UNLIMITED MONEY For GT7 UPDATE 1.32 - Gran Turismo 7 Credit Trick

[@creatingwithcode1630]

Once again you have come through. I hope you understand how much this adds to my quality of life. Less grinding... more time with the kids. It's nice being able to focus on online racing. ~Chefs kiss~

[@SillyLlamaz]

Thank You for your kind words AND support! 🥰🥰

[@SillyLlamaz]

New script now uploaded too. If it starts giving problems! (Mine kinda broke down 1 day ago, and has not worked... but new does)

[@creatingwithcode1630]

@@SillyLlamaz 🫶

[@ramses1642]

Hi Silly, always thank you. In my case I began to see that it no longer gave me clean runs, consequently no more extra bonus. It seems that the randomness of the AI hindered the races after this update 1.35. I decided to change the script and put it to the test; Tomahawk CLEAN RACE TIGHT 1.32. Since then it has been running without interruptions for 36 hours and with clean runs in 95% of them. I don't know why this is. It had not been used for a long time since the scrpit "slow 1.1, the best" was much more stable. I say, I don't know why, but now Tomahawk CLEAN RACE TIGHT 1.32 works well, smooth and fast. Very grateful for your work SillyLlamaz.

[@BillAshtonNelo]

Do you have a link to clean race 1.32?

[@SillyLlamaz]

IMPORTANT UPDATE! 1. New slower script added. Named "Tomahawk CLEAN RACE SLOW 1.1" - This is more stable, has more inputs! If you find it difficult to run previous one. Try this instead! (Constantly updating) www.dropbox.com/s/2chmolluh577gh2/Tomahawk%20CLEAN%20RACE%20SLOW%201.1.xml?dl=0 (THE BEST) 2. Make sure your car has AT (automatic transmission) 3. Make sure R2 in the Accelerator! 4. If your laptimes are in between 42-49 seconds. You are good. Script has about 25 seconds of extra time now. 5. To get times correct, change tires to soft. 6. Make sure Your PC is doing this and only this! If you play with other apps on surf the web at that same time, you might mess up input the signals. 7. Make sure Your game is on Easy difficulty setting! 8. Set Your assist settings to Expert REMINDER: Works with PS4 controller ONLY!

[@tonyle4307]

Comfort: Soft? Or sport soft or racing (tires)

[@SillyLlamaz]

@@tonyle4307 it seems everyone gets different results. Choose the ones that give you the faster total race time 😊

[@tonyle4307]

@@SillyLlamaz and do you know why my Tomahawk turning left when the race start it randomly turn left sometime too

[@SillyLlamaz]

​@@tonyle4307 do you have assists enabled?

[@baractiberius6100]

I have followed all the steps above, winning the races, all good. The problem is the restart, the cursor drifts either to the right of the screen and is unable to restart the race or simply enters the Japanese clubman cup 550. Ps4 controller. Any thoughts on this?

[@MrEddyJS]

Thank you so much for this! It has been running consistently for about 90 minutes now. No problems so far. Lap times are: 47 seconds, 44 seconds, then 42 seconds until the end of the race.

[@stublazinsky5690]

It's broken again... It seems to stop every 30-40 minutes on 1.35

[@twist232]

I was having that yesterday. Today I get to the menu of the race and it won’t start the race. The cursor ends up just going right as the race controls start before selecting start race.

[@MichaelKrause-b5k]

I cant get it to work, when i go to run the clean race script it just does nothing. what am i doing wrong

[@lucaswestin744]

Can confirm that this still works on UPDATE 1.33. Have had it running for a handful of cycles by now! 😄

[@saneroner]

it still works but having to restart the cycle manually more than before.

[@alblasutig]

Thanks! Script was working great for weeks now. Then the update ruined everything. Your first script would not work for more than a hour or so. So I followed what you explained was the problem (the repeated exit screen on race 2) and made my own script. Now it seems to be working again. I’ve been running consistently for the last 3hours. Thank you so much. Keep up the good work and don’t stop!

[@SillyLlamaz]

Thank You soo much! The new script I made 2 days ago, stopped working yesterday. I just finished a new improved version, that has worked for 5 h now. Very happy with it. One of the best! :)

[@alblasutig]

@@SillyLlamaz All this extra work just makes me want to abandon GT and buy a pc. If a pc set didn’t require such a large investment I’d drop GT right now. Thank you for making the game more enjoyable despite the developer trying to make the game less fun. I’d actually be up for giving them $100 to just open the game up so I could just have infinite cash and just play how I want.

[@SillyLlamaz]

Yeah! Exactly 😀 I 100% agree. I really miss the GT2 and GT4 times when playing felt rewarding. Even if it was grinding on some level, it felt fun, and less like work. Now it's so obvious and grindy that I feel forced...and it's not even fun. PC has it's perks but I really hope for MGS remakes and so on. PS5 required then 😀🤣

[@erickb4046]

So the script won't start. - Tomahawk S - R2 accelerate, L2 brake - Lan connected between laptop and PS5 - PS4 controller (cheaper fake version) - All assists off - SLOW 1.1 - Remote play 5.5 - Followed the remaining instructions in the video (turned off record on touch, placed mouse/pointer on the first championship at the bottom) What am I missing? PS4 fake controller perhaps? It works on my PC still normally... What else could it be? Tks

[@SillyLlamaz]

Hey, original ps4 controller only! 😀 tested, proven! 😇🥰

[@erickb4046]

tried again with original PS4 controller and nothing... what could it be then? tks

[@ghastous]

@@erickb4046 it just doesnt work haha cos he needs to update it

[@agdamaster]

Doesn't seem to work - PS remote play disconnects after a couple minutes - tried multiple times. Did everything as told - downloaded stuff from description, followed instructions, installed everything, started the macro as per video instructions, R2 acc, stick controls, AT, lap times below 50sec, connected both PS5 & PC through LAN, connection is 200mbits. The only issue seems to be PS remote play (5.5v from your link) disconnecting after a few minutes. My laptop doesn't have a LAN port, so I'm using a USB adapter. And the connection itself is mobile (4G/5G) network received through router (LANs are connected to it). Could that be the issue?

[@SillyLlamaz]

Wow...you done everything correctly. I have no experience with usb lan adapter...can't say for sure...how long does it run?

[@agdamaster]

@@SillyLlamaz a few minutes, it's done 1-2 races most, sometimes not even one race gets finished

[@agdamaster]

@SillyLlamaz update: I restarted my PC and that seemed to do the trick? It seems to be running fine without major issues ever since. Thank you so much for making this!

