YJL- Hi Nu Gundam Ver Ka │Resin kit Review

  Рет қаралды 32,562

ItsAGunpla

ItsAGunpla

Күн бұрын

Пікірлер: 108
@knightghaleon
@knightghaleon 2 жыл бұрын
6 months? Damn! I can imagine having to walk away from it for a bit just so you can return with fresh eyes later. Glad this thing has finally been completed. You must feel great pride for having accomplished such a difficult model. This kit is meant for the madmen of the hobby.
@megaflux7144
@megaflux7144 Жыл бұрын
right? talk about bang for your buck!
@Wreck1990
@Wreck1990 2 жыл бұрын
THERE'S A GUNDAM DOWN HERE!
@Dynamodel48
@Dynamodel48 2 жыл бұрын
I really appreciate this review. Good to know im not the only one that had issues with marker softer and setter. Mark setter makes splash 2kclears tacky it sets up but it can leave prints if you touch it too much. i miss your paint reviews and tip videos.
@jasongotshadowbanned
@jasongotshadowbanned 2 жыл бұрын
I just bought this kit and I'm very much looking forward to the challenge.
@KA55123
@KA55123 2 жыл бұрын
This is so far above my level. Thank you for sharing the experience with us. Big Love from the UK. You should keep the tag line "eat ass, live fast" had me rolling cos you know who wild us gunpla builder are! 🤣
@RevanR
@RevanR 2 жыл бұрын
That details... Man that's quite detailed Hi-Nu
@Eisenight
@Eisenight 2 жыл бұрын
Love the amount of details in this. Nice decal work too man.
@TheShadowseesyou
@TheShadowseesyou 2 жыл бұрын
Hope this helps keep up the great work
@ItsAGunpla
@ItsAGunpla 2 жыл бұрын
no Joke, your super thanks are more than this channel makes!!😅😅
@TheShadowseesyou
@TheShadowseesyou 2 жыл бұрын
@@ItsAGunpla always a pleasure
@MYTHNL90
@MYTHNL90 2 жыл бұрын
That a lot of tuna
@theswedistanihobo4334
@theswedistanihobo4334 2 жыл бұрын
Before I forget, this one is for Papa Gundam and the algorithm!
@khactuan8539
@khactuan8539 2 жыл бұрын
Finished mine about 2 weeks ago. Didn't really have any issue with the knee joints. For the stand scratching the fuel tank, sanding down the size is such a crucial information , wish I didn't paint my stand at all..., so I ended up chipping the circular part on each size, but since they are not glued, simple to repaint, and very well hidden I'm not so worried about it. Because I painted this with my own color scheme so the most difficult task was to figure which color go to which part and the masking orders. Nearly burned out when I had to apply decals for the fin funnels. That was hellish.
@kopo7466
@kopo7466 2 жыл бұрын
Man, love your work and your ACTUALLY informative reviews! 👍 When I went to build my MG Deathscythe Hell EW and MG Heavyarms Custom EW (Glory of the Losers version), I knew EXACTLY what issues to look out for and expect. Your work inspires and your reviews help a lot, keep up the good work 👍
@Gundumb_guy
@Gundumb_guy 2 жыл бұрын
Man.... it takes me 3-4 months on my current custom builds so this thing would take me a year for sure! Great review, per the usual, and great results my friend!
@badzilla1173
@badzilla1173 2 жыл бұрын
Had some buddy's talk me into getting a gundam. Bought a high grade 00 command qan[t] from target. Loved building it. Used your link to buy a master grade jesta. Can't wait to build him. Love the vids brother, keep em up!
@AriesTabletopModels
@AriesTabletopModels 2 жыл бұрын
This is sick! I love seeing your videos on builds like this because my acoustic ass could never put something like this together without pouring laqcuer thinner into my eyeholes.
@alexander2019.
@alexander2019. 2 жыл бұрын
The amount of detailing in your builds is just immaculate. I’ll build a kit one of these days.
