９極の耐９ in 筑波サーキッ [99"分"チャレンジ] Tsukuba 2024 99 minutes challenge

English follows:
(unfortunately,the last lap wasn't recorded 😞)
これは私の2回目の筑波サーキットレースでした。去年は9位を予定していました。だから、改善へのモチベーションは高かったです。レース中、すべてを正しく行いましたが、残り1周のタイミングが分からなかったのが残念でした。完璧なコンディションで、優勝に向けての素晴らしいスプリントができたかもしれませんが、少なくとも2位は確実でした。最終ラップだと知らずにゴールをクルーズして、結局5位でした。それでも、この種のレースではポディウムに立てたことは事実です。戦略が実を結び、昨年よりも平均速度が2km/h遅くても、私はこのレースを非常に成功したものとして振り返っています。ペロトンの中で隠れて引っ張らないようにしていました。ある時点でペロトンが伸びてきたので、前に進むことを決めました。それは私がもっと引っ張らなければならなかったことを意味していましたが、非常に短く引っ張り、いくつかの引っ張りをスキップしました。とにかく、この方法で正しいタイミングで前に飛び出すことができました。すべてが完璧に機能しました。たくさんのエネルギーを節約しました。しかし、その後...何故かレース主催者が最終ラップであることを明確にしなかったため、スプリントはありませんでした。とてもイライラしました。ゴールラインを越えると、非常に怒りました。これは勝利になり得たはずです。とにかく、改善は明らかです。次のレースを楽しみにしています。
This was my second Tsukuba circuit race. Last year I planned 9th. So, my motivation for improvement, perhaps even the podium, was high. During the race I did everything right but unfortunately I didn't know when I was in the last lap. I had perfect legs and would have had a great sprint perhaps for victory but certainly for second place. Not knowing it was the final lap I cruised over the finish but still made 5th place. Still podium as a matter of fact for this kind of race. Considering that my strategy came to fruition and also that I improved by 4 places with an average speed 2km/h slower than last year, I still see it, in retrospect, as a very successful race. I was hiding a lot in the bunch and didn't pull too much. At some point the peloton stretched out and I made the decision to move up. That meant I had to pull more but I kept it very short and also skipped some pulls. Anyway, this way I was at the right place at the right time when the front jumped away. Everything worked out perfectly. I saved a lot of energy. But then...no sprint because for some reason the race organizer didn't make it clear that we were in the final lap. So annoying. Crossing the line I was extremely angry. This could have been a victory. Anyway, the improvement is obvious. I am looking forward to the next race.
Let me know in the comments section what you think and give it thumbs up.
If not, please let me know as well and why.
See you next time.
Stay safe, stay strong.
Get on your bike and be AWESOME !!!
PLEASE LIKE & SHARE
#MyPrefrontalRides #富士山 #roadbike
davisphinneyfo...
Where you can find me:
▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬
Twitter: / myprefrontal
Instagram: / myprefrontal
Strava: / strava
Facebook: / myprefrontalcortex
▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬
My bike:
Canyon Aeroad CFR Disc
Frame
Canyon Factory Racing R065 aero carbon frame, featuring ultra-rare Toray M40X carbon fibres. Fully internal routing, 12x142 mm through axle, flat-mount disc standard.
Axle dimension: 12x142 mm
Tyre Clearance: 31 mm
Material: Carbon (CF)
Weight: 995 g
Fork
Canyon FK0060 CF Disc
Fork with aero design shaped using advanced CFD technology. Disc flat-mount disc standard. Axle dimension: 12x100 mm
Fork steer tube diameter: 1 1/8"
Tyre Clearance: 31 mm
Material: Carbon (CF)
Weight: 430 g
Drivetrain
Rear Derailleur
Shimano Dura-Ace Di2 R9250, 12-speed
Cage length: long
Weight: 215 g
Front Derailleur
Shimano Dura-Ace Di2 R9250
Weight: 96 g
Cassette
Shimano Dura-Ace R9200, 12-speed, 11-30
Number of sprockets: 12
Range: 11-30
Crank
Rotor ALDHU24 Inspider Aero
Number of chainrings: 2
Bottom bracket
Shimano Pressfit BB92
Bottom bracket standard: PF 86,5
Weight: 200 g
Chain
Shimano CN-M9100 12s
Brakes
Shimano Flat Mount Adapter +20mm
Shift-/ Brake Lever
Shimano Dura-Ace Di2 R9270, 12-speed
Number of pistons: 2
Shift-/ Brake Lever
Shimano Dura-Ace Di2 R9270, 12-speed
Number of pistons: 2
Brake Rotor
Shimano XTR RT-MT900
Size: 160 mm
Weight: 171 g
Wheels
front
DT Swiss ARC 1100 Dicut
Axle dimension: 12x100 mm
Rotor mount: Center Lock
Rim height: 62 mm
Rim material: Carbon
Weight: 776 g
rear
DT Swiss ARC 1100 Dicut
Axle dimension: 12x142 mm
Rotor mount: Center Lock
Rim height: 62 mm
Rim material: Carbon
Weight: 900 g
Tyre front
Schwalbe Pro One, 25mm
Width: 25mm
Weight: 235 g
Tyre rear
Schwalbe Pro One, 28mm
Width: 28mm
Weight: 250 g
Thru Axle
DT Swiss through axle with Lever
Axle dimension: 12x100 mm
Thru Axle
DT Swiss through axle w/o Lever
Axle dimension: 12x142 mm
Cockpit
Canyon CP0018 Aerocockpit
One piece aero carbon cockpit with easy width adjustment, no-cut height adjustment, full cable integration, and reinforced carbon walls for added stiffness and improved durability.
Material: Carbon (CF)
Weight: 282 g
Handlebar Tape
Canyon Ergospeed Gel
Grippy, durable bar tape with a premium, high-quality, comfortable feel.
Color: Black
Seat
Saddle
Selle Italia SLR Boost Superflow Kit Carbonio
Gender: Unisex
Weight: 96 g
Seatpost
Canyon SP0079 Aero Seatpost
Material: Carbon (CF)
Bottle cage/bottle:
Elite Crono CX Kit
Bike computer:
#wahoofitness #Garmin Edge 1030 Plus
Camera:
#goprohero11