Janome Machine Series: Memory Craft 6650 Sewing Tips & Tricks

[@blueyzdeb5255]

My 6650 gets here tomorrow. I can't wait. Thank you for the lesson.

[@debraewing2859]

This is one of the most interesting and thorough introductions to a Janome machine I've seen yet! I teach Machine Intro at our local sewing machine center - for all who purchase new machines from us. I plan to incorporate some of your fun tips and tricks! Thank you!🎉

[@BubbasChibi]

Thank you for this very concise and informative tutorial. I ordered this machine last evening and can't wait for it to arrive. And with your help, I know I will get off to a great start in my new "relationship".

[@kathiyu7007]

Thank you. I have had my machine for several years, and wanted to make a quilt label for the first time. I like that I could look up the chapter and not have to watch the whole thing. I appreciate my MC6650. Just wish the walking foot came with the machine.

[@allenring490]

How did you look up a chapter on the video??? I am not great at find things )-: LOL I just scrolled down and found the chapters! Thank you for your comment or I wouldn't have seen it. (-:

[@lisawalters5482]

Very good review and tutorial. Tfs.

[@jewelbriard5444]

needle is leaving big needle holes around stitching on label

[@wilycat5290]

Extension table? Walking foot? Nice demonstration. Thanks for the video 😊

[@sdlepal]

I just got my new mc6650 and as I come to a stop with my sewing it makes a grinding noise. I'm concerned something is wrong with it. I have re-threaded several times, changed the bobbin several times and it is the same. It doesn't do it every time but often. The stitching is pretty and doesn't seem affected. Any help would be appreciated.

[@deakhabarovsk6952]

I've had some trouble with trying to sew a decorative stitch (specifically 168) and everytime I would start the stitch it'll start to get tangled up in the bobbin and will get stuck after about 2 - 3 stitches. I've made sure I'm using the correct settings and foot but I'm a bit confused as to why it's doing this. Any advice would be appreciated.

[@karlaschnell7713]

I cannot get the needle threader to work to save my life. The one on my Juki has never failed me. Ugh!

[@larisavomacka6014]

I just received my 6650 machine and I have tried many times to use the needle threader. I used different thread followed each step and still the thread did not thread the needle. Ant tips on this would be appreciated.

[@janomelife]

Larisa Vomacka hi Larissa, Did you do needle up down to make sure the needle is in the correct position for threading? Is the thread right over to the the left in the guide above the needle? And I assume you are not trying to thread a small needle with a tiny eye? ( size 70 needles are tricky to thread depending on what thread you are using). If you try these suggestions and it still won’t thread, you may have bent the little hook which catches the thread to take it through the needle. That can happen if you do not have the needle in the correct position for threading. ALWAYS use needle up down first before threading. Not the flywheel as you still may have it in the wrong position. If the hook is bent, you would have to ask a Janome dealer to get you a new one and install it for you although it is quite easy to do. Did you buy from a dealer or the Shopping channel? Liz Janome Canada Education Dept.

[@dianamckay527]

Awesome

[@KellieMcRaeHurricaneInHeels]

I just ordered this machine today, I love making handbags and my current machine hates me for the paces I put it through. Thank you for showing me all the cool things this machine does and helping to solidify that my purchase was a good one.

[@terriesa9883]

Kellie, are you happy with it? I just ordered one today and i am worried about my decision.

[@KellieMcRaeHurricaneInHeels]

@@terriesa9883 Honestly, I'm a little disappointed because I got it home and a sensor was off-kilter, sent it to the shop, they fixed it, brought it home in the car (a 7-minute ride) and again the sensor was off. They had to come get it and bring it back to me. I'm just now starting to use it. It seems to be quite sensitive. I am now paranoid about moving it at all. So it was a good 3 week before I could even use it.

[@CMBecnel1998]

Can the AcuFeed feet be used on this?!

[@janomelife]

The 6650 uses the Superior Feed System and isn't compatible with the AcuFeed system.

[@arleneemrick2794]

Will the High performance play from the 6700 janome fit this machine

[@MrToms427]

my wifw has a 18 year old 6600 and is considering the 6650. She is a quilter and wants the dual feed deis that fits to the foot. Does this come with the machine or is an option? thanks

[@deborahmilton4776]

In the MC6650 guidebook, for free-motion quilting it says: CAUTION: Do not move the quilt layers toward you when the open toe foot is attached. Anyone know why?