[@ytdarsch84]

It doesn't work for me. Having done all the procedure, once I press play, on the ps remote, the symbol of the world with the yellow triangle appears at the top left and nothing happens. but if I play with the controller everything works perfectly, so i don`t think is a connection fault

[@maxhason4392]

i cannot install remote play v.5.5.0 anymore it said " this installation package could not be opened. contact the application vendor to verify that this is a valid Windows Installer package"

[@ddogwr83]

I have the same problem. Windows won´t allow me to install

[@maxhason4392]

@@ddogwr83 me too dude

[@SillyLlamaz]

Try this fix: reddit.com/r/remoteplay/s/reSvXQaXES

[@maxhason4392]

@@SillyLlamaz it doest work dude

[@Martin-uj6zn]

Hey, do you made a script for 1.33? Your 1.32 was working but only for a few cycles before messing up. Also looks like they change the AI and now the cars are getting in the way and messing up your clean race bonus more often than not. Cheers.

[@andreimelo135]

I also noticed that. AI is getting more in your way.

[@wilnardjtan]

when i press play it selects a different race track..specifically the WTC700 championship can anyone help?

[@vusshh]

the script run fine until the end, it double clicks leaving the first replay then instead of clicking the next race it clicks replay then restarts the macro and just scrolls around in the replay, someone please help i’ve been trying this method since his first video 😢

[@SillyLlamaz]

Do you nave your console connected with LAN cable? Or WiFi? Are you using a laptop or PC? 😊

[@vusshh]

@@SillyLlamaz yeah i believe the fact that my ps5 isn’t connected to lan is the main reason due to the remote play lagging

[@BillAshtonNelo]

@@SillyLlamaza laptop. Is there a difference in remote play between Pc and laptop?

[@j.ak.e]

not sure if you noticed this, but PD also added a second prompt for pressing "Start" prior to entering a race; i wasn't macroing when I found out and it could be mistaken for being a bug and they'd just ignore the reports 🤷

[@JasonVallance]

Hello, I’ve tried running script but it’s always out of sync. Using a ps4 controller with ps5. I tried to do my own script but it’s only manages one loop then goes out of sync

[@teamfranco8051]

I'm in the same boat. The script runs fine 2-3 loops then it buggs out.

[@SillyLlamaz]

Okey. It happenes. Usually caused due wifi signal. Do you use Wi-Fi or LAN cable? It also happenes, if PC is working overtime

[@JasonVallance]

@@SillyLlamaz I’m using Wi-Fi and I only have a windows surface pro. Not the most powerful machine 😞

[@SillyLlamaz]

@@JasonVallance is there a way to at least get the LAN cable in to test with that?

[@JasonVallance]

Stupid question alert 🚨. Do I plug both the ps5 and the pc into the main router?

[@TomCadonau3]

Good news. I got the controller to pair. However the script may not be working great on ps4. It always goes much further than the 6 slots over at the start. I also assume the loading times for my ps4 are much longer because the script started to race before the race began. Could I get help?

[@SillyLlamaz]

Yes, this is for ps5 only, but I made a video teaching how to record your own kzbin.info/www/bejne/kGaZZJ58d8x8jJY

[@TomCadonau3]

@@SillyLlamaz is there a different script I could use for the ps4?

[@andrewwerner7524]

So my marco reader is showing the marco is going, but nothing on screen is happening. My pp isnt the same as yours, and my marco imputs are way higher with a different name. I assume thats just cause its a different macro, but either way nothing happens in game. Any help here?

[@tes913]

Thank you for your wonderful attempt. I have followed the instructions in the video and successfully set up the PS4 Macro script. However, I am experiencing an issue where the car keeps colliding with the wall and remains in second gear, resulting in a lap time of around 1:04~1:06. Eventually, the car comes to a stop just before reaching the finish line of the last lap. *It appears that the car starts moving as if it has reached the finish line and transitioned to the next race. Are there any specific car setup, controller button configuration, or other special settings that are not mentioned in the video?

[@SillyLlamaz]

A lot more! Pinned comment for this 😀 seems like you drive with assists, and maybe even manual gearbox

[@tes913]

Thank you for your support! Thanks to that the macro works fine and is automated.

[@SillyLlamaz]

@@tes913 You are very welcome! i am happy to help :)

[@tes913]

I'm not sure which cycle it is, but it seems that the game has transitioned to a different tournament race, and the race in the American Championship event is not being resumed.

[@Inshallah42O]

I cannot get the script to go into the macro software. Every time I try to send it over, it just opens the folder. How do you open the files correctly? I've followed every step

[@raphaeltisserant6650]

Car doesnt complete the track and to get in the event my PS5 takes a little longer to load, so the macro doesnt go on. What exactly is the controller sensitivity? And Tires?

[@SillyLlamaz]

Still having an issue? Sorry for long answer 😊

[@SillyLlamaz]

AT, default settings, all assists off.

[@hyperionyt]

Any advice on how to use TeamViewer to manage this remotely? If the program goes off the rails I can see how to Re-start the macro, but how do you remotely control the game to get it back to the right screen for the macro to begin?

[@andreimelo135]

I use anydesk and Iphone. Works well.

[@XeNoN356]

I have done everything as in the video so that it works. But the problem is that too many inputs are pressed at once so that it does not fit together at all. It looks like several keys are pressed twice or three times on the macro and I wonder why? I use a PS4 controller like in the video. What could be the problem? Edit: Ok now it works without problems, just plugged the controller into another USB port on the PC, very strange. Thanks again for this cool tutorial! Other question, can it be that it sometimes does not work properly or for those who use an additional M2 SSD on the PS5 because of load times? Because sometimes it runs without problems and then the input is suddenly later completely elsewhere in the game and then it no longer runs. Do you have to play the GT7 on the M2 SSD of the console storage so that it matches again with the input?

[@SillyLlamaz]

That is a good question. I am running it on m2 ssd (2tb Samsung evo 980 pro) so not native PS5 ssd. The inputs are rather connected to network stability and speed. Glad it works for you as well! I am working on another script, stay tuned! 🥰🥰

[@andreimelo135]

Script runs very well but sometimes it glitches with the script. When this happens, instead of macro does one input, it does 3 or 4 inputs, messing with the timing. For example, instead of clinking ‘right’ once, it clicks 3 times. I have to restart computer to make ir normal again. What could it be?

