This Custom Gaming PC is absolutely beautiful!

Ever wish you had one of those super cool looking PCs? Well now you can!
Check out this build available at Origin PC - bit.ly/37vZUcY
Specs
Corsair 5000X - White Case w/Tempered Glass
AMD Ryzen 9 5950X 16-Core 3.4GHz (4.9GHz Max Boost)
ASUS ROG CROSSHAIR VIII HERO WiFi
64GB CORSAIR DOMINATOR PLATINUM - WHITE 3200MHz RGB (4x16GB)
Hydro X Stage I - White (Hardline)
Max - White QL 120 mm Fans (10 Fans)
NVIDIA 24GB GeForce RTX 3090
1TB Samsung 980 PRO PCIe NVMe M.2
2TB ORIGIN PC Approved Hard Drive
CORSAIR HX1200 PLATINUM
Get your JayzTwoCents Merch Here! - www.jayztwocents.com
○○○○○○ Items featured in this video available at Amazon ○○○○○○
► Amazon US - bit.ly/1meybOF
► Amazon UK - amzn.to/Zx813L
► Amazon Canada - amzn.to/1tl6vc6
••• Follow me on your favorite Social Media! •••
Facebook: / jayztwocents
Twitter: / jayztwocents
Instagram: / jayztwocents
SUBSCRIBE! bit.ly/sub2JayzTwoCents

[@preston749]

It’s around $7200 USD if anyone was wondering.

[@B10HAZARD.]

😲

[@JayJoeVid4EVER]

Bruh my APU build cost like 560 bucks 💀💀💀

[@EmesiS]

Wow.....insane.

[@barrylinkiewich9688]

With wonky ass crooked pipes.... they should be ashamed.

[@seanthiar]

For that price I would expect perfect angles and parallel tubing. When you got a build like that you look at it every day while working/gaming with the system and I would go crazy to see daily that imperfection and then thinking of the price. But me buying such a system would never happen even if I got the money - I abhor RGB. It's so distracting when working with images. I even put tape over power/status LED's.

[@MistakenMedia087]

I'm just glad you said something about the tubes. That might drive me nuts.

[@kevina2052]

If I were the paying customer, that honestly wouldn't fly..

[@HappyDude1]

Indeed the tubes look awfull And I taught my tubes are bad 😅 This is my first watercooled PC kzbin.info/www/bejne/rWGVZ4KggtaWbsk

[@ohwell2790]

If that would drive you nuts and are complaining about tubing not being vertical is childish. And this video is not about performance but looks ?????????????????????????

[@MistedMind]

@@ohwell2790 By your logic people wouldn't be allowed to complain / discuss the looks of cars either, only the raw horsepower, torque etc...

[@NaterNorris]

Those tubes man, if I paid that much for a PC it had better be pretty much perfect

[@rishit1939]

me: re-doing the same tubing 4 times because the tube is not straight origin: who cares lol

[@infernus6278]

and thats the one they knew it will be on youtube, lame

[@NightVisionOfficial]

@@infernus6278 nope, it's a plus, cause if they ship better pc to reviewers, means they just want you to see they do things right, but then you might receive a bad tube, and maybe scratched. Doing this you know what you will likely to receive

[@edgarsnezinu1439]

Yeah tubes are not in level first what i notice but anyway build looks good except GPU connectors zzZzzZz

[@zacka7336]

Me: Wow, this looks perfect! Jay: This can be improved.. Me: This can be improved..

[@petervansan1054]

perfect? That tubing was god awful...

[@nathanoostdijk5580]

@@petervansan1054 yup. absolutely horrible.

[@bartomiejpopielarz8283]

@@nathanoostdijk5580 Me: looks at my Noctua NHD15 and its brown-beige fans taking half of the motherboard. Me: "Absolutely horrible. These tubes are whole 2 degrees off."

[@tobeynegsyourfavoriteverse]

@@bartomiejpopielarz8283 I love to stare at a nh d15 (chromax and the better looking one) I don’t know why tell me

[@Cornell90]

hahaha perfect comment

[@Airdown]

I've never done a hard-line loop, or any loop really, but those tubing angles..... bother me.

