iTWO costX® is the leading 2D and 3D takeoff and estimating solution. In Part 1, we’ll demonstrate how to measure from 2D drawings in iTWO costX®. For more video tutorials, please visit www.rib-international.com/en/c....
Пікірлер: 33
@rohitvitkar29593 жыл бұрын
Thank-you cleared my doubts
@lyndacormie524 Жыл бұрын
Do you have instructions on using the Trim [ ] function when measuring in line mode in any of your videos?
@RIBCostX Жыл бұрын
Hi Lynda, We don't cover this in the videos but you can find comprehensive information in the Help File in iTWO costX. Just click on the question mark in the top right hand side of the program and search for Trim. Hope this helps!
@ADLMStudio2 жыл бұрын
Hello, for the count, the windows are measured in point on my end so adding the lintel length seem difficult, how do we go about that
@RIBCostX2 жыл бұрын
Hi there, for lengths, if you measure it in point, then you can set up a custom quantity to calculate the lintel length/overhang with an allowance of say 300mm on each side, etc. Hope this helps!
@user-pw1cv5ej4x6 ай бұрын
How can I get trial version?
@dwiagus88ds Жыл бұрын
Hello sir, i have a question, for the room name , is it automatically made by the program or manual ? Thank you
@RIBCostX Жыл бұрын
Hi Dwi, for 2D takeoff the dimensions groups are created and named by the user. Hope this helps!
@gauravjain1653 Жыл бұрын
I have bought the Cost X 7.0 Student Version....working on it.......suggest to make the video more simpler...no doubt its great!!!!
@trasero10005 ай бұрын
How much did it cost?
@rohankarche202 жыл бұрын
Hello can you help with copying all layers in one folder to a different folder
@RIBCostX2 жыл бұрын
Hi Rohan, thank you for your message. Assuming you are referring to a list of Dimension Groups, then you can multi-select the Dimension Groups (using the Ctrl or Shift keys, when selecting them), then Right Click and select 'Change Folder...'. A dialogue appears allowing you to choose which folder you'd like to move the selected Dimension Groups to. Hope this helps!
@nurulsyafiqahzakariah53893 жыл бұрын
What is the difference between iTWO costX and Exactal Cost X?
@RIBCostX3 жыл бұрын
Hi Nurul, there is no difference between the two, just updated branding from Exactal to RIB Software while CostX is now known as iTWO costX. It is still the same world-leading program.
@junaidakbar80652 жыл бұрын
Sir Can We just Download this software for our learning purpose??
@RIBCostX2 жыл бұрын
Hi Junaid, you can purchase iTWO costX through your local sales representative. Visit www.itwocostx.com/contact/
@bukhchuluuntumurbaatar21533 жыл бұрын
hello Where can i download Exercise File?
@RIBCostX3 жыл бұрын
Hi Bukhchuluun, thanks for your message. You may be interested in our training website, which you will have more details and be able to download the Exercise File. Thank you! training.itwocostx.com/
@sebastianfasano2400 Жыл бұрын
How come when I enable Labels it shows the name instead of the area?
@RIBCostX Жыл бұрын
Hi Sebastian, you need to change your options to display Quantity and Unit as opposed to the current setting which is Dimension Name. Click File > Options, select the Drawings tab and scroll to the Dimensions section. Use the drop-down arrow to select Quantity and Unit against the Dimension Labels field.
@dileepravindu2545 Жыл бұрын
How can I get this drawing for Learning? So please proved the link for download
@RIBCostX Жыл бұрын
Hi Dileep, If you register for our online training course you can receive the drawings as part of the training files. It is also helpful for better learning the program. training.itwocostx.com/ Hope this helps!
@eamonbirhire41065 ай бұрын
is there a GPT version of this?
@stanceworks79956 ай бұрын
Can you build an assembly on costx? How
@RIBCostX6 ай бұрын
Hi! It depends what type of assembly your are referring to - an assembly dimension group or a rate assembly. We have some additional videos that can help provide information on both! For dimension group assemblies you can refer to the webinar on Adding & Editing a dimension group, and for rate assemblies you can refer to the webinar on composite/assembly rates. Hope this helps!
@alexthetic Жыл бұрын
Why cant I print all drawings that have measurements in one report???
@RIBCostX10 ай бұрын
We don't currently have this feature available but feel free to contact our support team to raise it as a feature request! www.itwocostx.com/support/
@user-dq7pw8mv7s6 ай бұрын
Can you please share the supporting files for practice? At least supporting files should be free.
@RIBCostX6 ай бұрын
Hi! Some sample files are included with your CostX download and clients can also download additional sample files through TechWeb (techweb.rib-international.com/) Further sample files are provided when purchasing CostX training including some of the files used in this video. Hope this helps!
@tausifkhan98697 ай бұрын
Where can i learn this software in india
@RIBCostX7 ай бұрын
Hi! Please contact our team in India on sales.seaj@rib-software.com for more information. Hope this helps!
@amilawimalaweera12337 ай бұрын
How to downloard software
@RIBCostX7 ай бұрын
Hi! Please contact our sales team here for more information on how to get started with CostX: www.itwocostx.com/contact/ Thanks!