[@stnleyb]

Getting this too. Going to try to reboot PC

[@stnleyb]

reboot did not work. Still getting triple inputs

[@bradwells9597]

@@stnleyb I changed the power cord to the ps4 controller and this fixed it for me

[@MegaGhost12]

The script doesn't run. But what i've noticed is that the PP from the car is different + the BHP. PP on my game is: 949.94 and the bhp: 1021 I think that is the reason why it isnt working for me. Can u fix that?

[@MP-bc1pm]

Doesn't work for me on 1.36. It seems like it doesn't shift up. You end the race in gear 2, position 15 on lap 5. An update for 1.36 would be greatly appreciated!

[@SillyLlamaz]

Second gear...hmmm it seems that you have assists still on, braking or/and gas too... hope not turn aids

[@MP-bc1pm]

Upon further inspection I've had TCS on level 2 and abs on. All other assists are off. But I've got it working by recording my own macro using your software. Thanks for the reply.

[@SillyLlamaz]

@@MP-bc1pm Perfect!!! 🥰🥰🥰🥰🥰

[@MaroSama888]

i have a problem with the script; i run it and it selects the cup, i wait for the loading and the cimematics of the track start after that there is no "X" input to go ahead to the race start menu and to start the race; i start the race manually arround 10000 instructions and then it races normally. has the same problem going to interlagos to retire from the championship. any suggestions?

[@SillyLlamaz]

Are you running it on PS5 with ps4 controller?

[@MaroSama888]

@@SillyLlamaz running it with PS4 controller but no problem I created my own script as I figured out it was my slow loading times. tks

[@phibetakafka]

The script won't start the Pan Am championship - it just flies over to the final World GT series completely bypassing the PanAm option. On a PS4 controller and everything else about the connection seems fine - any idea what's happening?

[@phibetakafka]

Nevermind - tried plugging my controller into a few different USB ports and it finally worked with one of them. Thanks!

[@SillyLlamaz]

Superb 🤣🤣 I love easy fixes

[@ghastous]

Doing same for me and switch into all my USBs and still same issue. Using PS4 controller and it just selects the last championship.

[@ghastous]

@@phibetakafka tried that didnt work

[@j.marston]

We need an updated video. For some reason the script just never plays when I pressed play.

[@SillyLlamaz]

It's coming! Working on it. I am trying to find a fool-proof setup! 😊

[@j.ak.e]

edit: solution is to remember to use a PS4 controller, doesn't work with PS5 controllers ‐‐‐ the macro doesn't run when Play is pressed, though in my case when it starts it just goes up to the top of the screen (where the yellow Cafe Menu Checklist icon is) and then sits there forever without doing anything (that's before it pauses yet again; i'm not sure if my USB or controller's faulty, but this didn't happen before)

[@SillyLlamaz]

Do the numbers in macros corner start running or they stay at 0?

[@j.ak.e]

@SillyLlamaz stays at 0, but when I move the USB around it manages to get a few hundred in and them stops; got as far as around 1100 once from staying completely still once I got to run from moving the USB, but the script itself has a length of 91780. there might be something blocking it that can be bypassed by doing something specific with your USB?

[@SillyLlamaz]

Do you have Original PS4 controller ?

[@j.ak.e]

@SillyLlamaz i realized that was the problem; it'd been a while since I macro'd so I forgot you don't use a PS5 controller, but I feel like what I experienced using a PS5 controller could be a clue towards a potential workaround

[@SPARKY23333333333433]

Grr. Downloaded everything and tried to run the script and it moved like 9 places to the right instead of 6. I re-tried using my PS5 controller thinking my PS4 one is wonky and now the script just doesn't play. The play button turns Green but nothing happens. Any thoughts?

[@phibetakafka]

Same thing happened to me - try plugging your PS4 controller into a different USB port. If it's on a crowded USB bus that might introduce some kind of latency that interferes with the macro.

[@SillyLlamaz]

Also play might not work if you open it before you open remote soft

[@michaelmorgan4225]

I've followed everything to the T, but when i start the script it goes 7 spots over to WTC600..help please!

[@SillyLlamaz]

Hmmmm. Every time? LAN connection? Wired ps4 controller?

[@michaelmorgan4225]

@@SillyLlamaz Yea, trying with a laptop over lan, gameplay is smooth..it just seems that the input from the directional pad is registering multiple times per press. I tested and recorded 1 right dpad button press and it moved 3 options over on the track select. **I am using wired PS4 Dualshock 4

[@SillyLlamaz]

Omg...so weird. I think a little

[@ironhand04]

For some reason, whenever I press on the Orange PS4Macro file, it just doesn’t open. I press run as administrator, but nothing happens, not sure what to do.

[@SillyLlamaz]

Hmm, quick question, macro soft itself doesn't open, or then script on macro?

[@ironhand04]

@@SillyLlamaz I believe it’s the software not opening. The little blue loading circle will show up, but after it finishes, the window does not pop up.

[@shawncassar8948]

by any chance can we get the script running with the latest version of ps remote play. trid everything but did not manage to install the 5.5 version. i gave up now tbh :((

[@SillyLlamaz]

Yooo! I fixed this problem 8 days ago! Check my last 3 videos! I will hook you up!😊

[@sr28]

Can I use my PS5 controller connected to PC or do I specifically need a PS4 controller?

[@ghastous]

Well ive done all the info required but when i try to lauch the PS4 macro it gives off a error that it cant connect. No idea how to fix but for me nah this dont work. Edit so i got it to work but unfortanly it doesnt select the correct race and trys to go into the WTC 700 instead

[@ghastous]

Anyone even going to reply? cos this dont work on 1.35

[@infinitesweg]

any specific assist settings? i have expert settings on with auto gearbox and the car is just riding the wall the whole time although i still win the race

[@SillyLlamaz]

Easy settings, all assists off, AT 😊

[@infinitesweg]

@@SillyLlamaz bet thanks

[@SillyLlamaz]

@@infinitesweg no problem 😇😊

[@bradwells9597]

Got a ps4 control, now the marco works (didn't work with the ps5 controller). The ps4 is plugger directly into my computer. Using a PS5 as the consol. I start in the High Speed Ring starting position. When the marco starts it jumps all the way to world GT series championship. What's going on there? It like skips a few championships at a time. Help please :)

[@SillyLlamaz]

Hey hey, all LAN connected? 😊

[@bradwells9597]

@@SillyLlamaz yes

[@SillyLlamaz]

@bRAD Wells wow...usually some signals get lost or doubled via WiFi...have you tried recording your own script yet? It's difficult to get my script working on all set-ups. You can try recoding your script using my guide kzbin.info/www/bejne/kGaZZJ58d8x8jJY

[@bradwells9597]

@@SillyLlamaz I'll try that tonight :)

[@SillyLlamaz]

@bRAD Wells let me know, let's get it fixed 😊

[@jcpr01]

Unfortunately, can’t make the macro run. I restarted the PC a few times, I can see the Macro software is connected to the PS Remote Play, as it has the option to resize PS RP window and it works, but when I press play on the macro, it doesn’t start the macro. It keeps saying 0 in the current step. Tried in 2 different PCs. The only thing is I don’t have a PS4 Controller, just a PS5 Controller. But from the video, I think PS5 controller also works, but it’s more sensitive. Any ideas anyone?