@spiekerboxx
@spiekerboxx 2 жыл бұрын
I have never had mark softer eat through paint but I would be so upset in that moment. Love the channel and the work looks great as always.
@printisdead1983
@printisdead1983 2 жыл бұрын
Gundam ive never seen anyone paint a gundam like you paint that gundam gundam
@Gunplahrazzi
@Gunplahrazzi 2 жыл бұрын
The fins are 48 parts and 7 layers of masking of colors was a great build about todo again soon 🔜
@ann3thrax
@ann3thrax 2 жыл бұрын
I definitely did not know prior to ordering my resin kit that there were special masking sets premade for them. Informative video!
@dragoonzen
@dragoonzen 2 жыл бұрын
6 months, wow, your awesome for staying together to build this regardless of the problems you went thru
@Herf18
@Herf18 2 жыл бұрын
Even though it can't be moved much, it's still sexy as hell
@elvisvalentin3010
@elvisvalentin3010 2 жыл бұрын
Yes a talking review, and not a musical camera panning. Love these vids
@phoebea
@phoebea 2 жыл бұрын
A suggestion for your tag line: "plastic crack ain't whack." Great video as always!
@MYTHNL90
@MYTHNL90 2 жыл бұрын
6 months?? Finally it's here!!1 :') Amazing paintjob and video production papa G
@DCG909
@DCG909 2 жыл бұрын
Managed to find the paint kit for providence by pure chance, Immediately bought it. Paints are odd in The Netherlands... would love to find some gaianotes... The kit looks fantastic, unfortunate that it's a brick though...
@ZDALI14
@ZDALI14 2 жыл бұрын
Been a while. Nice to see you back
@mortcraft23
@mortcraft23 2 жыл бұрын
This is an amazing looking kit and I love every detail on your build, awesome job!
@clintreed2064
@clintreed2064 2 жыл бұрын
Such magnificent detail. I get so bogged down in the details that I can never finish one. Before I know it I have repainted something a dozen time or more and then I get burnt out. You are a true hobbyist.
@stryderprime
@stryderprime 2 жыл бұрын
This is definitely a show piece you have here. I am not a resin fan but I really like the hard work you put into this. Excellent work!
@deathsnitemaresinfullust2269
@deathsnitemaresinfullust2269 2 жыл бұрын
The friggin details on this are Ridiculous, it's almost something you need to see in person to truly appreciate and be able to notice everything. Looks Absolutely Amazing 😄👍
@Shaddosa
@Shaddosa 2 жыл бұрын
There is something about listening to a professional talking about their field. Thank you
@ItsAGunpla
@ItsAGunpla 2 жыл бұрын
if I was a pro I'd make far less mistakes lol.
@Goblin08yh
@Goblin08yh 2 жыл бұрын
Amazing kit, Great job on it man!
@abrhams12
@abrhams12 2 жыл бұрын
Absolutely beautiful work. The Hi-Nu is easily one of the best looking Gundams and your work on this further proves it.
@ArtBykenzo
@ArtBykenzo 2 жыл бұрын
Thanks for another great video, I think it looks amazing as always 💜
@deaelbowe4146
@deaelbowe4146 2 жыл бұрын
Love seeing your work. Keep it up.
@diabeticmonkey
@diabeticmonkey 2 жыл бұрын
That looks TOO good. Absolutely stunning work, dude.
@Spardin
@Spardin 2 жыл бұрын
looks epic! keep up the great work
@krackinwise2123
@krackinwise2123 2 жыл бұрын
This turned out great love your builds.
@Alucifer555
@Alucifer555 2 жыл бұрын
Your 6 months effort turned out absolutely amazing. With all the cons you still managed make this kit stunning. Keep up the kickass vids 👍
@gir240
@gir240 2 жыл бұрын
That's more time I put in any project lol. The grind is real.
