I MADE A HUGE MISTAKE WHEN BUILDING MY JAZZ TYPE R...

[@JackMcNeillCars]

Get 4 months extra on a 2 year plan here: nordvpn.com/jackmcneill. It’s risk free with Nord’s 30 day money-back guarantee!

[@Mattlawton-ft6ew]

You can afford to buy a civic type r tho 🤔

[@Mattlawton-ft6ew]

Why haven't you primed the rocker 🤔

[@Mattlawton-ft6ew]

You need a 3 door car

[@Mattlawton-ft6ew]

Thoes rear lights 😍👍🔥

[@jonathanhughes8326]

Looking great mate only one thing I’d do is put some wheel spaces on they a little too tucked into the arches

[@jarrad5723]

Wrong. Looks very track ready.

[@jonathanhughes8326]

@@jarrad5723 it might be track ready but looks wise would look great with spaces

[@LeSwexy]

@@jarrad5723 You have no idea what you are talking about dude hahahahaha. Spacers have nothing to do with a car being track ready.

[@JNASLDN]

if the plan is to only track it, i suggest avoid using spacers, but if its for mainly for show purposes and normal road use, then defo get some spacers on.

[@LeSwexy]

@@JNASLDN Spacers do absolutely nothing to a track ready car man, infact a lot of expensive high end cars already have them from factory to get a perfect fitment. Including Porches and BMWs

[@mattharrison1061]

hi mate, if you get a flat sanding block and scuff at the Honda badge on the rocker, it will leave a chrome finish Honda logo and look 10x nicer :). just a suggestion

[@Danny84.]

Sort the honda badge on the rocker cover. Scrap the paint off and paint it white or leave it sliver 👌

[@JackMcNeillCars]

Yeh doing this soon 😎

[@mikedinni6318]

Scrape*

[@Danny84.]

@mikedinni6318 you tell I stayed in school csnt you 😂😂

[@djmandrick]

JDM ep3 had a front diff which I've had fitted to mine. (I imported one from Japan, new, for an Integra - there are limited numbers so if you see one get it). Expensive but game changer. If you were excited about the first drive what 'til you get it mapped, they drop Vtec to 4600 and up the RPM to 8200. Its a different animal. check oil regularly and keep 1L on you, you will burn oil each time you're in VTEC. If not, its not monitored and it is oil starved even for a short time. it's likely blown head gasket time. Hope that helps. Always use genuine Honda parts and my performance garage also recommends keeping Honda oil in it.

[@JackMcNeillCars]

Thankyou for this advice man!

[@djmandrick]

@@JackMcNeillCars No worries, I'm really enjoying the build, the drive to get in there and give it a go is commendable. I had my oil changed last week and after refiling it they pulled the fuse (Im guessing to the fuel pump) then turned it over for about 5-10 seconds. When i asked, was told this allows oil pressure to build up, before they refitted the fuse to start it. Prevents you running it from dry as he said in some cases it can take 15 seconds on start to get the oil up to pressure and all the way round. Thought I'd pass that one on as i noted on your first start up just fired it up on it's first go. Looking forward to the next one.

[@garystinten9339]

I thought all oil came from dynosaurs.

[@Kypcia]

Some of the information you've given is false: - Get it mapped IF there are any mods. Standard ECU map will do fine. - Map on a dyno - dropping VTEC without any significant mods will result in a power dip - Honda knew where the crossover should be put. - Reduced oil will result in oil starvation, usually ruining the crank bearings and the engine will knock. The head gasket will blow on age, overheating or boost. Otherwise yes, a front LSD is good, OEM helical. They are easy to find in the UK and usually a whole gearbox with LSD is around 700-800 GBP. I would recommend a shorter final drive from FN2 (5.1) or a 5.33 (much rarer, like FWD USDM K24 CR-V and such)

[@thesilentgametestr]

Build is looking good. I don't know if you were already planning it, but after seeing the new interior change the grey roof/pillar lining let's it down and would look much better if it was black.