[@SillyLlamaz]

Sadly with PS5 controller, macro does not start. It doesn't recognize it as a controller

[@raphaeltisserant6650]

@@SillyLlamaz PS5 controller doesnt work in any script? Is there a different script for a different car and track that works with ps5 controller?

[@SillyLlamaz]

PS5 controller is blocked by Polyphony, sadly 😀

[@jcpr01]

@@SillyLlamaz I used the -Emulate controller option, but the script isn’t ready for that. I’m going to give it a try with the C# scripting option, instead of macro controller recording, over the weekend. I’ll let you know the results.

[@SillyLlamaz]

Wow, yes let me know! Coding will surely make it foolproof 😀

[@GeezMo76]

Script works for me about 5-7 times in a row and then it seems like the timing gets off and selects another race. I’ve let it run and then check on it an hour later and it’s on WTC600or in a menu trying to select something it can’t. Any ideas?

[@SillyLlamaz]

Hmmmm, same thing happenes to me also, not often but randomly 2-3 times a day. I have LAN connection. The issue is the connection between Remote soft/PC and PS5. Lower PC resolution, lower the amount of CPU usage, make sure Everything is cable connected, to minimise the errors. No 100% guarantee still 😀

[@GeezMo76]

I switched over to a Ethernet cable directly plugged into one of my Orbi Satellites and it seems to have fixed the issue. Been running for over an hour with no issues now. And I’m running it on a not so great laptop but it’s the only process running. So thanks for the recommendation.

[@SillyLlamaz]

@GeezMo76 sweeet! 1 hour is allready very very very good! It's one hour of life saved! 🥰🥰🥰 let me know how long does it run without any hiccups. After Daily ticket you need to re-activate! 😇

[@kinse4514]

i need to do diy macro.;(, my car touchinnf the back of another car at start. cant get a clean.. so to do this, just so a normal diy macro like before? but make twice O X X in 2nd race? thank you

[@SillyLlamaz]

Yup, O X ,X even 3 times. BUT when restart screen, also press left, O, left left O left left X, very useful

[@andreimelo135]

for example, if you start the script at 11pm, after midnight will the script be interrupted by the daily workout prize?

[@rapperlachen5682]

I don’t understand. If I open the macro link it shows me like 20 different files with various timeframes and names.

[@SillyLlamaz]

Try the other link. Github version. It should ba a zip file. You unpack into a folder

[@jonisainio6041]

I was looking forward to test this, but I can't get the remote play working with my PS5. Yes, I have enabled remote play and I'm in the same wifi with my PS5 and computer, but doesn't work. Weird. Also I'm little confused since in the video you show two different race, I think your new script is for the championship race?

[@SillyLlamaz]

Pan America is the correct race and the starting position is the same 😊 Hope you get your your remote connected

[@jonisainio6041]

@@SillyLlamaz I actually did, problem was the internet connection. Just finished third race, everything looks working fine! I just calculated that this will make me 4.2M credits during my workday... You are true hero sir!

[@SillyLlamaz]

Wow! Very nice! Gratz and enjoy! 🥰🥰

[@sanvei]

@@jonisainio6041 p

[@cemento1941]

* * * SIDE NOTE * * * The controller setup must be on L2 & R2 for gas and brake. I learn it the hard way

[@JLaskles]

And automatic =)

[@ابوزهرة702-ن7ب]

I do started the script and it went good for 3 runs but after it its start to do wrong things and not work and I stopped it and start it again but still same problem soo what the problem ? And what can i do (sorry if there some mistakes in my comment) please help me

[@shawncassar8948]

hey :) yesterday i finally managed to install the remote version 4 or something and it worked !! but then i did windows update and when you start the script it seems to be stuck on zero or starts very slowly. maybe a format wil do?

[@SillyLlamaz]

Do you have all assists turned off? And R2 as accelerator?

[@MrEddyJS]

Oddly enough I had a lot of problems with consistency on the last patch (1.33), now with patch 1.34 the script is running smoothly. Need to restart it once for the daily ticket, after that it runs without any issues. Thanks again for providing the script and showing us how to record one of our own!

[@SillyLlamaz]

I'm happy to help. Thanks for the comment! 😊😊🥰

[@paulbrooks8068]

Hi there - I have everything set up and downloaded the new tomahawk "slow" script. However, after connecting to the game, and using the remote to buy the correct car, and then going to the correct champtionship, I leave the cursor where you told me. Then, when I run the script, it starts to run within the program itself, but it doesn't control the controller...and therefore doesn't visibly do anything with the game running in the background.

[@SillyLlamaz]

Are the script numbers rolling? Do you have ps4 controller connection and control before starting the script?

[@paulbrooks8068]

Yes to both. Actually, it seems that I needed to run an older version of the Remote PlayStation program and REJECT the update. I access it locally so it all worked perfectly! All was working great except once per hour something screws up. I haven’t seen where the break happens but at some point it gets stuck on a screen with QR codes…I redo the steps and all works perfectly…for about an hour.

[@paulbrooks8068]

One thing I noticed is that my scripts are out of 99838, not 100097. I downloaded the one from the link you provided. Maybe that's the problem?

[@JLaskles]

@@paulbrooks8068 Yes same issue - have you managed to get it working>

[@paulbrooks8068]

It seemed to work for about 3 hours, then whenever I would go back to it I’d see a bunch of QR codes. Still…three hours of auto grinding was nice. Let’s see if 1.33 screws it up.

