It's crazy how everyone hated this idea but now they love it 😆

[@jamesglenn2006]

Were people hating on the roof, or were people asking "why are you always in a rush?" " Chad, slow down" . Lately, its " Let Derek do what he knows how to do". I read your comments. Hate is a strong word.

[@littlered1880]

It’s not a chore, let the carpenter cut the slots

[@PeteRubalcaba]

Lord help chad

[@20twenty4can]

Let the ole guy demonstrate how it is done. Then realize that when working with wood or timber one must slow down and measure twice and cut once. Derek has a lot of knowledge and he's willing show and share it with you Chad. Don't miss the opportunity mate to learn from an ole timer.

[@mikeschauger5498]

Chad's at it again, he thinks he has seen anough that he can take over the job. LET THE WOODWORKER DO IT AND YOU STICK TO THE METAL WORK!

[@BruceWitcpalek-ws1rh]

Calm down. You have no idea what Derek has Chad doing. Remember, Derek is old and he might be telling Chad to do this and do that even though it don’t look like it. Let the process play out. You guys have got to take it easy on bad Chad and quit being so damn negative to him.

[@danielplummer6385]

Derek is teaching Chad and when you teach someone you must let them do some of the work to actually learn. If Chad were doing that bad Derek would have stopped him!

[@troymarable7537]

⁠they can’t because they can’t afford it or do what Chad can do. I mean you really have to be a miserable person to come on here and bad mouth another man every day. About something you can’t do any better than him. Look guys go get a life please.😅😅

[@BruceWitcpalek-ws1rh]

@@troymarable7537 perfect 👌 perfectly said Troy. Thanks for giving bad Chad and his queen some loyalty like they damn sure deserve !! Peace, brother ✌🏼😎💯

[@RandyJacobsen-m5w]

@@danielplummer6385Derek may be teaching, but Chad is not learning. Call me a hater if you wish, but facts are facts.

[@ThomasHoltje]

2 bad cuts 10 minutes Derek 3 day no bad cuts

[@BigDaddykik1973]

Oh well Derek asked him to do it

[@troymarable7537]

That’s how you learn by doing it yourself.

[@howquick]

It'll be fine...and you're gonna be ok

[@mrfatbobrider1969]

@@troymarable7537 yes true, but if you’re just learning it would be wise to do a practice run on some scrap timber before starting on the project itself ? At least he didn’t cut right through I guess and he got there in the end

[@TimAdam-f7s]

Watching Chad try to do woodworking is painful.

[@Charlee-w1u]

345 k subs, must be doing something right🙂

[@kennymckinnon4821]

Like watching you comment hahaha

[@mrfatbobrider1969]

@@TimAdam-f7s I’m watching Derick 😁

[@darrenhines258]

@@TimAdam-f7s 😁

[@edwardbrowne223]

He's not symmetrical.

[@richurban659]

Chad Slow down let the Craftsman roll silence is golden

[@alansargisson5792]

FFS let the wood guy cut the slots.

[@lindahietpas3852]

I've been a seamstress over 50yrs. Burlap is a big no. Use cotton duck cloth. It will add more stability

[@stevo184]

Derek's such a likeable person, why can't Chad just let him do it instead of coming in at 100mph with his zip cut? It would annoy the heck out of me.

[@BigDaddykik1973]

The dude asked him to stop being a hater

[@wesleypulkka7447]

Srevo, Why can't you switch channels? You obviously don't like this one. Just go away OK?

[@jessasto947]

Annoy, eh? Go annoy somebody else, Srevo!

[@mrfatbobrider1969]

@@jessasto947 That’s the one mate some of these subscribers think others aren’t allowed an opinion, they also tend to forget that Chad has said comment good or bad and if you like take it if not throw it away so I don’t see a problem with anyone placing a comment just those that say if you don’t like to go away , good on ya for speaking out how you want

[@MarkBindley-uc6zh]

@@wesleypulkka7447 keep scrolling if you don't like the comments lol,who forced you to read them you

[@steves2241]

I am pretty sure not everyone loves it, from what I have seen a lot of people still hate it, but they all do like Derrick, and respect his work .