[@Travenport]

Yeah almost looks like laziness

[@thomasdarby6084]

I was thinking the same thing. If they wanted to make it really look "Pro," they would have cut and formed water lines to the reservoir and to the graphics card to make them conform to the anglularity of the parts. This looks great on the surface, but you can definitely tell it was not a custom hand-built gaming PC put together lovingly by a hobbyist, but by a system builder who SPONSORED the video. Question, Jay: If we can't get graphics cards and other PC parts right now, how did Origin get them?

[@mlrodgaming8028]

Same here. But the tubing ruined that built.

[@MobiusCGI]

@@thomasdarby6084 it is my understanding that companies like Origin and other pre-built companies have contracts for GPS they can use in builds.

[@MobiusCGI]

GPUs

[@sdj33]

Imagine paying for this and the moment you open it up...the tubing isn't straight lol. One would think that's why you would buy a prebuilt like this.

[@ladycarmillasanguina]

I could never buy pre built.

[@Gfoke]

I wonder if origin told their builder that this one was going to the great Jayztwocents to get reviewed on youtube... I'm gonna say no.

[@jonsmith1914]

No rigid tubed system is ever perfect.

[@mikeford963]

@@jonsmith1914 unless the guy building it is a pipefitter who can do the math for the bends with tube diameter and wall thickness.

[@codertommy6883]

@@ladycarmillasanguina Prebuilts suck, especially Origin. Their stuff is just overpriced Corsair garbage. I bet the price increase of this PC is due to QL120s, "Premium" Corsair parts, and, somehow, improved cable management, which a lot of manufacturers set to cost more.

[@jaredlangdon7286]

Jay is absolutely right about the tubing. It's the first thing I noticed too, and it bugged me. If I bought a high-end PC from a supplier, I'd want those as close to perfect as they could be. Now, if the case had a lot more curvy accents and such, it wouldn't stand out so much, but this case is squares everywhere. Great video, I really wanna build something like this someday

[@MusicNerdMIDI]

I totally agree with the satisfaction of building your own PC. Not to mention that it also educates you on how PCs are constructed, and how each part works/interacts with each other.

[@omarsyed1980]

If I'm paying premium for a pre-built rigid tube wc system, I expect premium attention to detail. So yes, fix the tubes.

[@Craig-ib7gk]

No doubt. I don't necessarily think sponsoring this video, and more importantly that build, is going to flesh out the way Origin expects it would. You already know they pimped this thing hard because it was going to be viewed by a million subscribers, and it *still* turned out like that. 'Cause you know damn well Joe Nobody ain't getting that kinda love. If anything, this turns me *off* dumping money into a build from them; not on.

[@ShallowRavers2]

And use cablecombs.. and custom 12pin gpu powercable.

[@Defiant031636]

For the amount of money they charge for a PC like this I would expect the tubes and cabling to be run correctly, looks sloppy which is extra silly considering this is a media sample...

[@rip4real437]

Can't say I don't agree with that lol. Tubing & cable management should definitely be on par

[@TheJasonGordon]

With the frosted tubes, I would have went with a blue liquid (think Game of Thrones Ice King's eyes) to get that "ice water" effect. I think that would have looked really good.

[@RonJeremy514]

Too bad rgb liquid isn't a thing lmao

[@darkestpirate]

yes baba

[@exaltednomad2703]

@@RonJeremy514 bit late but technically it is ek's myst fog coolant

[@EP-ni6my]

Built my first custom loop after watching many videos including this one. Mine is mostly the same components as shown. I did use blue dye in the liquid and think it looks great with the frosted tubes. One thing I found was that since you can remove and rotate the Corsair CPU block cover, there was no need to do the diagonal bend done in the pre-built system. I also find it difficult to completely drain the system with two rads in this config (had to do a partial break down after finding LEDs in GPU block didn't work due to loose cable that needed to be reattached). I used the last input plug as a dedicated drain tube and drilled a hole in the bottom of my case and piped the drain to that hole. But it requires lifting and rotating case to get fluid out of the whole loop. Looking to find a 3-way valve (not a 3-way Y fitting) to add to the output tube of the pump. That would allow me to close off the reservoir and force air through the loop so it can be drained without gymnastics. I loved my old 1070 where I was able to use an EVGA Powerlink to move power cables out of sight. Wish all cards had the same capability or designed like that from the factory.