[@scampinaround]

Can you remind me what your assist settings are for this? I have automatic transmission, but every other assist is turned off. Should I turn any others on?

[@JordanWallac3]

I'm having an issue with the PS4 controller where it says I cannot play PS5 games with the Dualshock 4. Is there any fix for this script? I had a quick look but can't find the answer.

[@SillyLlamaz]

What version of remote play are you running?

[@JordanWallac3]

@@SillyLlamaz 5.5 as in the video description.

[@SillyLlamaz]

@@JordanWallac3 damn

[@alain-alexandredeparis5298]

Make sure you sync the copntroler to the PC over bluetooth (SHARE+PS till it blink white rapidly, then add bluetooth device on PC), if you dont, the controler link to the PS5 instead when you press PS button (blue light steady) and cant be used in GT7, giving that warning.

[@martinkompas]

First, this is awesome, you are awesome! Thank you for this! Two things: There is a new random pop-up that no one seems to have discussed. It shows up in the pre-race menu, and informs you about PP. Popped up twice for me in the last 20 hours. And a little tip. The PS4 script software didn’t like me using the Dualsense controller. I downloaded reWASD, and emulated a Dualshock4 controller. Works great!

[@SillyLlamaz]

Wow! Thanks for this.... I will try it 😀😀Sounds really interesting

[@martinkompas]

@@SillyLlamaz forgive me, it’s “reWASD” and not “reWARD” (edited above). Also be sure to use the “PS4 Remote Play” feature/config.

[@RoadRunnezzz]

Any ways to install 5.5.0 versio? I got some error about installaation package, but tested that 6.0 installs fine but then macro wont work

[@SillyLlamaz]

Yes, with 6, you can't use macro. What error does 5.5.0 give? You are opening it as administrator, right? There is a chance you can't install 5.5 after you have installed 6. You need to uninstall and clear all of the 6 remains. Use disc cleanup too for registry key's

[@andreadevitofrancesco3194]

When I try to connect my PS4 pad to remote play, I select controller profile and lost connection with PS5. How can I fix this issue? Thanks

[@SillyLlamaz]

Ps4 controller takes over as soon as you connect remote soft. That is supposed to happen

[@andreadevitofrancesco3194]

@@SillyLlamaz when I start MacroPs4 script, numbers doesn’t score forward

[@RandyTimmermans]

I tried your script but it seems to fail. It starts the race but when the car rolls it just stops on the middle of the track. Any ideas?

[@SillyLlamaz]

R2 is accelerator right? Not x 😀

[@RandyTimmermans]

@@SillyLlamaz Mmmm you might be right. I'm not using the default controller settings so that explains, didn't think about that 👍

[@SillyLlamaz]

@RandyTimmermans all default 😊 no assists, otherwise you always lose 😀

[@RandyTimmermans]

@@SillyLlamaz Maybe it's update 1.40 that screwed things up but it is still not working as expected. It seems the Tomahawk doesn't accelerate when race is started did i skipped some controller or assist settings or is it indeed version 1.40 ?

[@SillyLlamaz]

@RandyTimmermans turn all assists off, you might have breaking and/or steering aids on

[@roshi61704]

PS4macro software didn't work when i tried it because it refused to hook into the remote play software. recording and playing macros doesn't do anything. then there is the fact the remote play app constantly asks me to update and when i press no i have to re-pair it to my PS4. absolutely annoying.

[@SillyLlamaz]

:O damn...you try on ps4? Ot sadly works on ps5 only, the script that is. But remote should connect vide link-code, under.link device. Make sure, they are in the same LAN network! 😊

[@roshi61704]

@@SillyLlamaz My PS4/PC are under LAN cable so that's not the issue. Not sure why I am forced to re-pair via linking code every time

[@roshi61704]

@@SillyLlamaz Also I understood that the script is for PS5 only. I simply wanted to record my own script but it just wouldn't work at all.

[@SillyLlamaz]

@Roshi617 (GMD Gamer) weird situation. Usually getting remote connected isn't a big hurdle. I have had troubles. But restart PC and Console, enable remote play, and it usually works flawlessly.

[@roshi61704]

@@SillyLlamaz Ok so I got PS4macro software working however it is quite inaccurate and it kept making my car crash on playback. I recorded Blue Moon Bay Speedway FR Challenge with the Corvette C6. Not sure what was wrong Also the PS remote play software still won't stay paired no matter what I do. Guess I will have to live with typing in the pairing code EVERY time.

[@ryanmckane]

Remote Play forces me to update to a newer version, so i cant connect with the 5.5 Version. Anyone else having this issue?

[@SillyLlamaz]

It should not FORCE, local play works perfectly

[@ryanmckane]

@@SillyLlamaz you're right. I just had to connect my PS5 with the Code from the settings. After that, Connection works with Version 5.5. Thanks man, grinding while taking care of the kid. You are a hero for people with limited time!

[@SillyLlamaz]

@ryanmckane wow, thank You man! I am happy to help 😊 Take care and all the best to you and your family! 🥰

[@ducted]

Thank you very much! I tried your method and did my own script. It's fantastic! Sometimes I get 50+K and sometimes the clean race bonus gone and get less. Anyway, I'll try to run for 24h continuously and see what happens. Cheers!

[@VictorCruz-td6tm]

Anybody ever figure out why or how to stop the extra inputs?? It also messes up at the replay option after the race... I can get it to stop and run a little while but then it get right back to extra inputs or whatever happens at replay...

[@moltonboron]

I've noticed if I stop the script after the Daily Reward and then restart it runs perfectly for hours.

[@SillyLlamaz]

Yes....because of updates. New guides up now

[@lukamaloca9628]

I did everything correctly and the script works perfectly. But it only works for about 2 hours. So after those 2 hours pass my cursor in gt7 gets lost on the screen and the script cant start the new race. I really dont know whats going on. Please help me.

[@SillyLlamaz]

WiFi gets poor signal or PC usage goes higher

[@lukamaloca9628]

@@SillyLlamaz I have both my PC and PS5 connected with a cable to my router. So my internet is 100% not an issue. But I cant be sure about the PC usage. Its a little suspicious that the script always fails at the same time.

[@SillyLlamaz]

@lukamaloca9628 hmm, always after 2 h...that is weird...well at least it works 2 hours 😀😀

[@waneguene2738]

What is thé tires used ? and What is thé seting of abs and driving help ? Sorry if you dont understand me, im french and i have a verry bad english😅😅😅

[@waneguene2738]

your car have 862pp and mine 886pp i dont understand why

[@SillyLlamaz]

@@waneguene2738 because of my oil. Check pinned comment 😊 all is there

[@waneguene2738]

Ho my god i’m a big noob 🤦🏻‍♂️🤦🏻‍♂️🤦🏻‍♂️ thanks man!!!