[@NYPatternMaker]

Derek seems like a nice guy, but the woodwork leaves something to desire.

[@NYPatternMaker]

Derek seems like a nice guy, but the woodwork leaves something to desire.

[@BruceWitcpalek-ws1rh]

Only a few of the haters like you still hate it. But yet you come back to watch the video every single day. You know what that tells me?? You’re a freaking liar and a hater !!! if you hate this channel like you say, you would not come back and watch every video !! Now go on with your nonsense and hateful life, but leave bad Chad and his queen alone !!

[@wallymacmillan5696]

Its only in the rough so far but im sure with this old chap,it will look great when hes done,​@NYPatternMaker

[@malcolmlester4585]

@@NYPatternMaker nothing wrong with the woodwork.looks great and suits the era of the car as its the way it would have been done in the day.

[@mikemurphy7519]

This will all probably work in the end, but the lack of precsion and not using the right tools for the job would make me crazy.

[@edwardbrowne223]

I'm just besides myself, watching Chad wanting to be a wood worker 😮!!!

[@LDReynolds1]

I love the image of the eventual result, but as a woodworker it was painful to watch. The rushing and not holding the saw plate even with the wood surfaces, was killing me and not employing a simple chisel and hand saw for refinement of cuts was AHHHHHHggggh. I have never been one to stress about this stuff and never yelled at the TV but today I did. 🙃

[@EricClark-io7rf]

Most of the builds over the years I often think this is going to be interesting but never hated . Always enjoy the talent of the builds and to see Princess Fina do what she does best. Thankyou team Hiltz for the entertainment and education.

[@jerryscray1789]

Come on chad!!!! Let derek do the cutting and fitting wtf

[@rongladden809]

Derek is full of knowledge it is nice of him to come and help on this project. Great work everyone

[@TimAdam-f7s]

Make Chad stop. Let Derrick do it. Chad is screwing it up. You can't se ta depth with a grinder. USE THE SAW and CHISEL

[@MrBmxbrawler]

Its Chads. Leave it be. Derrick don't need to do it all. Team work

[@ricknelson-cq7di]

A craftsman and a crapsman working together.

[@jessasto947]

@@ricknelson-cq7di, real original Gomer, did you come up with this all by yourself?

[@jamesmerecki3128]

It’s time for you to change channels…perhaps watching the Teletubbies will better suit you…

[@craiglockyer]

Derrick is certainly a skilled woodworker. So Chad, let him stick to the wood and you stick to the medal. Going to look good!

[@williamdenny891]

Why don't you let Derrick do the work, after all you did hire him for the job, and are paying him not to stand there and watch you attempt to do it🤔🤔🤔

[@JefLeopard-D]

Maybe chad wants to learn a new trade? Some people work better hands on rather than being showed

[@paulschofield1531]

Somewhere Norm Abrams is shaking his head....

[@georgedonechie2360]

Dereck is such a nice guy, would love to have him as my neighbor and learn some woodworking skills from him.

[@darrencoles3593]

all thumbs up its going to make it keeper for the collection

[@DennisCuster-v7w]

It looks like chad is pushing him out of picture

[@BruceWitcpalek-ws1rh]

Why must you say stuff like that? Just let the process work itself out. Always always negative people who just cannot stand it when bad. Chad wants to learn something that he does not know how to do. How do we learn things by trying it and by doing it and not by watching someone else do it !! Derek got him pointed in the right direction and he’s doing what Derek tells him to do as it should be. That’s how we all learn by trial and error.

[@mohrtechgaming1004]

As always, This is your car, your ideas matter. It is always nice to see what comes together from your imagination. Most of us wont see what you see, because you get to the point where you see what it will look like at the end. We wont see that till the end, so you have to work with us that do not have your vision (up front). I enjoy the ride either way. Thanks for your effort and patience.