[@lazerlake]

If Jay was Fedex and we see what he does... Seeing Linus handle things makes me think he must have been UPS.

[@deluxesofa]

steve would be dhl speed but fedex cheap

[@Depl0rable10]

I work at FedEx currently, we get many PCs a day and I always feel bad dropping and throwing them but we have to lmao

[@darrenvail8726]

What was Timmy Joe then?

[@darrenvail8726]

@@Depl0rable10 Yeah it's like hold up, I forgot to throw that one!

[@SlimPickins_07]

FedEx is usually the company I get banged up stuff from, UPS has always been decent for us. USPS I think sends your stuff to a war zone before it gets to you though.

[@Justin_80]

It just doesn't look "Premium" with off angle tubing.

[@Aleph-Noll]

you can tell that if they could save a penny by making the tube ever so slightly shorter they took that option lol

[@crisnmaryfam7344]

@@Aleph-Noll yep thats exactly it, they only have so much time allotted to bend them and install before going to the next check list item. Rather than take the time and bend another tube because the first isnt right, as long as it dont leak, its good to go. Not to mention the cost of wasted tubes that worked but werent "perfect". Perfect just isnt a good economical business choice in that department. Im surprised its not just soft tubes and slapped together.

[@5theshortone]

@Chiwawaeye Gaming that pc is $6000+ if i was paying that much for a pc i would hope that the tubing is perfect or near perfect. the tubing looks very lazily done

[@pocketlint82]

They specifically sent this to Jay and even took the time to set his favorite colors but didn't bother to use a unit with straight tubes. When they knew it was going on camera. That's nuts

[@Aleph-Noll]

@@pocketlint82 if this is the best quality unit they got i feel bad for the people spending a ton in buying it

[@hotxrod_2290]

I can't wait to see the JTC version you were planning. Especially in comparison to this Origin build. I'm currently running a 4000D Airflow and love the amount of air my case moves. Temps are lovely. Awesome stuff ya'll!

[@Craig-ib7gk]

Seeing this Origin build just amps my appreciation and respect for just how well GGF Events builds water runs. His runs are f'ing flawless; he never settles for "eh... good enough". If you've not seen his stuff hit the search box on YT.

[@philberco]

I think you should still do it the build "your way". Show them what it could look like if they took the time properly bend those frosted tubes.

[@microtasker]

It would not be the first, nor last all white build he will do, for sure.

[@harounegourribi47]

Bend those prostitutes

[@alldreamsfalldown]

Jay: “Frosted tubes”. What I kept hearing: “Prostitutes”.

[@avatar-zf9sh]

Same here lol

[@terakahn]

And he loves them

[@IronmanV5]

Freudian slip?

[@NoFearWizz]

Thx now I can’t unhear it 😂

[@sationas]

And he really likes it 8:36

[@dkluempers]

I have built a number of my own PC's. But given the current market I think getting a system like this will probably be something I will be looking at. Thanks for doing this video, it gives me additional information to use in selecting a vendor and PC. Also, I could not agree more that there is just something fun about putting together a system and turning it on the first time and watching it boot up. Thanks again for the videos.

[@ThomasPrettyman01]

Jay the audio on this sounds really good. Your editor did a great job mastering it.

[@shoey80]

I'm not comfortable paying that much money for this setup and getting these crazy tube bends. I'd do that combo too if the parts were you know...

[@johnk194]

Correct these tubes are all wonky and not aligned

[@HappyDude1]

Indeed the tubes look awfull And I taught my tubes are bad 😅 This is my first watercooled PC kzbin.info/www/bejne/rWGVZ4KggtaWbsk

[@bucketofholes]

they sure didn’t cable manage mine that well.. the one i waited over three months for.... and they made me change cases three different times... due to ‘stock’ issues. i wanted the 5000x and got stuck with a 678 carbide instead (junk). then i received the PC, and they sent me a ‘shipped’ notice 8 days later! 😆

[@theangryaardvark3507]

They knew this would be all over the internet, and seen by millions, hence the cable management. Sad to hear about your case drama's, it's shit when you don't get what you paid for.