[@SillyLlamaz]

No problem man 🤣🤣😀 Hope you get it running well 🥰🥰

[@user-pr1vi7lk8x]

I'm so bummed I havent been able to get the script working. No matter what I do the script always skips past the panamerica race to the final championship. The only thing I can think of is that I'm on laptop but its a higher end gaming one that's connected via ethernet same with the ps5. Is using a desktop required If so does it need to be fast? I was thinking of picking up a cheap used desktop to see if it works.

[@SillyLlamaz]

It needs to be a bit above average....yourself otherwise you lose some inputs. I really reccomend you to test it with another pc before. Ps4 controller right?

[@user-pr1vi7lk8x]

Yep ps4 controller tried all of my laptops usb ports too and made custom scripts they work in the race but I can never get it to start the the race

[@ramses1642]

I can assure that the script still works with this new update 1.34. Since I collected the ticket at midnight, I left and escript running and even being the update in between, the script has carried out 3000km and I have only had to start three times the macro. Once because of the update and other twobecause it collided with another rival and stayed out of its trajectory. (It´s still working rigth now) I recognize that the script does not always work quite well, but it is due to the randomness of the game's AI and others details. I think... Thank´s Silly for your work.

[@SillyLlamaz]

Thank you as well Ram Ses 😊😊

[@shawncassar8948]

hey Silly :) where there any changes after todays update? just asking as i can only check later in the evening

[@SillyLlamaz]

Nope, seemes to be working still 😀

[@shawncassar8948]

youre the best

[@GeezMo76]

Seems something has changed again is there a newer script? It was working and now only runs one time. And why two different macros in the google drive download. Running all the things you’ve recommended.

[@SillyLlamaz]

Slow 1.1 should be working. I can update the situation in 4 hours

[@shawncassar8948]

had some issues and needed to install the ps remote play again but it is not allowing me to install the version 5.5 :(

[@SillyLlamaz]

Fixed! 😊 New guids up

[@twist232]

First off thank you for doing this. It has saved me time and frustration and allowed me to actually just enjoy the game. However I am starting to have issues with 1.35. It still works but I am having to reset it after it starts the Daytona race every half hour or so. Zero idea what’s going on just what has happened.

[@Nukleonaudio]

same!!

[@BillAshtonNelo]

Same

[@ericfinesilver6682]

Everything work’s great until the race start. My car just wants to go to the left into the wall. What settings should I have the controller set at? Thanks

[@SillyLlamaz]

All settings in pinned comment. R2 acceleration, and analogs as steering, AT

[@erickb4046]

does it only work with this model of Tomahawk or could it be the Tomahawk X VGT? tks

[@SillyLlamaz]

Only the one model. Street-model 😊😊

[@alfredlille]

My steering keeps veering to the wall and basically drives along the wall for the whole race. Any ideas?

[@SillyLlamaz]

To the right wall? Do you win? What is the clearest way to avoid traffic to you? 🤣

[@Kudos22]

i find when the race ends it goes to the race search menu and then gets stuck on the incorrect championship and i have to manually reset the position each time

[@SillyLlamaz]

Wich script are you running?

[@Kudos22]

@@SillyLlamaz i apologize. I got it working, i mistakenly had a cafe championship in progress that i had to complete. script in the description has been working great. Thanks!

[@SillyLlamaz]

@@Kudos22 sweeeet! 🥰🥰🥰

[@andreimelo135]

I do have a PS4 controller but it has drift on the left analog stick sometimes. Will it work?

[@SillyLlamaz]

Depends on the amount 😋 it should work, but of it happenes in the menu...then risky 😬

[@julienlafaye6726]

Great job! You didn't record macro for the gold licence?

[@SillyLlamaz]

I wish I did! 😀

[@Theonlyaverageviewer]

i know this is a little after the release of the video but i purchased both the tomohawk and set everything up. when running the script it auto scrolls to the final championship and not the pan american championship. i think i am doing everything right but maybe i am not?

[@SillyLlamaz]

Cable connected Internet should work. T seems like a WiFi error

[@GT7god]

I’m having the same issue. Did you get it resolved?

[@Theonlyaverageviewer]

@@GT7god no, sorry bro. When I get time I might try and record my own script

[@SillyLlamaz]

Damn....yeah, hard to make all in one solution. DIY might me your way to go

[@GT7god]

@@Theonlyaverageviewer are there any videos in how to record a script?

[@jackinbe1000]

1.33 here having issues, is it meant to sit and wait till around 85000 cycles before leaving the results leaderboard?

[@SillyLlamaz]

No, 1 cycle should Last about 4 min 50 sec. It should exit and restart. Where does this get stuck? Do you finish first?

[@jackinbe1000]

@@SillyLlamaz sorry I was mistaken, it sits on the results board from about 20,000 to 80,000 then quits. But the issue I'm having now is it quits but then opens the USA world map and the scripts ends with a race selected so it then ends up in the race shop

[@jackinbe1000]

@@SillyLlamaz oddly enough I was running it this morning and it was working fine. Now it isn't

[@SillyLlamaz]

Yeah, it's totally out sync. The result board should take about 20 seconds

[@jackinbe1000]

@@SillyLlamaz it starts fine, and completed each lap in about 43 seconds apart from the first which takes 1 minute 20 seconds. Any idea where the issue could lie? Total race time is just over 5 minutes

[@axelbanda23]

so everything seems to be fine the script starts running but nothing moves on the screen and i enabled remote play ps4 controller but nothing hapens :(

[@SillyLlamaz]

Numbers start rolling? Try changing usb port for controller 😊

[@axelbanda23]

@@SillyLlamaz still nothing :(

[@SillyLlamaz]

But numbers in macro, are they running?

[@axelbanda23]

@@SillyLlamaz yes sir

[@SillyLlamaz]

Okey okey, that's good. That means inputs are sent out. Okey, do you have the control of the controller prior to pushing play?

[@Ronin_B15]

My good man has anyone told you they love you today? If not ...I Love You maaan! 😁 I just setup your script exactly as you instructed and the script has been running flawlessly . You are a life save big guy...thanks a million! If I'm ever in Estonia I would love to buy you some beers.