[@20twenty4can]

I can't watch this one. Chad is making one hell of a mess in front of a pro.😆

[@jessasto947]

Where are all these nut cases coming from, like fart can? from hell?? 🤣🤣

[@rodmackinnon8497]

😂😂😂😂

[@dcwebb1]

Derrick has the wood skill, Chad has the metal. Therefore, let the wood man do the wood, the metal guy do the metal.

[@richardmcbride7180]

derrick is the craftsman and chad is trying to micro manage every part of this top project

[@BigDaddykik1973]

LOL man come on give it up will you

[@claudeperron8197]

Thanks Derek for sharing your great knowledge of woodworking with us! Looks mighty fine and can't wait to see the final e. tc all.

[@stevensimm7961]

Nice shape to the roof now looking good chad ! I think bringing Derrick in was a master stroke .

[@duaneayers6117]

At least Chad isn't making the roof out of strip on chrome strips.

[@MrHowlor5]

Derek….. Go home…. Chad now knows everything about woodworking…. He’s used you!!

[@jerryscray1789]

All that work into a car that should have had the mechanics and drivetrain done first. I sure hope he gets it running and driving before moving on to another one

[@terrygrant4014]

Slow down Chad and listen to,

[@michaelmorrow6853]

How many is everyone? A lot of people in the comments love what you're doing. Maybe say "some" hate it? Some love it.

[@steves2241]

I have seen a lot of people say they hate that Chad chopped the car up, and a lot of comments saying they hate the wood roof, but now that they have seen Derrick do it, some of them have changed their minds. In no way does everyone now like it, so once again Chad has made a statement that is not 100% accurate.

[@wesleypulkka7447]

@@steves2241 BS!

[@christopherpeterson1400]

Can't watch , this was going good but seems to be the carpenter is losing the lead..ugh

[@howquick]

You know....saying "can't watch"...but then watching anyway...is still watching 😂😂

[@jessasto947]

This was going good, until you showed up troll! Now, move on along and go watch something "good"

[@Gts5654]

Woodworking guy did an amazing job throughout the whole job and Chad tries to take over to screw it all up. The usual. It’s comedy hr again. 😂 Wait till Chad takes his favorite tool “the zip cut” to the whole thing to “straighten” everything out. 😂 tune in tomorrow for another comedy hr to watch Chad screw all the woodworking guys work all up and then it will match chads work. Can’t have anything look good.

[@EDoubleDIE-td2un]

Imagine what y'all would've done without Mr.Derrick, that ole man is precise with that saw he knows his business as they say. Respect

[@Danny-s8h]

Great job guys looking Beautiful 🙏👍😎🍷

[@BruceWitcpalek-ws1rh]

Yes, it is ✌🏼😎💯

[@stanmuneoka8117]

I think it's always interesting when you have a professional join the show to showcase their talents as we learn too.with your ideas

[@rickproehl2716]

Let the woodworker take the lead!not a race.

[@russgould7458]

I’m surprised Derek didn’t bring a counter sinking bit

[@howquick]

Did the drill bit work?

[@EugeneLangowski-g2n]

Exactly why didn't he probably has one in the box

[@howquick]

@EugeneLangowski-g2n well....did the drill bit work 🤷‍♂️

[@Jess-bs2jw]

Derek has patience and skill He stays focused on his work I think Patience is one of the most important things we can our teach kids

[@ronaldquillen5713]

I enjoy the videos, and...> know it's Chad and Jolenes car, and Derek is so patient. He's the wood guy and I'd like to see Chad let him work his expertise. Does everything need to be done in an hour?, we'll be back next video to enjoy! Many blessings from Ohio.

[@robertthomas5590]

Stop complaining about the dust and put a mask on. Very basic...if your heath matters.

