paired with MIP’s 1.5mm, 2.0mm and 2.5mm speed tip set...golden 👌🏽

[@jdsrcs8061]

A 24 Creep body, sweet!!!! I love my little dewalt driver that you and Matt use. It works great and fits perfect in my Carry All backpack.👍👍👍

[@WreckerRC]

My go-to battery-operated tool is the Milwaukee 12v screwdriver with an adjustable torque setting.

[@Mauq5_Rc]

Losi also added a steel center driveshaft to the v100 which is a game changer, in my opinion.

[@KTMcaptain]

My favorite power tool to use is my Kobalt 24v impact driver... It has a finish mode for drywall screws that stops immediately after 1 impact event and applies the perfect amount of torque in low mode. Then I finish off the torque by hand with my protek bits.

[@mbarton98]

favorite rc cordless tool is that Dewalt gyroscopic screwdriver.

[@astridsactionrc545]

I’m so happy the Grave Robber is back! Monster Hearse for the win!!!

[@edgardowong5935]

My favorite cordless tool is definitely a Sawzall lol

[@mikeblack2346]

Definitely my Milwaukee M12 Variable speed Impact driver. 🤙

[@leestewart5424]

Dremel Thanks for the updates

[@dirt5547]

I have a 2020 capo Jk Max and I have to say it was a joy to build and is a great performing scale rig.

[@rustysrcgarage6935]

Wouldn’t it be awesome if JConcepts makes a tiny Ford F’n Ranger for the 24s?? 🤩

[@Rs_customs_rc]

My milwaukee cordless soldering iron is definitely my favorite it heats up 5x faster than my protek soldering station🔥

[@ggwbrc]

OMG Nice model 😍 Thanks for the information👍

[@Evan_Moore61]

Thinking about this question I realized I don’t use cordless tools regularly. I have an ancient dremel that I use quite often, but that’s not cordless. I’ll use my drill for body post holes but that’s the extent of my cordless tool useage for RC. The DeWalt Gyro driver has my interest though so I might pick that up.

[@_carefulcole_4517]

I use a cordless skil drill. Had it for a year...works great. Super cheap...only gripe is that it's a micro USB.

[@visionary_rc7987]

Hope Losi does something with the old twin hammers. So fun to drive!

[@boldrbangr9834]

The Lloyd 😜. My go to tool is an OOP Ryobi adjustable clutch cordless hex driver. Use it a LOT!

[@themountain59]

Ryobi rockx!

[@jordanabegg7926]

"I am the Machine" Great videos ae always Josh!

[@99ramsport]

my ryobi driver had been my favorite for a few years. it doesnt have a clutch like others but half the price. i always tighten that last little bit by hand anyway.

[@rc-ingaroundamerica8792]

I use a small ryobi 1/4 driver, built in rechargeable battery, yet to find a truck it hasn't worked on yet in my collection

[@JessVideoDude]

Love this segment, my favorite tool is my Bosch 12v driver, the clutch is awesome, you can really dial it in.

[@BlackAndBlueGarage]

I like the TC Gray because I always paint the outside to show body damage 👍

[@markvasseur961]

Unfortunately I have not a 1 cordless tool, maybe next year!

[@RonBernardino]

Twin Hammers. Never Forget.

[@Coltron_Actual]

Favorite cordless for RC - DeWalt gyro screwdriver. (And I'm a red tool guy) Excited for the HPI Jeep TJ shell to make a comeback. Would go great on my still operating OG SCX10.

[@GreenJeep1998]

I was thinking the same for my flipped, stretched, and locked Wheely King that hasn’t changed much in the last 10 years.

[@lsswaptheworld9092]

7:21 one million dollars!🤣🤣🤣🤣

[@bucksrcworld8119]

I still need to get cordless tools and drivers.

[@blakemullins1903]

Dewalt gyro and my old 18v dewalt drill

[@alfalso434]

Good morning, the Corvette looks awsome. That's one to add to the collection lol. Really dig the lil sleeping bags, Not sure how much they will be. Not sure I want to guess lol. Have you heard anything regarding Axial fest Badlands at all? Thanks.

[@smokin0137]

Badlands tickets are on Eventbrite. But not west coast.

[@alfalso434]

Nice. Wasn't sure if they were selling yet. Thanks! Been watching the Axial site. But with no luck.

[@vincec9451]

Yup i got me a ventra,car n truck, r they collector items??

[@GreenJeep1998]

I had heard the Grave Robber was coming back, but didn’t know know that the TJ Rubi body was too, now I need both! For a cordless tool, I have an old Black and Decker cordless drivers that gets used all the time and have run the battery down mid build/mod.

[@bobcatm3462]

Oh goody.... Just wrecked my last hpi tj body... OG from back when they were the go-to... $40/ a bag... And my Dremel tool

[@myjrbear]

Can't find the new shirts anywhere?

[@darkhorsegarage9623]

I use a small snap on bit driver . I have two of them and three batteries from my old job. Work great with a super clutch.

[@Boss-dr2zk]

My fav cordless tool is a screwdriver🤣

[@paulclancy2404]

My favorite is the m12 , 1/4 drive, I need a better dremel probably get the one you have there ,

[@srhcat72]

Snap-On 1/4 inch driver. Didn't buy it for RC but that's what it's used for now.

[@shadow7796]

My favorite cordless tool is probably a "toss up" between a dremel 4300 and my 12v Dewalt drill/driver.