[@terrencewilliams7405]

is the car suppose to ride the wall? and why does the car stop right before the finish line and let cars pass before running again and it doesnt start the next race once finished?

[@SillyLlamaz]

Grinding the wall is normal, but you need specific lap times with the grind! How does Tomahawk run for You? Lap times to aim: With bad oil atm: 1. 0.46 2. 0.43 3. 0.41 4. 0.41 5. 0.42 6. 0.43 Total time: 4.17... It doesn't restart because your total laptimes is outside the recording. Try changing tires and settings to get those laptimes. I use default, AT, and R2 as accelerator

[@terrencewilliams7405]

@@SillyLlamaz when the race started the car hit other cars I guess that messed things up

[@SillyLlamaz]

​@@terrencewilliams7405 yes probably. Check my previous updated comment

[@terrencewilliams7405]

@@SillyLlamaz I only tried 2 times the oil is good I just bought the car and my lap times are first lap 50+ the rest 45+ total time 4:42.003

[@SillyLlamaz]

Shit...okey okey. The script is "tight", so it only has a buffer about 14 seconds total. If You can't get lap times down, by trying different tires for example. I can record a new script that has bigger buffer size. Please try other options first. If it doesn't work, I will do it tomorrow 😊

[@yakbabbler]

This is still working for 1.35, including the updated script. I did need to do the following to make it fully work. When starting remote play it will say you need to update make sure to say NO and it will continue with no issue. Make sure both the computer and the ps5 are on the same LAN and not on Wi-Fi. Make sure the micro usb cable is fully functional and properly connected to the DS4. If you unlock a roulette ticket you will need to restart the script. Otherwise I followed the setup guide and everything is working 100% so far running for 3 hours straight

[@SillyLlamaz]

Perfect! 😇🥰

[@jamesfoster5165]

Had a few headaches getting this to work: -macro program needs to stay in the folder with other files once extracted -PS4 controller MUST be plugged in for remote play to work with PS5. After those two things….😎 Much appreciation!

[@SillyLlamaz]

Sweeeet! 🥰🥰Enjoy

[@MrKallas]

hey man i tried running the macro on ps4 using a ps4 controller and i used the latest script (Tomahawk CLEAN RACE SLOW 1.1) it works fine at first but after you join the race and you need to press “next” to start it it just sits there without continuing

[@SillyLlamaz]

WiFi connection or cable?

[@MrKallas]

@@SillyLlamaz i use LAN cable on a wifi repeater extender but my wifi is really good now idk maybe its a connection problem

[@SillyLlamaz]

@MrKallas it is connection issue about 90% of the time...i have learned...test it

[@timrevis9095]

I go through all the steps and when I go to start the script nothing happens. Just recently got the game and have issues with a bad disc in my neck so running race after race is hard on my hands. I have tried and tried to get the script to work but no luck. Since I have no clue about scripts I am guessing I missed one small setting. Only had a ps5 and the game for a couple of weeks.

[@Martin-uj6zn]

are you following all the instructions to the T? what console are you playing on?

[@timrevis9095]

@@Martin-uj6zn PS5 and yes but script doesn't run

[@SillyLlamaz]

Seems like you using PS5 controller?

[@timrevis9095]

@@SillyLlamaz have tried with both ps4 and ps5

[@RIKUDEN27]

I can't get the script to work, can you help me please?

[@BillAshtonNelo]

I messed up my controller settings and assist settings does any one know how to reset default or what the default is?

[@worldwar1424]

It didn’t work for me, it got denied access to remote play after I installed update, so I reinstall it to get rid of update?

[@SillyLlamaz]

Yes. Do not update. It's written everywhere 😀

[@worldwar1424]

@@SillyLlamazi haven’t seen it because I was watching and following the steps at the same time

[@worldwar1424]

@@SillyLlamaz so all I need to do is delete then reinstall it and don’t update?

[@SillyLlamaz]

Yes! 😊

[@worldwar1424]

@@SillyLlamaz alright so It works it’s just my goofy ahh internet, thanks

[@ARM_Producciones]

Hey, amazing method and script! Thanks a lot. I've got a problem though, when it finishes the race, it won't exit the tournament. I have to exit manually and run the script again every single time. Any ideas? Thanks for your work!

[@ARM_Producciones]

I've noticed my script is 91780 frames instead of 100097. What the heck?

[@SillyLlamaz]

Hmmmm, are you running the corrrect one? 😀 I will make a new better version of that script tomorrow!

[@ARM_Producciones]

@@SillyLlamaz I'm running the one on this description. Is there anything else I should do?

[@SillyLlamaz]

Aaaa, I get it. Video has the old material. Old scripts. Description one is correct! But it still needs a bit perfecting. Coming tomorrow 😊

[@ARM_Producciones]

@@SillyLlamaz Awesome! Thanks, man!

[@andreimelo135]

Is it working for 1.36??

[@motosadist]

Thanks a lot for this timesaver! It's really gives gt7 second life :) But doesn't work correctly on original ps4: it's takes 35+ seconds from pushing "enter" in championship screen to "next" button appearing. Is it possible to modify timings for good old system?

[@SillyLlamaz]

Thanks Oleg! 😊🥰🥰 with ps4 you are 100% right! Loading times mess it up. For ps4 users I made as video guide, to record your own script 😊😊 kzbin.info/www/bejne/kGaZZJ58d8x8jJY

[@SillyLlamaz]

Did you post the update? It shows comment was removed? Can you send it to [e-mail] , my work mail. KZbin deletes ALL comments with links, if it's not from the host. I HAD 2 notifications that you posted an update , sadly, I can't read them.

[@motosadist]

​@@SillyLlamaz Optimized your capture a bit by deleting unused data (controller position, timestamps, battery status etc): now it's around 10x less in size. Also modded it a bit by adding idle times and so PS4-ready version is born :) sent link to your mail TODO: - rewrite manual to actual manual (not my silly sketch) - add rapid extra "X" after reward confirmation (to confirm lottery ticket) - calculate best left stick position to fix it as one value (trying to calculate from your record). This will allow to easy edit macros and optimsize it from 100000 string lines like "now LX position 126, now LX position 127" what program reads every frame to few "update LX position to 356 and do nothing with it next 5 minutes" - while in race we actually can add set of rapid "X"s, "O"s and pad directions to restore correct championship if something goes wrong. And vice versa: while in menu we can still constantly push R2 and a bit left stick to continue race, if it's still going PS4 version runs smoothly already about 60 hours without any problems (exept lottery tickets)

[@motosadist]

Calculating and analyzing big data just to get right number from 128 to 255 is too overwhelming and complicated solution. Tested few values and as result can say what "152" is best: you still stick to wall (with 151 car moves to next lane after turns) but now with "lower pressure" to it so lap times must became a bit better.