[@draidangraham]

Jack, you have nailed the formula. Your project is relatable, your filming and delivery are spot on, editing is great. Huge future ahead of you. Keep creating, I love it 👍

[@JackMcNeillCars]

Thanks man 😇

[@GILESY1973]

Turbo the jazz 👍🏼

[@TheCommentator353]

Real vtec is n/a 😂

[@Zikhr]

Takes away most of the fun of the car, trust me

[@anon7661]

Its pissing oil as it is. 10k that engine apparently 😂

[@jedbriimc9879]

​he may make it back from advertising luckily lol

[@anon7661]

​@@jedbriimc9879 he already has 👍

[@Filipe1020]

I just discovered your channel today and it has been a treat to follow your consistent progress on your car every single video, thank you for not doing the typical british car youtuber thing of buying a new car every week and never finishing any of them, having a junkyard of unfinished projects as a result. I much prefer this format of making video after video on one single car and make a complete project out of it.

[@Skurvster]

Good call on replacing the timing chain, genuine parts = Honda reliability. Make sure to change the chain tensioner if you replaced that with a cheap aftermarket. Watch out for leaks on the valve cover. That wrinkle is not going to seat the cover seals correctly and will bleed through. If you clutch pedal is hard, now is the time to replace them. They cheap, an exedy oem, try Tegiwa. Also a good time to replace the flywheel with a lightened facelift one if yours is the pre facelift engine. After a skim, they good as new

[@djalextruth9152]

Hi Guys, just found your channnel and found it interesting, I am a motor engineer and a honda FD2 owner, love what your doing and yes you will make a lot of mistakes .. its all part of the fun.

[@djalextruth9152]

Oh and they do make a type R jazz in japan its calle a fit R

[@KartsAgainstHumanity]

You are living my dream... I don't think I've ever said this but this is my favourite build on youtube. It scratches my brain in the right way with how you're doing pretty much everything properly OEM as if it were factory. And the Jazz is a seriously underrated car past it's grandma reputation - Love mine to bits even in completely standard form. Maybe I'll keep it when I get a new car and hopefully do something like this some day.

[@JackMcNeillCars]

I’m so glad you enjoy man! It scratches my brain just right too😂

[@Idk_nothinghere]

​you should we painted white right now

[@tahahaider5836]

Oem+

[@KartsAgainstHumanity]

@@tahahaider5836 As it should be 😎

[@Snoop_gee]

Re: Engine since your doing the timing chain etc. Please look into skunk2 Kseries Timing Chain Cover RAW or Black . Features a two-piece design which facilitates easy timing gear access and cylinder head removal

[@garystinten9339]

23:26 make it a half circle so the pulley is totally avoided.. or a quarter sphere so its completely cleared.

[@da-mazing8500]

This needs a spoiler now and with paint, will look spot on 👌

[@stuartsnowden4824]

Just discovered this. I’m a Honda fan. I bought my first Honda In Australia in 2005, an Accord Euro (as it was named in Australia) 2.4 litre iVtec. Then bought my first new Civic TypeR in 2007. Traded that for a new 2010 Civic Type R. My wife currently drives a 2017 Jazz. That’s the 4th Jazz we have had. Nice content…keep it up.

[@tomahawk8636]

I've got those rear lights on my jazz. You'll need to replace one of the reverse light bulbs with a red coloured bulb and use the rear fog light connector for an MOT 👍 really glad I found your videos, you're doing everything I wish I could do with mine! Such an underrated car, bet its so fun to drive with the engine

[@JackMcNeillCars]

Hahah yes it is man! It’s the best car I’ve owned 😂

[@nigeledgar3683]

Very tasteful mods mate. I love the OEM+ look.

[@JackMcNeillCars]

Thankyou!!!

[@KiwiColour80]

You Remind me so much of myself 20 years ago on my Saxo VTR in my parent's garage - Wish we had youtube back then or the thought to document stuff in the max power era like you do now! . Im 44 now and run my own bodywork business so its gone from a hobby to a living so ive no time or willing for my own cars!! but enjoy watching you and others. Car looks great. bet they'd go wild for it in Japan when it's done. All the best.

[@andrei1308]

Watched this build from the very beginning and man, all i want to say is that this is my dream car rn. There’s something so classy about a pure n/a 2000’s honda, i love it, keep it up

[@S2KG]

U need bigger spacers for the rims and a sports exhaust manifold to make it look a lot nicer 😉

[@Jake_Be]

Love what your doing to the car man, you’re absolutely doing this car justice Maybe some spacers to get rid of that wheel gap you have??? Also if u want you can get some performance pedals for the car too (there is some metal covers that go over the old ones if u like)

[@-Lucky-Six-]

loving this series, if youre going to the trouble of full paint while you smooth the wiper delete on the back, do the same for the rear door handles (obviously NEVER flip the child locks on though!)

