Basic Electronic Components - The Thyristor (SCR)

[@vantuilpinheiro8433]

The only one capable of explaining something about SCRs I've found by here. Good work!

[@JoshKaufmanstuff]

Great Explanation! I watched GreatScott's video and was scratching my head, you made it more clear.

[@jasperjamir6621]

Logged in just to comment how good this video is. Thank you very much. I liked how you first gave an overview of SCR before explaining it in detail.

[@luigitaddeo7051]

well done Jacob, very intuitive and instructive video

[@jonnyphenomenon]

Thanks for explaining this. I was troubleshooting a non functioning AC to DC variable speed motor control (for a pottery wheel) which had some circuitry that I wasn't familiar with. it had two S4020L thyristors in it, and I couldn't find any mention of them in the circuit simulators I usually work with. Your video helped me to understand how these are used to both rectify and regulate the speed of a motor. And as an added bonus, helped me to isolate the burned out components. (Burned out resistors on the gate channel.)

[@agstechnicalsupport]

A very good introduction into thyristors and their use. Thank you !

[@brianwebb175]

You're a natural teacher!!!

[@JohnDop]

Really good video on SCRs. I'm away to watch your other videos now. Please keep up the good work!

[@PTIrealsupports194]

Great job done by great person........ Great service for humanity

[@ItsGmar]

Great Video although it seems it has been awhile since you have posted, this video was very helpful. Watching your older videos to now you have really grown from a pupil to a teacher. I think you really have a knack for teaching. You should post more!

[@kishore4274]

very precisely and clearly explained, thanks!

[@aminmm7855]

Great explanation! You rock man! God bless you

[@funyable1]

man how have I not seen your videos before this was great

[@joshmeiyb]

That's really a great explanation! Thank you!

[@gilbertmutambo5184]

Clear and straight to the points.... Thank you very much

[@GrantsPassTVRepair]

Very informative. Thanks!

[@albertpicher832]

Man you are good. Excellent explanation.

[@ali177zia]

excellent work. amazing explanation. thank you.

[@joshuaogundairo1380]

Thank you Your explanation >>>

[@oliverstrange5329]

Nice video. Gave me some hope for my exam.

[@TheRealKuif]

Solid explanation all the way. Great examples

[@jacobdykstra8499]

Thanks! I appreciate your comment. Great comments always keep me motivated.

[@tariqal-najjar2132]

Much respect man❤

[@SagarYammiyavar]

great video ! good simple explanation

[@w3stsid3balla10]

Great video and explanation!

[@peckelhaze6934]

Very good and informative.

[@danielvindas9489]

Wow, actually I'm learning more with your video than If I was watching other ones sorry for my english!

[@HeraldOfTheChange]

If you know your English is not that good, then it's probably not that bad.

[@passiontechklm]

Very good tutorial... thanks alot

[@abrahamadam8357]

Thank you so much for your help and advice

[@mfundondlovu706]

Good work bro

[@md.kamrulhasanrabby46batch11]

Thanks a lot man❤❤

[@martinrandez7021]

excellent explanation! thank you!!! I needed that :)

[@Edw590]

Thank you for the video!

[@RR31982]

Very good video

[@placebomessiah]

Thanks for this! You rock Jacob

[@justin39640]

SCRs were used in forklifts for PWM series motor control for traction and lift hydraulics. Some operate at very high currents between 12 and 80 VDC. GE made a whole range of them for many decades. They were popular because high amperage transistors were cost prohibitive until fairly recently. Prior to SCR most used giant resistors with shorting solenoids for the "gears". Very bumpy. SCR made it feel more like a proper accelerator. It is clunky what needs to happen just to shut the main SCR down in the systems. Transistors are nice and neat lol.

[@labtronics1140]

Thanks!!

[@nullpointerworks4036]

So a potentiometer hooked to a thyrister gives you an PWM-esque effect for AC? Using a triac would complete the PWM for the full waveform.

[@andugezahagn7007]

Thanks, that is awesome

[@MrJatind3r29]

great Video!

[@lusanimudau720]

Hello Good work I have to say... Can you please help me, How do you control the delay angle of Thyristor

[@juanpvazquez3701]

Thank you very much sir.

[@kentakano3562]

thankyou master jacob

[@gfj8438]

GREAT JOB!!! TKS

[@Strider362]

best scr vid

[@muneebfida4364]

Could you please do the videos on MOSFET, IGBT and BJT as well?

[@onyekadiego3333]

Please what's holding current

[@nestorshahaf6788]

How can I change de circuit that they are always on (8 steady on)?

[@loganocchionero6621]

I swear my electronics teacher fuckin sucks. THIS MAKES SENSE NOW

[@jundeozamora380]

Good day Sir can I ask you something?

[@sudishkrishnankrishnan7237]

Good and use fullll

[@bigmouthtv9893]

Helpful

[@rsattahip]

I've only seen them in portable spot welding power supplies.

[@rudihidvary5354]

used high voltage DC transmission lines as well except they are quite large

[@advocatepheko2255]

Understandable

[@gojooyoung]

arent anode negative and cathode positive?

[@thavindus6184]

great!

[@kanishksharma8125]

Nice!

[@anlon3237]

Well that is actually simple

[@james77011]

I was always told that current flow from cathode to anode 😳

[@sandeshkhadka9505]

fking og... love youuu

[@nirbhaythacker6662]

Good explanation, you should probably plan your explanation so that you do not repeat the same concept in a different manner. This video is essentially 7-10 actual minutes. But still great video, hope you appreciate some constructive criticism. And this video only got 270 views, i hate this world.

[@spear130]

This video would be clearer if you talked slower and said less. It's great information, but please stay on topic.

[@louieluis8840]

Why cant you talk about it while youre on it already? You should site examples by showing numerical computaions instead of cloud explanations. I like the way The Organic Chemistry guy teaches.

[@gnquince]

You too same as all of youtube teachers, why don't you tell that what and how it happens when gate signal is applying and off the gate. All are reading only from the book but not one has said actually reason .! Its really bad

[@jacobdykstra8499]

Quince brietny I really can't understand what you are trying to say but I explain literally down to the electrons if you watch all my semiconductor videos. There are multiple videos that go along with this. I explain why it works quite detailed. Watch my other videos if you want a deeper explanation as to why this device behaves how it does.

[@gnquince]

Jacob Dykstra, please say why scr is not turning off when the gate signal is removed.

[@jacobdykstra8499]

Quince brietny the SCR is a latching device. Once current starts flowing it will not stop until the current reaches 0 for a specific amount of time. I am sure I explained this in the video.

[@gnquince]

Jacob Dykstra that means how the junction2 will work, forward or reverse???

[@Metallizombie]

@@gnquince When you forward bias an SCR you still have one remaining PN junction as described in the video. Once the gate current is applied, that barrier is overcome and you essentially have a standard diode. Instead of having a PNPN region you now functionally have a standard PN set up as in a a standard diode. This does not change as the electrons have already been “injected” by the gate so it continues to conduct as a standard PN diode even after removing the gate signal.

[@FrankieDoingIt]

What the heck is up guyssss

[@dio9605]

Silver chariot requiem lol

[@AIArtistAIA]

Nice video!Thanks a lot!