[@nathanchalecki4842]

Mate he doesn't even use a mask for cutting and grinding glass 😂

[@mrfatbobrider1969]

Souls just let the tradesmen do the carpentry, that cut looks ugly, the man has the tools and so no need to use ya grinder and then say my zip cut will do a better job .. WOW You might as well just go home Derrick and leave him to it , I don’t understand why he isn’t getting you to do your magic that frame was looking Good all round before , I know ya probably never see it but that’s not really the point be better off using a rasp instead of the death wheel

[@BigDaddykik1973]

You should have Derek build you a workbench

[@pr10r87]

Damn man! Just let the old guy work! He knows what he wants and when he wants to do it. Dontcha think he’s done it a time or two already? It’s like you need a strong sedative before showtime. Slow the hell down and pay attention. The work will always be better when you take a few seconds to look and think before jumping in and then doing it half-ass’d! You should be learning from this man’s experience and you dont even observe him before taking over like you’re the woodworking craftsman or something.

[@michaelwalsh98]

Bad Chad reminds me of the sign in the Garage my buddy had, it said Shop Labor Rate $85.00 an hour, if you help $150.00 an hour !

[@jerryfaulkner6518]

It's, like finding out you are going to watch a wreck. You realize it may tear you up, but there's nothing you can do about it. 😂

[@BigBlock-wf3mh]

Huh?

[@jessasto947]

Well, you're a real wreck. Make some sense, then try again okay?

[@darrennelson631]

Derrick is doing a brilliant job he knows how to work the wood his knowledge will be mist when he passes on .👍

[@mikepeters4916]

Chad, my therapist told me to stop watching you cause your balls to the wall working style is triggering my anxiety disorder 😢

[@derangedhermit2879]

I agree, all the weak minded control freaks, & hate filled toxic know it all, mental head cases should be seeking immediate help for their conditions, & watching other channels, instead of whimpering & obsessing here about what they can’t change…🤔

[@JefLeopard-D]

Go watch another cookie cutter “barn find, will it run again” boring show..

[@alpeach9480]

@@derangedhermit2879 And come back every day for more !!

[@tommalchert416]

let the carpenter do the woodwork !

[@kevinhamling1963]

I love what your doing Chad. This is going to look awesome.

[@johnmcmahon3436]

Chad mixing glue and saw dust to fill joints 😂. They’ll be screaming get away from it 😱

[@EugeneLangowski-g2n]

I've done that

[@mikepeters4916]

That's a good way to do it, woodworkers trick of the trade

[@woody9052]

You need to have Derek sit down for 5 minutes and have some coffee ready for him.

[@mikepeters4916]

Oh heck no, DON'T GIVE HIM COFFEE!!!😂

[@rcpilot1963]

Thanks, Derick, for helping Chad

[@wscottlockman]

It is coming out really nice well made it should be beautiful when it's done

[@darrennelson631]

Hope we see derrick a lot more he a person that can show a lot of knowledge to Chad's viewer's.

[@bendon1303]

Slow down chad!

[@jacobkamakian1752]

We hope the hell you don’t say later you built that top,, give a man credit where it belongs.. HIS NAME IS DERICK..

[@charlielemmons5525]

Its actually taking shape, but i do believe a router could hav saved a lot of timd and trouble. I would also help with the edges.

[@wallymacmillan5696]

I agree and not hating but a grinder has no place in wood working

[@alpeach9480]

@@wallymacmillan5696 When using an angle grinder with a sanding disc on it, are you grinding or sanding ? !!

[@wallymacmillan5696]

@alpeach9480 hmm I'd use a belt sander

[@danielplummer6385]

Hi Chad, Jolene, Derek, & Fina Happy Friday to all! Looking good Derek and Chad! Derek does really nice work and he takes his time and gets done pretty fast. Chad and Jolene I really appreciated getting to watch Derek work as he is a real craftsman and he is also patient and a great teacher! Chad you did a good job helping him as well. Jolene thank you for another great video and we are very fortunate that Derek was willing to do the work on camera!