[@JakeHewlett]

The JDM type R you used at 20 seconds in happens to be my old car, awesome to see it still used, good luck with the Jazz 👍

[@fear_niclovo3187]

Ok first: spoiler, bigger disks, bigger Brakes, better suspension(lower), AWD?, turbo tune !!!!!!!!!!!!!!. Second: love your serie man its really cool to see a normal car turn into a sportscar. Keep up te grind 💪💪

[@JayDavidson46]

Honestly my favourite creator out there I love the effort. For the boot, move the jazz badge to the left side and the type r badge on the right.

[@StanleyKubick1]

stoked for you! sand or scrape the paint off the honda logo for the full effect

[@JackMcNeillCars]

Hahaha yes soon 😎

[@Pholiage]

Are you getting a rear hatch spoiler like the Ep3 has? Also you can use the gauge cluster. You "just" have to get the service manuals for both versions and put the pins in the right location. They both use CAN bus so it should more or less be "plug and play" after repinning. Alot of work. But worth it imo

[@JackMcNeillCars]

It may or may not be in the works

[@KylejFaulkner88]

Keep up the good work lad, loving the Jazz 🤙

[@jlee7294]

Eagerly await each episode of this series, keep them coming!! 🔝🔝

[@JackMcNeillCars]

Thankyou!

[@moamed2006]

I've always thought a dream hatchback would be a jazz type R, the jazz size/practicalness with a performance engine and you correctly made all the right choices, the wheels, removing the smoked lights (chav spec) and changing the boring silver jazz colour, well done keep it up!

[@FSP9.]

We need a POV drive when’s it’s all done 👍 and some more driving clips 🫢

[@JackMcNeillCars]

Deffo 🔥

[@CreeperSlayer3YT]

Hi Jack, love this series, keep up the great work!! ❤ 👍

[@MrRetroGeek]

You can take apart the instrument clusters and swap parts between then. So put the dark Jazz sport instrument cover with the rev counter numbers, etc into the stock unit, reassemble and install it onto the jazz. I’ve done it on a Clio before swapping a clio dash cover with an RS one. Relatively easy to do.

[@MrRetroGeek]

Benefit is it saves the need to recode the cluster

[@KeyboardsGray]

Absolutely loving this series! I’ve had a 1st and 2nd gen Jazz and wish I’d have been brave/mad enough to try this!

[@Scotty_AV]

Replaced the chain and guides with genuine parts on my K20 engine which was second hand, after replacing on my FN2. Chain kit + guides was £550 just for parts. Subbed, I told Honda UK to do this a long time ago, but was told that they don't want to upset their loyal Jazz customer base. 🤣

[@joshpollard9098]

For the speedo you can open the both up and swap over the dial graphics and needles then you can install it using the oem plugs

[@maxking1431]

I always see whipping around you woodley late at night, can hear you coming a mile away haha! love the content bro

[@subaruhawkeyeimpreza]

Good work bro, only thing externally I’d add is a rear spoiler, interior wise I would get the carpets redone to make them more black to suit the colour of the seats

[@BIN3RY]

15:34 those rear lights look so good. The tinted ones looked ok but the 4th attempt really hit the mark 👍

[@samwilson756]

When using rattlecans for spraying to help avoid heavy spraying hang the item you want painted. You want the can to be vertical while spraying. The 1st coat should only be a dusting and should take atleast 3 coats to cover the material completely

[@k24you]

Rocket cover should be tighten in several order and torque by the spec . Also you should check condition of the gasket and clean all surfaces if you don't want leaks 😂 only friendly reminder 😉 great work . With a red Jdm carpet will be amazing! !

[@JackMcNeillCars]

Hahah Thankyou bro, but engine won’t be running until after I sort the front cover leak so no real reason to follow the torque specs and order. But thanks for the heads up anyways probably would’ve forgotten 😅

[@Snoop_gee]

it honestly looks so much better the red valve cover, tail lights and interior . continue to make it look amazing. so invested in these episode continue to do your good work.