[@janomelife]

Yes, the open toe foot has that opening at the front so if you move the quilt sandwich towards you, there is nothing to hold the thread within the foot. If you use a closed toe foot, this won’t happen and you can move the fabric in any direction.

[@pamelathornhill8650]

I was going through messages on here looking for someone that used their machine for quilting. What do you think about your Janome, and do you quilt queen size quilts with your machine?

[@KDolan]

I notice you lock the stitch at the end of a sewing line. Is there a reason why you don't do this at the beginning of sewing your line? Does it automatically lock the beginning of your stitching?

[@migdiol27]

Me gustaría comprar ésta máquina pero no sé si en Puerto Rico tienen servicio para ella

[@susanwilson5101]

Thank u great video I’m trying to figure out what machine I want I love the skyline s5 but I want a bigger throat area and most that have a big throat are just a lil to much for me I really enjoyed your video thanks again. If you have any advice please feel free to write me back. Have a good one

[@janomelife]

It's a hard balance to find all the things you want/need in a machine in the price range you need. We suggest contacting your local Janome Canada dealer and having a chat with them. Sometimes they have deals or previous owned machines that will be exactly what you need. Happy Sewing!

[@susanwilson5101]

I bought the 9450 janome I was making a bag and i used inform there were a couple of times that my needle got stuck did I make a mistake buying this machine is the motor not strong enough for my needs?

[@JulieCarrierStudio]

When sewing free motion does this machine keep the stitch perfect even if you move the fabric too fast or slow??

[@janomelife]

The MC6650 does not have a stitch regulator. We have other Janome models which do. So the even/ same size stitching is determined by the way you move the quilt, yes. Fast: your stitches will be larger, slowly: the stitches will be smaller. Having the speed of the machine set at the "sweet spot" helps a lot. For example, I can set the speed much faster for stippling but I have to slow it down for feathers.

[@HuggableHound]

Hi there, I have a Skyline S3 and I can move my needle all the way to the left (0) and all the way to the right (7.0) does this machine also do that? Thanks!

[@janomelife]

Carole HuggableHound YES, it sure does. This Mc6650 actually has more features than the S3: it is a much bigger machine with 10 inches of space to the right of the needle ; more stitches which are 9mm wide ( wider than the 7mm on the S3) - to mention just 2 things.

[@calmingbeauty6253]

@@janomelife how does MC6650 compare to Skyline S5 featurewise and qualitywise? Which one is better?

[@morenamonge3705]

Hi . How many layers of fabric can you use?

[@janomelife]

Depends on what fabric ? Thickness ? Many people use this model to make bags and purses which have multiple layers of vinyl or cork and bag stiffening etc. it is a strong, powerful machine so will easily sew multiple layers with no issues. Always use the correct foot and needle.

[@morenamonge3705]

@@janomelife is it a good machine to make curtains or drapes?

[@janomelife]

Yes for sure.

[@morenamonge3705]

Ok thank you so much for the info.

[@ejshelby5460]

How heavy of the fabric cannot handle?

[@janomelife]

It can handle multiple layers of heavy fabric.

[@babszollak2512]

Thank you, this was helpful. It would have been nice to get a little more instruction on the markings on the bobbin plate (ie where was 1/4 and is there a scant 1/4 marking); threading the machine using both spools of thread (ie one threaded to sew and one for winding a bobbin & can you bigger cones of thread)'; a close up of the thread in the needle threader as I am unfamiliar with a threader; more information as to why you would use a different bobbin case (yellow or blue dot - never heard of this); more information about using the thread clipping feature (never had before, does it knot the thread for you or is it just clipping it off so it could unravel?).

[@PatriciaGilman-wj3km]

Wish I could afford this machine..

[@summertene]

Could you show how to put on that clear plastic round free motion sewing foot?

[@janomelife]

We actually offered a Janome Life blog post just yesterday on free motion: free motion flowers on the Janome M7. The free motion foot that Kim shows in that post (which includes a video) is very similar to what you have on the Mc6650. You can also look at the Janome Sewing Machines You Tube channel as they have many videos and I’m almost sure there will be some videos there showing the free motion foot.