[@finznscaleskzn1884]

Love it!! Very creative 👌

[@wadehoran2270]

Why is everything such a god damn race...geezus. Running around, tripping over tools, working off the floor. Seriously?

[@jerrybailey5797]

I tell you wat, you guys have done a real nice job on the roof , Chad and Derek , it's looking great 👍

[@mrfatbobrider1969]

Hey FINA how are you today ? I see that your name translates to the word Beautiful, how nice and how lucky you are to have owners that take very good care of you, looks like you could use a companion to be able to play and run around with you, enjoy your day FINA my grandchildren would absolutely love to play with you, they all love dogs and they love when they come to visit to see us and play with our dog CJ He’s really cool dog too and is always so very friendly to everyone that comes to visit…

[@marybeaver7345]

Ya Chad let him do the job you bother him like you did with glass guy just mine your own beeswax mb

[@rickcasey611]

Nice work Derrick

[@billthompson715]

I was hoping the old guy would teach him better wood work.

[@johnthomas6745]

If you're getting dust in your eyes, for crying out loud, PUT ON GOGGLES.

[@jooba67]

Chad's been doing this for a long time. I'm sure he gave his design a lot of thought. We need to let him modify this car and go with it. Forget "about leave it stock" That ship has sailed. I like the look and lines so far. It definitely looks more appealing/better.

[@BruceWitcpalek-ws1rh]

Very well said !! The haters complain Every time he starts a new build, but most of them come around as bad Chad gets into the project and they see how much talent he actually has. They personally hate bad Chad, but they love the channel. Figure that one out. Peace brother. ✌🏼😎💯💪🏼

[@deanburke8243]

I agree totally!!

[@georgeperkins9381]

Very nicely done Derrick, I think Jolene will be happy with his excellent work, a lovely gentlemen, you should be very pleased

[@kurtlutat]

slow down chad you cant fill with a weld

[@derangedhermit2879]

Just speed it up & fill it sawdust & glue! 🪚

[@robertbeam1809]

it's more period correct than the tubing.

[@aceh1466]

Let the carpenter do it before you fuck it up

[@chrisallen2005]

It has already reached that point.

[@needaman66]

Chas starting a second channel folks "Chad's Wood Butchery" 😂

[@GregoryBamber]

It's not that people hate you customising a car it's the fact that you picked a good original cabriolet to do it. If it had been a roadster most people wouldn't have cared. Most people who like customs like Carson style tops.

[@jessasto947]

There, you feel better now? It's his to do as he wishes with it, whiner. You should have bought it from Bad Chad when he offered it to anyone who wanted to buy it, several weeks ago.

[@petergoulah8762]

It’s looking great Chad. You and Jolene will look fantastic cruising around Nova Scotia. Loving the mods.

[@gregoryp9217]

These old school Guys never take ya to the cleaners when it comes to charging for their work , I would not doubt he said no charge. I worked around old school woodworking guys like this. He's very lucky to have him helping. You don't hear one curse word out of him .

[@StephenCann-to4mr]

I like what use are with the roof it's coming long good keep up the good work you Derek and Jolene always do good on the camera

[@rolandrochon343]

It look so good. Can't wait to see the beautiful end product.

[@fredhug85]

Great progress to have a specialist to be your guide 👍Just a thought might be an idea to have an upholstery craftsman give ya a couple ideas about headliner. The best 👌

[@jimfacinelli2585]

turned out great thats exactly how I envisioned the basic frame to come out. congrats.

[@iansaunders7090]

Tell Chad to put the zip cut down and let Derrick do it properly , he is ruining what was a perfect job !!!

[@darrenhines258]

Chad you're clueless with wood let the old guy do it and just watch from afar..just can't help himself butting in!

[@orfy123]

Slow down, think and listen.