[@ryank5088]

I've used that VHT a handful of times it's good stuff... I use a piece of wood underneath the cover so it's edges aren't sat on the ground. 15 minute intervals and then heat but what I didn't know till later on you can spray any areas that aren't wrinkling as much. Keep it up 🤘

[@honda.spares.man1]

You need a lot of heat on the rocker when painting to get the wrinkle out. You can use a sanding block to get the honda writing shiny again

[@rogerjones8069]

Didn’t see any rear headrests and now it’s such a killer jazz - all your mates will be piling in the back - not the most comfy of things without them! Black like the EP3 to contrast with the red 👍 paint 100% the way to go. As a few have said previously, slight spacers to fill those arches a touch more. Really fun build to watch

[@kimi1984]

Hi Jack! 50/50 on the new rear lights. HOWEVER, looks good. Get yourself some silver indicator bulbs, they'll make such a subtle difference, but look great! 😊

[@deanmathers4483]

Really enjoying this series and your genuine enthusiasm, keep up the great content.

[@Atochaf1]

I like that you are honest and admit the mistakes you make! That's rare nowadays! I wish I was 20 years old... I'd start a Honda like that too. :) Keep it up! It's getting better and better!

[@TheJacob185]

how about buy a torque wrench and a Haynes manual you absolute animal!! great video again man keep going!!!

[@JackMcNeillCars]

😂😂 thanks man

[@f12ehn4]

sick type r jazz would look sick in that white keep up the good work loving your builds

[@f12ehn4]

if only you could get custom headlights

[@fuzzy_potato4533]

Cars looking great but as you were removing the boot, i noticed that the rear right seatbelt is tucked behind the black plastic trim. I didn't see any other comments about this so just a heads up.

[@isitafox]

Good choice on the rear lights, just needs the optional boot spoiler if you can find one!

[@haideryhhh_]

Looks much better!! Love the videos jack keep it up bro.

[@kiwi_commander]

I love the route you are taking this build; it definitely looks like something that would have come out of a Honda factory. Keep up the great work!

[@TeamEmperor1]

Great build but bin that air filter/induction even the stock airbox would be better than that garbage. Or replace with Gruppe M ITG Maxogen AEM CAI (bumper fitment) Hondata mod OEM intake Mugen

[@ricardo1e93]

Get an LED 3rd stop to match the taillight. It'll compete the rear lights properly.

[@JackMcNeillCars]

Hmmm where to find one though…

[@D.Daniels1990]

Amazing content. Super relatable & genuinely a wicked presenter 👊

[@danielthompson743]

You are a genius your doing what everyone of us wants to do, keep this content up, very unique

[@ruben1368]

Now u need some spacers and maybe rolll a bit the fenders to give a nice fitment(just an opinion I’m loving the process)

[@djdrwatson]

16:52 Should've chnaged and put some better speakers into the doors while you were there. I think the speaker mounting holes are not in a standard position and will need adapting to fit. The car is looking great so far. Keep going, you're nearly there so you might as well go the whole hog now! 😃

[@StraightOutThaGudda4U]

Love how everything came out! Just need custom red floor carpet and the interior will be done! And find a way to wire that new cluster gauge in because that one looked wayytt better haha, love all the progress on it and pulling the motor out and getting everything painted is the right move, now you know all your mistakes it's time to get everything done right 😎 great work man

[@forestfaint9269]

Recently started to watch your videos, love the build! Not only you get a Type R experience, it can also be used as a proper family car unlike the Civic Type R!

[@8B0Gaming]

absolutely loving this series, keep going mate your doing a great job, supporting from New Zealand

[@AndrewDuncan-f5p]

got engine may be bad got clocks dont fit got paint cant paint got bootlid and finally did something right with all respect you have done this car justice i love it

[@drivewayjunkie]

What colour is your Honda Jazz Type R?

[@moegamatcassiemdevine9257]

What an amazing build! Dont forget to add the jazz vtec (sport) rear boot spoiler. Unless you plan on adding a mugen style spoiler that will mimic the civic type r?

[@1066wastrel]

Good luck making it go round corners Jack, mine wasn`t even helped by a set of Toyo sports boots, mine go`s around corners like a puppy on a leash, I reckon your gonna need a roll cage! Really enjoying these posts BTW, I hope it`s all worth it in the end, you seem to have some quite talented mates so make sure to give it to someone who can get the best out of it when your finished for a spirited test drive!