@davariusjessup3943
@davariusjessup3943 2 жыл бұрын
"Every paint chip is proof you wasted your life" - Gundam
@IRJOE5
@IRJOE5 2 жыл бұрын
Absolutely amazing Gundam!!!
@joshuastandish8581
@joshuastandish8581 2 жыл бұрын
nice work IAG but that six months of hard work for you!
@ennuiblue4295
@ennuiblue4295 2 жыл бұрын
I didn't know what Glundim was before I saw your channel, that's more work than actual jobs 😴 you're dedicated!
@thebigbient8736
@thebigbient8736 2 жыл бұрын
“NEVER STOP BUILDING” and “SHOOT FOR THE STARS!” Im dead bruh! 😂 FOR REAL THOUGH! 👊
@scasimir1000
@scasimir1000 2 жыл бұрын
gorgeous
@MrZoichi
@MrZoichi 2 жыл бұрын
Things I could never do myself, Exhibit A.
@Gunplahrazzi
@Gunplahrazzi 2 жыл бұрын
My backpack 🎒 didn’t fit well too
@sketchtherapy1218
@sketchtherapy1218 2 жыл бұрын
Finally! (i love your Art)
@Kenny_F91
@Kenny_F91 2 жыл бұрын
I heard people did commissions for gunpla but I never how true is was until now.
@ItsAGunpla
@ItsAGunpla 2 жыл бұрын
There are ton, but you have to be careful and do research someone reached out to me about repairing parts from a well known etsy Seller. This group obviously speed builds parts and leaves sanding marks from 320 grit paper on joints and just paints over it. The sells the kit for 700 dollars. Some commission guys just put decals on a plastic kit & clear coats it then asks for a few hundred dollars. It's wild out there & if you don't know what you are looking for you could lose money.
@Kenny_F91
@Kenny_F91 2 жыл бұрын
@@ItsAGunpla When did gunpla get so lawless? I had no idea it was so full of con artists. Plastic crack, indeed.
@DareBizarre
@DareBizarre 2 жыл бұрын
Awesome work! Have you built any Mechanicore kits?
@wolfvermilion
@wolfvermilion 2 жыл бұрын
Top job , comment for the reach
@michaels0ft
@michaels0ft 2 жыл бұрын
Awesome review. I don’t feel so bad that I bought the nu gundam version of this kit anymore lol
@munchkinmodelingman72GAM2
@munchkinmodelingman72GAM2 2 жыл бұрын
beautiful job on this hi nu gundam .
@RaggenZ
@RaggenZ 2 жыл бұрын
My man is full of motivation took you 6 months is truly impressive
@olo398
@olo398 2 жыл бұрын
did you try the cantonese pre cut masking tape for this kit?
@iqbalprasadana5208
@iqbalprasadana5208 2 жыл бұрын
Glad you found balance after watching the new american generation from tik tok
@victorruiz7862
@victorruiz7862 2 жыл бұрын
I didn't Even get a notification god dammit KZbin
@sentientnpc0
@sentientnpc0 2 жыл бұрын
Okay a quick question if you're reading this, if you ever made a mistake and painted a figure with darker color (let say dark green) but later realized that a lighter color is better (like pale blue), what do you do? Scrap the already painted green color then paint the new blue one or do you wait for the green to dry completely and then paint the blue one on top of it.
@ItsAGunpla
@ItsAGunpla 2 жыл бұрын
when an air brush more often than not you can get away with a lazy paint over, with hand brush painting you COULD get away with a lazy paint over, but then you'd have some thick layers. if you want it to do it right strip it down. Normal I just paint over if I am hand painting screw it, I have limited time in the day. If it's a project i care about, I strip down and paint again.
@sentientnpc0
@sentientnpc0 2 жыл бұрын
@@ItsAGunpla i see, thanks for the reply.
