Jagg Oil Cooler Review

[@MidnightSportster]

Got my answer. At least its a cheap fix. Doing a stage 4 in my sportster and going to add this to the build.

[@dynademos]

That should keep her nice and cool

[@luiss4942]

I installed the low mount ultracool oil cooler on my 16 street bob. Had to put one in after the stage 2 install and it works awesome. I almost bought the jagg oil cooler but I was a little worried about the one I wanted being low mounted and having no protected grille.

[@dynademos]

Luis S, yeah i think the ultracool is superior, especially the fans. the jagg fan is basically a computer fan. Do you know the oil temperature drop by chance for the ultra cool? Thanks for watching 🤜🏽🤛🏽

[@randallperry6774]

Its like the juggs .these things run 250bucks up to around400. Alittle bit of plastic or pot metal and pc fans. Juggs or the one made with the horn. Im an old biker on ss and cant afford those prices.ill buy a couple of pc fans some wire and fabricate fans for 100bucks or less.

[@Bluis5445]

Just got mine today. Thanks Rob and leggo! Not bad for a bunch of pogs.

[@dynademos]

Bahaha thanks bro I will say rod fought the war so I didn’t even have too 😂he’s old 😬😂

[@exexpat11]

Love your fairing. Hmm. Fan looks like a computer fan. Might check for a computer fan with metal blades, high quality, that pushes tons of air as a mod. An oil cooler without a fan is still better than no cooler at all.

[@dynademos]

yes, I totally agree the fan is flimsy junk. this one hasn’t broken “yet” but i will update if it does

[@hawkdsl]

+ water proof.

[@Amika81]

axle separated from fan blades due to heat from oil cooler

[@lio1999]

You have installed both jagg and UC which one do you recommend more?

[@dekeama]

Nice review

[@donaldoehl7690]

Here's, perhaps. a dumb question: Couldn't one install on-off switch to fan?

[@dynademos]

Yea u could definitely do that

[@taps_1021]

Haven't had issues with my fan in two years . Have you done a oil change yet?

[@dynademos]

taps 1021 good to hear, No haven’t changed it yet.

[@dcmotorisk9517]

I have a 2016 FXDLS and I had an engine rebuild and clutch rebuild (because the clutch fused together from heat)! Have y’all had any issues with that with your dynas?

[@dynademos]

DCMOTORISK neither of us had must have got extremely hot !

[@dcmotorisk9517]

dynademos I’m sitting at 29,395 miles on mine. Maybe about 5,000 since the rebuild. I’m in DC and it gets murky up here! Do y’all only work on friends bikes or people willing to pay? I’m from near North Carolina and willing to do whatever to get this bike running correctly! I’ve had shit luck with this bike but I love it! Rode it to California and back!

[@dynademos]

DCMOTORISK just depends what do u need done ? Also if rods available as I am on the west coast now

[@chin0c0chin06]

is that fan from your cpu tower [plastic] ?

[@dynademos]

No man it’s off the jagg oil cooler

[@mauriceordonez4566]

Those fans seem a bit prone to damage . Would be nice to have a caged unit affixed to cooler frame. Also is it even weatherproof? I am in NYC and considering

[@dynademos]

Maurice Ordonez, cooler is good lowers oil 20-25 degrees. as for the fan it is not very good. To answer your question on Water proof yes it is waterproof.

[@stefanjonas6429]

I am running the "Jagg Oil Coolers 751-FP2500 Horiz Low-Mount 10 Row Fan-Assisted Oil Cooler Kit". s19.directupload.net/images/191026/vbdik3ko.jpg Just save the money. When you are driving it cools the oil, but I never had high oil temperature problems when I was driving anyways. But when you are driving very slowly, in stop and go situations or at long traffic lights it doesn't help enough to keep the oil temperature at a decent level. So it works when I don't need it and it doesn't help (enough) when I need it.

[@randallperry6774]

You can buy those fans all day for about 30bucks.

[@dynademos]

yeah they are crap

[@Jimmy_Jim_Jim_1234]

Is yours in this video a 10 fin? Or a 6 fin?