[@SillyLlamaz]

Nice!! I got your email too 🥰🥰 I will upload it ASAP! I will add thank You to You as well 😀🥰

[@I-M-Pulsive]

Will there be a Macro for mac?

[@stnleyb]

Ever run into a triple input issue? Seems to do all initial inputs 3 times per. End up at World GT Series before it stalls in menus

[@stnleyb]

Okay, created a small script and when I ran mine it had triple inputs too.

[@SillyLlamaz]

All inputs tripeled? Or just ones in the menu?

[@stnleyb]

@@SillyLlamaz Never got past the menus, but I'll try a script from race start. 🤔

[@stnleyb]

​@@SillyLlamaz this is a genius idea you came up with 👍🏾

[@SillyLlamaz]

@Stanley Bertrand thank you! Are you running it on ps4 or ps5? Using ps4 controller? All LAN connected?

[@oralhoG]

hi, where is the scrip make money? i download the xml (Tomahawk Clean Race Tight 2) the macro dont play the xml can you help or anyone? thanks

[@SillyLlamaz]

Hey Hey. Script name is not Tight, it's SLOW 1.1. Secondly, what does it do? Ps4 controller wired?

[@oralhoG]

@@SillyLlamaz ps5 controller connect on pc

[@oralhoG]

@@SillyLlamaz the macro dont run, is because of the ps5 controller?

[@oralhoG]

@@SillyLlamaz sorry to many questions! i have connect a ps5 controller and the slow 1.1 dont run on the macro

[@SillyLlamaz]

PS5 controller Does NOT work! Sadly! PS4 CONTROLLER Only 😊

[@aznboisayain]

If you do update the code, the car has overtake or does that not make a difference

[@SillyLlamaz]

It overtakes from outside, so no extra code needed

[@GregRakers]

Hi, great video again. Exactly my thoughts on GT7 and money making/collecting cars while having a busy life. My question is around only PS5 hardware - I hear you saying it IS possible without PS4 controller. Still I have no clue about where/how to connect the PS5 controller and make this work. Do I need to connect PS5 controller to Windows PC with Bluetooth or so to make it work? Please advise or somebody else. Cheers!!

[@GregRakers]

btw: love the Adam's as well... great monitors...

[@GregRakers]

Nevermind. PS5 Controller won't work I read below. From the video I thought you said there was a chance. But this route is locked out by Polyphony 😞

[@SillyLlamaz]

Yes, sorry for the long wait. True, Polyphony is the devil 😀 PS5 controller has a lot more security measures. Only PS4 controller STILL works. May I remind you...only 5.5 official version of remote software works. So PS also ruined using macros outside of local network...so...it's a thing hair we have! 😀

[@SillyLlamaz]

Yes they are (Adam's) 🥰🥰🥰

[@Chann0097]

@@SillyLlamaz you think you could make a new macro where it does the final championship? Or one that makes a bit more money? I don’t want to be greedy but at the same time the McLaren F1 is 20 mil cr which takes to long to get.

[@tonyle4307]

What do I have to change for my tomahawk because it comes with pp 900 and in the videos its 800

[@ericheick7044]

his might be lower due to dirty oil

[@SillyLlamaz]

I think it's broken engine, dirty oil etc. 😊If you win and script starts again. Then all good 😊

[@tonyle4307]

@@SillyLlamaz no Clean race?

[@SillyLlamaz]

@@tonyle4307 it should get clean race. Doesn't it for you?

[@tonyle4307]

@@SillyLlamaz i tried multiple tires but the macro keep smackin the wall and doing 360• sometimes

[@w0bblyd0inkb0ink]

Oh my God, it worked first time! Thank you so so so much!, 1:06, 0:47, 0:46, 1:13, 1:09, it crashes quite a lot though, 6 lap race, finished at position 15/15 and 6th lap there's a lot of very long pauses and crashes. It raced first 6 lap race at Blue Moon Bay Speedway and stops there at race result screen without further progressing, made Cr. 5,600.

[@jimmyjamfest]

Still working for me on 1.36. Should reach 100 million in credits tonight after having it run nonstop this week. Thanks so much! 😊

[@joaohssgamer]

Hey are you playing on PS5? The macro always goes as far as the main menu and after it just does not start the race

[@jimmyjamfest]

⁠@@joaohssgamer Yes I’ve used the same setup since June through multiple updates with very few problems: Tomahawk Clean Race Slow 1.1 script on PS5 hooked up via a wired home network connection to an HP laptop with a Dualshock 4 controller plugged into a USB3.0 port. Do not update the PS Remote Play program when it prompts and turn off all other programs running in the background. Also someone else recommended to make sure you are using a good quality USB cable with the controller.

[@miguelcunha4157]

@@jimmyjamfest sabes se este glitch funciona com um portátil e uma PS4?

[@KLM1977]

Salut psremote a cesser de fonctionner J'ai voulu le réinstaller voici le message que j'ai as-tu une solution? Windows Installer X Unable to open this installation package. Check with your application reseller to make sure this Windows Installer package is valid.

[@SillyLlamaz]

Open as administrator 😊

[@KLM1977]

​@@SillyLlamaz I've already done it as an administrator, I also installed version 6 which installs perfectly, I don't understand, I'm waiting for an update for version 6 if one day it comes out...thank you

[@SillyLlamaz]

@KLM1977 I am making update video now! Out in a few days

[@KLM1977]

​@@SillyLlamaz I'm looking forward to it, frankly, you're ripping

[@2retro]

My man, this is outstanding! It's exactly what I needed - thank you!! I followed your other video and recorded my own script for PS4 - took me a couple of tries to get it just right on the latest 1.37 update but now it runs perfectly. It's been grinding away on my behalf for over 24 hours now without messing up. Thanks again. 🏆🏆🏆

[@SillyLlamaz]

I am very happy to help! 🥰

[@BillAshtonNelo]

Please link script

[@BrunoGomes-t2j]

Could you share your script ?

[@shawncassar8948]

i think that as regards to this script they dropped the credits for the daytona oval right?