@PEPXI_gkworks
@PEPXI_gkworks 2 жыл бұрын
GO FOR SILVEROAKS HI NU NEXT
@GunplaNewbie
@GunplaNewbie 2 жыл бұрын
Not for newbie? I'll be glad steeping away from this kit. Took you 6 months? Not gonna spend 6 years on my end to do this lol. Jokes aside, it looks awesome. The amount of details and separations are unreal. Can't imagine the amount of masking it took to achieve this level of separation. Great work bud!
@sinanjuchar1274
@sinanjuchar1274 2 жыл бұрын
where do get the metal parts for this kit? i got this kit too but did not came with the metal parts :(
@deathsnitemaresinfullust2269
@deathsnitemaresinfullust2269 2 жыл бұрын
Wait, there's a business model built around putting together model kits for other people? i know the work would be tedious, but i could literally do that sort of shit All Day Every Day if i were making enough money to live doing it. Also, does anyone find it kinda surprising that there are people that would pay another person something like $4K to put together their model kit? Part of owning the model is to show how much skill you possess by being able to put it together and have it look amazing, now you can just pay a complete stranger to do it and then let you take credit for it. So ultimately you're paying for the "privilege" to lie about how much skill and patience you possess to everyone you know.🤷‍♂️ Whatever, if that's what somebody wants to pay for i'm certainly not going to stop it 😄👍
@FanfromVenezuela
@FanfromVenezuela 2 жыл бұрын
Savage
@TheCr0oked1
@TheCr0oked1 2 жыл бұрын
Excited for witch from mercury?
@zetaprime1688
@zetaprime1688 Жыл бұрын
The only plan for me who doesn't have money for conversion kits, I custom make my own cheap version of the conversion kit with a lot of pla plates
@fizz576
@fizz576 2 жыл бұрын
I personally try and stay far away from kits with big backpacks they look cool but I don't have the the talent nor the money to touch those.
@NotEthanWinters
@NotEthanWinters 2 жыл бұрын
Holy shit this almost looks 2d in some shots, i cannot put into words how amazing this looks.
@michaeldevondoskocz5925
@michaeldevondoskocz5925 2 жыл бұрын
Can you show us your city back round you where working ?
@masterkent1
@masterkent1 2 жыл бұрын
Now u gotta do the resin kit for the rg hi nu
@thedandy6765
@thedandy6765 2 жыл бұрын
what about studio G paint i hear lots of good things abut that and its widely available
@goji-0045
@goji-0045 2 жыл бұрын
He talked about it in the gunpla snobs podcast
@PixelLuffy
@PixelLuffy 2 жыл бұрын
cool
@WhiteWolfe101
@WhiteWolfe101 2 жыл бұрын
Hey Gundam what is the zippo fluid for?.... honest question
@Gunplahrazzi
@Gunplahrazzi 2 жыл бұрын
Zadddy
@IronMan-ds5bi
@IronMan-ds5bi Жыл бұрын
2:00 Agreed. Honestly, fuck Mr. Mark Softer. I haven't found a single paint or topcoat that _doesn't_ get melted by this stuff. Eventually threw it in the trash because i realised Mark setter is good enough for me.
@pspadotto
@pspadotto 2 жыл бұрын
Hey Gundam, do you follow Barbatos Rex on YT? The guy's channel is just testing paints and clears, etc. He has rooms full of kits but I've never seen him put one together. Anyway, he recently sprayed some clears, and has a ton of previous clear tests. You may get some additional ideas for what works over what from his videos.
@7BlackJack8
@7BlackJack8 4 ай бұрын
what paint you have used to flow so much eyes? I believe it's no a led, if i'm right there are some little detail on the body with same paint. Thanks!
@negathief
@negathief 2 жыл бұрын
Would you say this resin kit is alot harder compared to the YJL Sazabi or same difficulty?
@LandonKinzig-p9z
@LandonKinzig-p9z 2 ай бұрын
Stefanie Hill
@MelvilleOswald-n3y
@MelvilleOswald-n3y 2 ай бұрын
Jacobi Glens
@logunder4597
@logunder4597 2 жыл бұрын
What does it mean to be an “experienced builder”?