[@LRCR]

Thanks again for the update on the Hobby ✌️🤠👍 HFLPRCing 👍😎👍 AOAH 🌟 RCF4L 🙏 Stay Safe and Play Healthy My Friend

[@themountain59]

Einhell cordless screwdriver ...no fail in 3 years!❤️

[@jarbo7818]

I'm holding out hope for a Jconcepts Lloyd drag body

[@MikelangeloPhoto]

The Dewalt driver (same model as your) is my favorite tool... and yes... I bought it based on your videos/usage of the tool... #dewaltsponsor

[@byknmikerc7153]

For power tools for my rc's, I like my dremmel stylus lithium. Love that thing! Also I think the capo sleeping bags will be $40

[@brianherskowitz3020]

And I really love the Ascender line I have six of them wonderful capable Trucks yes they have other issues but super capable as is anything I guess

[@odomandr]

I'll believe hpi is back when I see stuff in person ..... Remember when the venture took 4 years..... I do as I'm still waiting on a clear body to paint for the one I have. Nice truck no support on it though...... The capo sleeping bags keep two fingers warm per bag at the cool cost of $63.79 bag/night The only cordless power tool I have for RC is the dewalt driver. It is the gyro without the pistol grip, should I upgrade to the new one.... I really like my 4300 corded dremel, my soldering station needs a plug too..... I am in on dewalt for automotive and home repair though with the drills/impact. And I'm looking forward to this new 12v stubby 3/8 drive impact they are releasing.

[@prinznapp2018]

I hoped for the Loyd24🤣🤣🤣

[@sugarfree850]

My Ryobi powered screw driver.

[@TheDeLeonGarageCollection]

I don’t own a mini power tool, all hands hear baby!!

[@jerryvolpini7987]

Josh: "The version of the Truman Show nobody wanted" Me: 🤣 Can't wait!

[@Jimmy2Horses]

Dewalt Gyro Driver for the win.

[@lillyjolenevilisvilis443]

As soon as I saw the V100 Camaro I said that's a Vatara.

[@mcdingus5081]

Favorite cordless tools: Milwaukee M12 system for the most part. But the Makita 7v screwdriver with the clutch is great- but overpriced.

[@mikeupton5406]

Yeah, R/C needs another Chevy body. I predict the the sleeping bag costs 90USD. Losi reissuing the VTA chassis is a step in the right direction haven't looked up the price yet. I am hoping for a sane pricing approach.

[@EugeneRCDrezgalovo48rus]

Awesome 👍

[@crazylarryjr]

I don't know, i kind of liked the primer look, makes for a cool sleeper look to me

[@gerrysoldguyreview]

Holy crap iam old!! I have both hpi bodys!!😁

[@dadsrcworkbench1322]

I use a Ryobi 4v screwdriver with my 1/4 inch drivers. I think my arms would have fallen off when I built my Gatekeeper if I didn’t have it.

[@danytremblay6168]

Hello, I think the bags will sell for over $35

[@izikhunter2041]

Saw the notification pop up and immediately clicked on it

[@BlueDually4x4]

All of my power tools have cords, because I'm cheap and they work.

[@slowcrawler2695]

Cordless soldering gun bernzomatic

[@rctrucktalk1149]

Same price as a real sleeping bag approx $105.00

[@toadady]

dewalt gyro

[@BlackAndBlueGarage]

Also, somebody please buy the twin hammers! Or horizon assign it to someone since they own everyone but Josh 😆

[@jasonchilson9230]

The bag 27.96 after tax to u no shipping fees

[@tymcleod7285]

I'm betting with the way capo is priced the bags are going to be somewhere between 299.99 and 349.99

[@dirt5547]

Capo usually carries a Hefty price tag, as for their accessories, they aren’t that badly priced for high end.

[@thomastrochowski655]

The sleeping bags $25.99 have a great week .

[@99ville]

I just bought a Vaterra Asender crawler is it a bad model, if so why?

[@WreckerRC]

$49.99 Scale sleeping bag from Capo

[@mbarton98]

scale sleeping bag $54.99 with an optional therma-rest pad coming soon

[@scalebuildersguild]

Oh great, the Creep...

[@BoringsHandle]

1:44 kyosho

[@strech5412]

Is Vaterra like Oldsmobile, Plymouth, and Mercury - perhaps Pro-Line will make a tough-color retro “Vaterra” body for the melancholics...

[@DDMSteveB]

‘Vaterr-uhhhh?’ Would have been the better tag line

[@SuperDrake79]

Yayyyy, "Creep" A.K.A. Lloyd24

[@jackgroeneveld7885]

90 bucks for the bed rolls as a pair

[@CoachD386]

I believe they've scrapped the drag slash for the 4Tec 3.0, but we'll never know! Nice to see my boy AJ's Firebird body on here...

[@rattmobbins]

Drag Slash is listed on the Traxxas website. Wouldn’t be there if they’d axed it.

[@CoachD386]

@@rattmobbins we were also supposed to get more info based on the initial picture that was released on 3/18/21, here it is 4/21? Might not be scrapped but they definitely went back to the drawing board for something that’s supposed to release in May and we’ve heard no more about it!

[@mikeabner9581]

Awwwww, c'mon J Co. we are all dying for 1/24th scale Ranger body. Y'all are slipping.

[@rezzrollinrc]

Rockstar and SnU ✊🏽✊🏽and phat a nvm happy 4:20 y’all

[@ruftime]

4WD Camaro😱 I’m guessing their milking the Camaro license for all it’s worth😎 Cordless Dtemel❤️

[@willanderson5088]

I’m low tech. I am the machine! Lol

[@powcar91]

my guess on the sleeping bags is 300

[@somechannel7083]

Vaterra has been on a downhill for a while always has greate bodies though

[@rong9912]

T shirts must be going up today unless I can’t find them on the web