Sometimes, the standard workflow for creating a mold split is going nowhere. This video will show "unorthodox" ways to split the tooling very fast. As a piece of advice - learn Surfacing if you want to become a Pro.
Пікірлер: 49
@joker777ize4 жыл бұрын
Thank you for the techniques that you shared. This is an excellent tutorial.
@larbigueraiche67215 жыл бұрын
Thanks so much for sharing this useful video.
@mobile-tube1201 Жыл бұрын
wonderful job sir................
@tofo2 Жыл бұрын
To make a smooth transition on the cylindric hub you can make the 3D-spline tangent to surrounding split line elements. Create an split-line to split the surfaces of the "blades" and their fillets attaching to the hub but ignore the path on the hub. It will be split once you have a 3D spline. Then make a 3D-sketch on surface where you "convert entities" of the surrounding split line elements and set them "for construction". Then draw a 3D spline on hub surface and attach each end of the spline as "tangent" to the converted splitline elements. The 3D spline on the hub can now be used to split the hub surface. Once the surface has been split you can run a complete split line where you can now make the path use the split of the hub surface. When the split surface is now created using the split-line, the surface will be tangent as it crosses from hub to blade fillets and the split-plane becomes continuous and smooth.
@geertwijnhoven449 жыл бұрын
Very good example and a I like the way you explain everything.
@mpereztab11 жыл бұрын
Thanks for share. Exelent this demonstration.
@darkshiker9 жыл бұрын
thanks spiderman
@BUWANGUZIYUSUF10 жыл бұрын
Thank you so much! i believe this is just enough for me
@carmiethompson26763 жыл бұрын
1:25 You should always try to create fully-defined sketches. So when you're requested to change a feature or the customer makes the change, importing the revised part into the file will result in fewer corrupted commands, let's hope. Nothing is guaranteed. Regarding the part file: Always use a copy the customers file & archive the customers version. Delete any links & store in a customer archive file safe from any accidental associations. It never hurts to remined everybody of this procedure to save the Designer & their employer headaches later from 'difficult' customers. As for the part: I would've asked the customer to redesign the fins for an easier better parting line. Not just for subtractive machining but to simplify the geometry to reduce build time. Just a thought. Thanks for the video.
@chrisnewton67402 жыл бұрын
Yep, you could ask the customer to redesign the part to make it easier for you and they get the next cheapest competitor to do it for them, you'll never know. Agree with fully-defined sketches. I'd prefer to let engineers go who can't understand the importance of using fully-defined sketches. Just do it!
@TriMechVTTs9 жыл бұрын
Thanks Geert. This is very old video. Today I would do it slightly different.
@magmyk9 жыл бұрын
Javelin Technologies Inc. what would you change? Im struggeling with getting a nice parting surface on a much more complex propeller...
@michaelerwin74855 жыл бұрын
I could not find the copy body option. What this video doesn't show you is that when that feature was created, he selected "translate/rotate" option at the bottom of the move/copy menu to take you to a different menu that gives the option to copy shown here at 5:40. Great video overall! I was just confused about the lack of a copy option. SolidWorks needs to improve that feature.
@nicolasbenitezdi8 жыл бұрын
Great, thank you very much, very useful
@NimaRafibakhsh6 жыл бұрын
Very cool video
@arogelj7 жыл бұрын
Nice job!
@Amans-Amans5 жыл бұрын
very useful video...
@nonenone156193 жыл бұрын
Hello I am not sure but do you think if you made both sides of the cylinder taper the draft surface will sort out by using symmetry revolve cut ? and tracing your parting line from that middle plane that you created ?
@chrisconn564910 жыл бұрын
How is the center hole of the part represented in the mold? I don't see a part that represents it. Is it just drilled after the fact? I appreciate the video - I have a super strange shaped object and I will see If I can apply any of your techniques.
@akshayd2115 жыл бұрын
I have a question. How would one create a split for creating a cylindrical helical object? I want to mold just a normal helical cylinder.
@desekrt0r9 жыл бұрын
Great tutorial. I was not achieving a good result with parting surface by itself.
@TheZALIS11 жыл бұрын
Hi, is interezante your example, the problem is that I get, you could put the way you did the piece.
@APTLouis11 жыл бұрын
Skill excellent :)
@charbelyammine20416 жыл бұрын
Hello do you think you can show us how to mold a coil
@PatRatRocks8 жыл бұрын
Where is the Part II video mentioned in the video? If there is a better way could you please create and post an update?
@jeff703711 жыл бұрын
Thanks~~That's good~~Have you been using in PRO/E?
@2002usama6 жыл бұрын
i would like to thanks you so much ,can you pleas give me the file to make same steps .if it possible best regard
@sanjeev411789 жыл бұрын
hi, i want to how to make 4 cavity mold of single component, and how to add shrinkage of plastic material in component. waiting for your reply
@sethgecko19729 жыл бұрын
Send me your file and I will help you soon....
@kandasamyrajan4 жыл бұрын
Is it possible to upload the part file?
@skizz03612 жыл бұрын
Can u help me with a mold problem ?
@KarlKillers12 жыл бұрын
I wouldve created a joint face without sharp edges!
@MotorsportsX7 жыл бұрын
what if your "spline on surface" step has to span 3 or 4 surfaces?
@TriMechVTTs7 жыл бұрын
In theory it should work. Have you tried that?
@MotorsportsX7 жыл бұрын
Javelin Technologies Inc. According to sw help.. You have to do a unique spline on each surface and connect the tangent points, but when I try to connect those points it just errors out.