[@demo6586]

Ur videos literally give old day matarmstrong vibes love it!

[@harryvalvlogz1381]

This car is turning out to be soo good. Please don’t side body this like the comments are saying it’ll just ruin it’s beauty 🙏

[@xxericxx1048]

love the videos so far man !! i think that the red on the engine cover looks a bit odd without the manifolds being polished , and now that you’re taking the engine out , it would be the perfect timing to do that. Keep it up mate 💪🏼

[@Unknown-zy9cu]

What’s the rust situation looking like on it? I would deffo take a good look at the underside and common rust areas to tidy it up a bit maybe get it undersealed at some point

[@anonlincracing2484]

Honda logo on the engine needs sanding back im sure 4-600 grit on a hard block then a wipe down

[@dillons_cars5634]

I think you need to tint the white part only at the top of the new tailights to match the already tinted reverse part on them. Then it will be perfect

[@thequillaX]

What would really step up the interior game is some good oem looking black floor mats. makes a huge difference in any car

[@trickyg9130]

Just a thought with the clusters. If they are exactly the same sizes you might be able the swap the dial backing plates over by stripping them down. Hope that makes sense, so the the sport dials get changed over into the standard jazz dial casing.

[@marky8868]

Looks great mate! Well done. Definitely jet wash the engine bay when you get the engine out. Looking forward to seeing the progress!

[@GodxAdi]

after fixing all sorts of issue i recommend u to install a turbo in a honda jazz type r it will be super crazy . full spport jack go on mann

[@Jahmed5635]

Rear lights remind of Integra lights for some reason, car looks sick 😂👌👌

[@alisonchristie-upton6212]

Awesome! Loving the new interior. I have a Jazz sport with the dull interior... so maybe one day...

[@baheh1801]

I think for more type r Ness you need some chassis stiffening. Strut braces and maybe some stiffening underneath if there is any places to fit it

[@19sasuke91]

I love how u just dive in and get it done problems? what problems i got solutions - Im on the path to doing this myself just need some starting money to get a project car and bits to fix it!

[@gavinstreet9694]

I have loved watching this build nice to see a car that most people could do rather than the usual super cars. Interior looks great, are you planning on changing the carpet/door pillars and head liner to black as that would complete it, it never ends does it 😂

[@liamtownshend7726]

Looks sick mate SPACERS FOR THE WHEELS NEEDED NEXT !!!!!!

[@da-mazing8500]

Well done on the steering wheel. I was waiting for the to bash yourself in the face!! Jeep it up. Really good series

[@asifs8083]

Excellent build, a red interior carpet would make a good video, it would probably be a first for a Honda Jazz!

[@voidbringer7481]

loving the vids mate a great series keep them coming!!

[@scottporter2513]

Got the rear lights spot on now! 👌

[@jordymartin97]

Keep these videos coming there amazing and we are learning a lot 😊

[@jclc4201]

Nice vid man. Powdercoat the headers so the engine bay would look cleaner.

[@junggyuszko]

Might as well research where you need to put Hondabond when installing a rocker cover/gasket to avoid more oil leaks in the future

[@dannywaghorn7120]

Loving this build!!! Done the way i would do it, modified but looks OEM. Perfect, keep up the good work.

[@ReynoldsThemeparkAdventures]

Time to wrap the car! Full wrap including door shuts and everything, champ white of course. 💯👌🏻 The silver just isn't doing it for the build!

[@Turbz24]

Love this build buddy. That interior wow just wow! 👍🏻

[@Lordwrightyy]

Loving this bukd . Defo think Wheel spacers and a type r type spoiler will look well. Are you cleaning up the engine while it's out too??

[@tomtaylor5950]

Get the headliner retrimmed along with all the pillars bro, looks sick!

[@nithyachandradas7015]

Add a small wing on that matches the body kit that would be cool

[@NAMEDTODIE]

randomly found the channel yesterday and was enjoying all your jazz upgrades, then today a jazz happens to drive past me :') wish it was this one haha

[@Kalus_Saxon]

3:03 if there’s no adaptor plug spray the surround and tint the dials

[@trimmxx2169]

its looking amazing mate just think its missing a subtle spoiler mod

[@darylporter3256]

Looking good, bit needs a spoiler at the back. They should of made a type r Jazz from factory