[@freedomcanada8397]

Go buy a damn work bench with a vice. Honestly, it's like watching a kid work that can't think what would help him every danm day. Everything u do will be easier. Why not just put that chop saw on the floor? Oh ya thats dumb

[@JefLeopard-D]

People fussing over a bench..are you doing the work? Why not let someone work how they want to work? Oh yea that’s dumb…

[@freedomcanada8397]

Anyone who has ever worked at a job site knows the first thing u do is make a work surface. It was OK at first but come on man years later and still working on the floor.

[@EugeneLangowski-g2n]

He has had all that and more he doesn't need it people give him tools all the time he doesn't like cordless tools either

[@JefLeopard-D]

Come on man….complaining about someone using a bench or not is well, just complaining to be complaining… I use a bench, i have several, but i also sometimes work on the floor. It just depends upon what i’m doing. But, i in no way shape or form care how another man works or think i have the right to tell someone that has nothing to do with me how to work You gave your advice like the other complainers.. I’m certain that it’s duly noted. Why not let a man work how he wants? You know freedom and all that good stuff

[@brendanmcghee5893]

I think you are a tad optimistic 😞 good to see a talented craftsman doing his job correctly I hope you learned from him. There jury's still out regarding the car personally I think it's too short for this kind of look but we will see.

[@milesbackman3823]

Jury's out on a original body 39 model A?

[@derangedhermit2879]

@@milesbackman3823 It’s a 1934 Ford Cabriolet, that looks a lot better chopped & lowered down, to all objectively minded people…👍🏼

[@NYPatternMaker]

What makes you think everyone loves it? The woodwork is amateur at best.

[@BigBlock-wf3mh]

I see PatternHater is back, I thought you were gone for good, with all the complaining & whining.

[@nurzumkommentieren5762]

That's an insult to amateurs. Even an amateur would have marked what needs to be cut, used wood tools and adjusted the ends of the crossbars instead of wildly cutting out pieces from the stronger parts in the back. I am just waiting for him to get the wood welder. But on the ither end: it's his car, he needs to be happy with the result.

[@Mattlawton-ft6ew]

No its not to bad

[@mrfatbobrider1969]

@@nurzumkommentieren5762RideOn man 👌

[@rodmackinnon8497]

😂😂😂😂

[@jjfalarka8837]

Absolutely awesome . And the haters can change channels as they have no experience.

[@BruceWitcpalek-ws1rh]

AMEN BROTHER ✌🏼😎

[@jamesgorman108]

Chad you got to listen to what Derek tells you he is the professional with wood you are the professional with metal but you're working with wood lol

[@RonaldDavisArt]

No, I still hate it.

[@lawncuttingplusdelta]

Well at least u love the channel 👍🏻

[@TheMineas]

Have you seen Chad's super woman, does yours scare you when you go to bed?

[@francinechretien1454]

@@TheMineas What about yours ?

[@derangedhermit2879]

Ronald Davis appears to be some sort of artist, & yet he doesn’t have any sense of style or vision…😖

[@timbrown2579]

Looks fantastic, Mr. Chad you're a visionary!

[@DerekWarnock-u2f]

You two do you !! and haters gonna hate but yall r great and dont ever forget it!!

[@108_yankee]

good job mate ! BIG👍 -polish man 😎

[@rsgrsg1361]

Hard to picture things from a blueprint in someone else's brain. But I like it so far.

[@natvson]

The title if this Video tho , and I'm only adressing the title ...Huge misconception , could be same amount of haters just maybe more ppl tuning in to see how a excellent wood craftsman works ... Then back to Chad hacking things up with that Zipcut , ' that's OK ' he says on the first cut on the back curve but it's not , not square like the rest that Derrick did but ' that's close enough ' seems to be Chad's Mantra SMH ..How to screw up perfection

[@victor61116]

A spokeshave is all they need for final shaping

[@randycombs6720]

Enjoyed seeing a Old timer doing his thing and teaching us a thing or two. Thanks Old timer

[@Pwandlina]

Jolene give Chad something to do away from the car. He's like a bull in a china shop. Keep him off the coffee.