[@briangrant9942]

screw that I would of try to cancel my order

[@bucketofholes]

@@briangrant9942 i didn’t really have a choice... i needed a system pretty quickly for a project, and couldn’t find a 3080 anywhere... so i figured they could do it faster than ordering piece by piece. it was supposed to take a month and you have to pay up front! bullshit.

[@ryant2568]

Yea I imagine there is a big divide between what a customer gets and what a reviewer gets.

[@bucketofholes]

@@ryant2568 he got the 5000x... probably the one they told me was ‘out of stock’ lol

[@MyBeardBetter]

It's absolutely beautiful! It's nice to see a pre-build perform well out of the box.

[@nobodyislisting]

A pre-built is a term used for like a Dell or an HP computer, this is a custom build.

[@Nez136]

Very cool build. Love the white. I’m looking to put my 5900/3090 setup on water and this is giving me more of a push. Especially seeing the temps as compared to my AIO. Not even close!

[@miibrawler]

Imagine being able to afford any of origin’s PCs lmao

[@misterfrigginYUCK]

Imagine actually being able to buy a GPU.

[@prozoomy3588]

Well at this point a prebuilt is better due to getting the gpu you want unless you have a pc.. then well rip :(

[@squill1277]

The angle off the pump output is driving me crazy

[@jameslewis2635]

Yeah, it probably costs about as much as an RTX 3080 on Ebay.

[@prozoomy3588]

@@seamouse007 +1

[@MeechJacobs]

For what they charge for those rigs, that would've been repacked and sent back with a square to make sure it is returned correctly.

[@jafizzle95]

Lol that'd be kinda funny. You process a return on the rig and before sending it off you duct tape a square edge to one of the tubes, to send a message.

[@glenngenoway7990]

Really like the way this computer looks. I would love to own one just like this.

[@ethantaylor8370]

This is legit my dream pc. I've tried to get as close to this as I can with mine but wow. This is amazing. Plus I've never done water cooled customer build only ever done an aio :(.

[@ckatech]

"I know what I did as a FedEx Driver" Oh we know--receiving things with tire tread marks with "Do Not Bend" clearly marked on it

[@OdysseyOG]

those bends are junk for being done by a professional company with a mark up

[@woopwoop3924]

preach

[@I_SuperHiro_I]

Sad thing is they could sell a case full of flaming dog poop and a 3090 / 5950X and it’d sell.

[@janus3555]

I know 'cringe' is used a bit too often but that's precisely what I did when I saw the bends. It was difficult to look at and to know if I was someone who bought it and to sit there thinking, "I don't know how to fix this and I probably wont be able to or will want to return it". When it comes to stuff like this, it only reinforces my desire to learn how to do hard tubing because of how little I can count on a professional company to do it nowadays.

[@trash3570]

Don’t think I could do much better, but I’m not a pro lol

[@Distrusted_Citizen]

@@I_SuperHiro_I I won’t lie. I’d buy it.

[@megaglowz8540]

Ya,I built my first water-cooled system last year and had one slightly crooked tube in it. It was the first thing anybody saw who looked at it. It drove me nuts and after a month I had to redo it. That is too beautiful and eyecatching not to be closer to straight.

[@RideByNight]

That 5000X case was on my list of finalists. It's a great case. Ultimately I went for the Phanteks P500-A RGB.

[@cup_and_cone]

The hard tubing not being perfectly horizontal is driving my OCD crazy.

[@thealien_ali3382]

Same I like big hairy men poop holes

[@Cross2077]

I just built mine and my brother did my tubes. They arent straight and you can only notice at certain angles. 10/10 can confirm its irking.

[@TheRobstar1983]

And I always say that life is too short for cable management, I think a lot of people going crazy seeing my setup.😃

[@Dinocv10]

His face reaction when opening the box. “You got to be kidding me.”

[@abidlack1980]

Yep, great feeling of buying the parts, putting it all together, booting it up only to find out it fails to boot and you have to figure out why. I had that happen once and the motherboard had a voice output for faults and it said something about a boot failure due to cpu overclocking which was 100% incorrect. Turned out one of the ram sticks was bad, so I had to wait for a replacement. That was the one bad experience in building a pc. Every pc I built for myself since then has worked perfectly upon initial boot. I built my first pc back in 2001 and I never looked back. The thrill of taking individual components and turning them into a functional system is always an exciting experience.