[@dynademos]

10 row

[@Jimmy_Jim_Jim_1234]

@@dynademosThanks for the reply. I just ordered the 6 row side mount. Wish me luck 🤟

[@CarlosGarcia-ls4hn]

It's refreshing to see a young man not sporting those gangta tats all over, and actually being able to carry on a conversation, without all that ..."hey' y'all all.. you know...you know...." Just saying. And no I'm not gay, but I have been told I am "light in the loafers."

[@bigwu100]

That was weird.

[@infini1970]

Hows it going with this Jagg unit in 2021?

[@dynademos]

Been to much snow/ice/sand on the ground to ride here lately . 😔

[@infini1970]

@@dynademos Been a long time since the review though. Hows the system hold up over time? I'm thinking either the Jagg or Ultracool for my streetglide.

[@dynademos]

yeah it is holding up fine. if your going to get the model with the fan, I would go with Ultra cool just based of the design. The Jagg fan is cheap computer fan. Both will lower your oil temp, however the fan design on ultra cool looks superior.

[@infini1970]

@@dynademos Yeah I'd be getting the bigger model the fit front not on the crash bars. My bike was upgraded from a 96ci to a screamin eagle 103ci blah blah. It's cool but get way too hot for sure in traffic.

[@dynademos]

I couldn’t get that one, it wouldn’t fit on the chin of my bike bc of my front stabilizer

[@Dr0BoI]

Wats the fan plug into?

[@dynademos]

a harness that comes with the kit. plugs into the canbis connector. we have an install video.

[@straightedgecutz8500]

i feel like its kind of a gimmick, Legos tune couldve been the reason he was running hotter and im not sure 20 degrees would make much of a difference regardless.

[@dynademos]

Bryant Zapien thanks for the comment. Perhaps your right that 20 degrees doesn’t make tons of difference on you engine short term. however i believe 20 degrees over thousands of miles may make a difference long term. Especially depending on what oil your running and how many ponies/ cubes you have. A tune if anything would make your engine run cooler and more efficient by dialing in the A/F mixture. 20 degree oil temp will reduce engine temp and feel better on your nuts and legs if your stuck in traffic.

[@straightedgecutz8500]

@@dynademos That's definitely a valid point it would be awesome if these companies did the research to prove they have a good product like some lab testings with a regular engine vs an oil cooler engine. A tune could go either way

[@dynademos]

Bryant Zapien exactly

[@jasonsanderson9385]

@@dynademos I have a FXDB 2013 bought Jag oil cooler without fan, last summer lowered temp slightly..... Looking to add a fan, any suggestions on buying aftermarket fan & mounting bracket? Not trying to spend a fortune on fan... Unless it's going to last. I had bought 2 fans both broke from vibration I'm assuming(fans that mouth where horn goes). Thanks in advance

[@bigwu100]

Just keep repeating yourself for the slow kids. Fan broke. Got it. I think its too small to do much.

[@d.sandell2555]

Jagg needs to switch to more robust fans to say the least..

[@davidfellows6250]

Here's what I dont get. A jag oil cooler is 500$ . I can get a 10 fin good looking oil cooler and a 12volt fan for 50 $ blue or black anodized. Why do you people pay so much for shit " that is for your Harley" I guarantee it's not one bit better and it's ten time as much.

[@dynademos]

Make it and send us a pic of it functioning no leaks

[@davidfellows6250]

@@dynademos you want me to show you how to tighten a hose clamp. I'm old,we built all our bikes,never needed a " kit" for nothing and my 70 shovelhead is still on the road all 117 cubes of it. Now I have a 2014 roadking a want to be of the 70. I decided to change the cam plate and oil pump and upgrade the oil cooler. I'll need your money to do that. Its fucking ridiculous at the costs to make a engine that Harley should have. Look around use your ingenuity, that is to say if you have any. Look in the automotive store and you'll find the cooler,hose,clamps and 12v motor .put it together right and it won't leak.

[@dynademos]

@@davidfellows6250 talk is cheap

[@davidfellows6250]

@@dynademos well then you consider me all talk.

[@Heavy69Metal]

Now is this done into the engine or like the stock oil cooler and only does the heads?

[@Heavy69Metal]

Is that the 10 or slim 6

[@Heavy69Metal]

Now is this done into the engine or like the stock oil cooler and only does the heads?

[@dynademos]

it’s like stock and it’s a 10 row.

[@Heavy69Metal]

@@dynademos how much cooler did it make your ride degree wise vs the stock with fan assistance?