[@pamelac7633]

How can I get a new Instructional DVD? Mine doesn't work in several different machines I've tried. Thanks.

[@janomelife]

Hi Pamela, You would need to ask the dealer where you purchased your Mc6650. Not all videos/ DVD’s use the same software to play and it could be that you don’t have the required software on the computers you have tried to open it on? It is unlikely that the DVD is defective but you can also approach Tech Support. Their email is [e-mail]. If it is a matter of having the correct software, they can advise you. Janome Canada Education.

[@jewelbriard5444]

They really should offer it on USB or a download file. Many people no longer have a dvd player

[@icreatestuff3610]

How much do the 6650 and 6700 differ. If I got the 6650 for free motion would it turn out as nice as I know 6700 has acufeed and the 6650 does not.

[@janomelife]

icreatestuff hi, The 6650 is very similar to the Mc6700P but with less features and feet. It is a price pointing matter. Free motion can be done on BOTH of these machines. Drop your feed dogs, attach the free motion foot and away you go. The Acufeed flex function is on the 6700P, not on the 6650. If you want to do walking foot quilting you would need to purchase a walking foot for the 6650. Walking door quilting is not the same as free motion as you are using the upper and lower feed dogs. For sure you can do quilting using a walking foot on the 6650, but just not using the Acufeed flex foot. Hope that helps explain the difference.

[@pamdeamer1581]

Is this a low shank or high shank machine?

[@janomelife]

The 6650 is a high shank machine. If the distance from the bottom of the presser foot is 1/2" it is low shank. If the distance is 1" or greater it is a high shank.

[@adefemialeji1899]

Please how Can I fix the thread

[@janomelife]

What issues are you having with the thread?

[@Justeenysmom]

I just got this machine. How do you wind the bobbin?

[@janomelife]

Michelle Stringer Did you watch the instructional DVD which comes with the MC6650? It will definitely show you on that how to wind a bobbin. This is also shown in the instruction manual. We did not necessarily repeat things like winding a bobbin in this video that are already shown elsewhere in materials which came with the machine.

[@calmingbeauty6253]

How does MC6650 compare to Skyline S5 featurewise and qualitywise? Which one is better?

[@lindaregehr7025]

needle threader is NOT WORKING. It would be helpful to have a more clear visual to help me identify what it is I'm doing wrong.

[@janomelife]

I'm sorry yours isn't working. Check out this video, maybe it will be a bit clearer for you. kzbin.info/www/bejne/mIPOhWediJ2Nbrs

[@sweetbushstudiochannel4606]

My wife just ordered this machine and it will be in the next few days. Great video thank you. I only have one question, is your accent from Kenosha? I told my wife you sound like you’re from Wisconsin (nothing wrong with that) 👍🏼

[@janomelife]

No, she is a Canadian!!

[@sweetbushstudiochannel4606]

@@janomelife it was our first time watching her we didn’t know!

[@NUSHATT]

Hello, is it good for sewing clothes ? I’m not interested in quilting. Or should I pick different one ?

[@janomelife]

Absolutely. It is not just a quilting machine. You can sew clothing. It has overcasting stitches, buttonholes and more. Very good all round machine.

[@Kimberlyjae3679]

@@janomelifeis it true you can’t do hems on pant leg and arm holes though?

[@SusanMcPartland]

What is the part # for the MC6650 knee lifter accessory? Thanks so much for all the helpful info.

[@janomelife]

Part # for knee lifter is 846417011

[@margaritadeluqueyepez4793]

Quiero q mi idioma sea en español compre una maquina de hesa

[@summertene]

Quilting foot

[@janomelife]

Are you asking a question about the quilting foot? Walking foot? 1/4 inch foot?

[@dorisclements1512]

It would be nice to show the buttons that you press to select the basting stitch, not the fabric. This video is about the machine not sewing

[@janomelife]

doris clements Hi Doris, our purpose in making this video was not to repeat information given in the instruction manual and DVD which come included with the machine. We rather wanted to highlight some machine features and give some project ideas for sewing with this machine.

[@terrychestnut9537]

the word "janome" is properly pronounced "Ja-Nom"