@후모후모-y3l
@후모후모-y3l 7 ай бұрын
진짜 멋지다
@ClaraGwendolyn-k1t
@ClaraGwendolyn-k1t 2 ай бұрын
Runte Throughway
@DeLEWD
@DeLEWD 2 жыл бұрын
brava
@Megatron_95
@Megatron_95 2 жыл бұрын
God I wish I could paint
@pickledblowfish6178
@pickledblowfish6178 2 жыл бұрын
Go paint bad, a lot. Then be less bad. I believe in you. Love, some guy who paints.
@ItsAGunpla
@ItsAGunpla 2 жыл бұрын
Just do it, like everything you get better.
@pickledblowfish6178
@pickledblowfish6178 2 жыл бұрын
Yeah, what he said. ^
@Prismpulse6
@Prismpulse6 Жыл бұрын
I want to build 🗡️🪽🕊️🌕🏎️🗡️🪽🕊️🌕🏎️
@calvin14888
@calvin14888 Жыл бұрын
Looks a lot of blemish I guess I'll put this kit to further back ....
@Gunplahrazzi
@Gunplahrazzi 2 жыл бұрын
I will build it for 2.5k$ holla at your boy
@GndmMkv
@GndmMkv 2 жыл бұрын
🥴
@Gunplahrazzi
@Gunplahrazzi 2 жыл бұрын
@@GndmMkv I won’t lol 😂
@browneye010
@browneye010 Жыл бұрын
Absolutely beautiful job Gundam.
ALL HAIL THE NU KING OF GUNPLA! |  RG Hi-Nu Gundam 4K Review
30:39
Mecha Gaikotsu
Рет қаралды 818 М.
Why no RONALDO?! 🤔⚽️
00:28
Celine Dept
Рет қаралды 114 МЛН
Tuna 🍣 ​⁠@patrickzeinali ​⁠@ChefRush
00:48
albert_cancook
Рет қаралды 103 МЛН
BAYGUYSTAN | 1 СЕРИЯ | bayGUYS
37:51
bayGUYS
Рет қаралды 559 М.
Turn Off the Vacum And Sit Back and Laugh 🤣
00:34
SKITSFUL
Рет қаралды 11 МЛН
H.L.M.S. - ν Gundam, Narrative Gundam, Hi-ν Gundam & more!
36:54
Zethythonix
Рет қаралды 178 М.
HI-v gundam YJ resin conversion Ep.4 상체
7:55
MOMO MODELING
Рет қаралды 20 М.
Can I make Titanium Damascus?
14:34
Alec Steele
Рет қаралды 3,4 МЛН
Every Gunpla Grade That YOU NEED TO KNOW Before Buying Your First!
29:43
Gaahleri Academy
Рет қаралды 58 М.
Is The MG Nu Gundam Ver. Ka Really That Good? - MONDAY NIGHT PREMIERES
25:41
HOW TO PAINT RESIN KIT - HI NU HEAD FROM SILVEROAKS
11:29
EA Gunpla
Рет қаралды 53 М.
Gundam Model Tips and Techniques From a Master Builder!
18:14
Adam Savage’s Tested
Рет қаралды 135 М.
Take my Money Bandai│ Gundam Narrative Stans Rise up!
11:36
ItsAGunpla
Рет қаралды 24 М.
ПРИШЛИ НА ЧУЖУЮ СВАДЬБУ, ЧТОБЫ... 🤣💵👰
0:42
А КТО ДРУЖИТ С МАТЕМАТИКОЙ?😂
1:00
СЕМЬЯ СТАРОВОЙТОВЫХ 💖 Starovoitov.family
Рет қаралды 6 МЛН
Угар 🤣 Аня Дима Тео #аняищук #димасблог
0:43
Аня Ищук и Димасблог фан канал
Рет қаралды 3,8 МЛН