[@devilmikey00]

I actually kind of love the double bend from the GPU to the CPU block. If they'd been consistent with that it might have overall looked much sexier.

[@mendomendo]

Like others have mentioned, the tubes got me too. For a build that expensive I would expect the rigid tubing to look perfect. The 2 tubes not being parallel did bother me more than the angled run by the pump (which isn't great).

[@PokèMyBalls]

Glad I'm not the only one that forgets random words.

[@joevk6274]

I not only do that, I also tend to call things by the wrong name. And not even similar words like Jay did when he said "surface" instead of "service". I'm talking completely different words. One day, I meant to say I was going to run to Drug Mart, but what came out of my mouth? Dollar World. Sometimes I don't even realize I did it until I see the weird look on the face of whoever I'm talking to. Then I have to ask "wait...what did I say?"

[@PokèMyBalls]

@@joevk6274 Damn, I at least realize it sounds weird. Go to a Dr >_>

[@joevk6274]

@@PokèMyBalls lol nah. Most of the time, I do realize I said the wrong thing right when I say it. It's only once in a while that I don't and get weird looks. It's inherited. My mom does the same thing.

[@lordi2009k]

@@joevk6274 totally know that feeling lol, sometimes its great seeing the look on a persons face when the wrong words come out. you ever tried getting someone to believe that they didn't hear what you said but what you was trying to say.

[@joevk6274]

@@lordi2009k my mom and I laugh about it. She has one of those exercise trampolines, and one day she asked dad (in the other room) to move it. But she said "Can you come move this excavator?" Dad, having learned to translate mom-speak over the course of 4 decades, walked into the room and moved the trampoline without even thinking about it.

[@tyrantdirector]

Love your content... I think you should totally do a white build, with the frosted tubes (to see how they may be different from the non-frosted to work with) and also do it better, because you can. :)

[@SafeNebula11644]

I am a big big fan of that color combo. The black, the white, and the vapor wave colors are all my favorite. A build after my own heart lol

[@Zumito]

I hope one day to have a pc like this obstacle: Argentina

[@tarun6101]

?

[@spidaman0112]

Lol

[@houseofmeditation8945]

I really LOLED

[@MegaManNeo]

Jay's silent reaction when getting off one of the wooden sides was hiliarious 🤣 As for the PC, I am more of a black case guy but if I were to have water cooling in my machine, I would probably just get a professional prebuild like this one.

[@ewardw6062]

Yeah that pc is sweet origin do live build streams awsome to watch people build with no worries to cost love it 😇

[@bm5k]

FInally, I've been looking around for someone who did/has a build that is following corsairs build guide. Now I have an idea what performance will look like with that cooling setup. Thanks jay!

[@costafilh0]

Good to know you love your pipes straight Jay! Good to know!

[@bacon_fat]

where his ends, mine bends

[@alexbarry1324]

Are you still planning on doing the 5000D airflow build? I've been really looking forward to it after your first video with the case

[@HuggieBear39]

Thank you! I have seen some PC snobs that look down on prebuilt PC owners. I am glad you are not one of those PC snobs. Some of us don't have the physical dexterity to build there rig. I have CP and there ain't no way I would be able to do a system like that. I can still remember having to call a buddy when I bought memory for my Packard Bell back in the day because after hours for trying I just could not do it.

[@adamgreen6467]

just started watching u this is the most allsome pc i have ever seen if i had the money i would buy this in a heart beat 🤩👍👍👍👍👍

[@Ragesauce]

I legit love the look of this PC I'd enjoy looking at it every day! ...Can I have it?

[@NickShabazz]

Jay, I’m glad you got that Spyderco out at the end. That tip down carry mess you started with was killing me. Let me know if you ever need knife advice!

[@AlphaXray]

Shabazz? Here!? Awesome. Just changed the scales on my bugout mini today haha.

[@barrylinkiewich9688]

I was wondering what the dollar store looking knife was, I'm glad I'm not the only one who was happy to see the roundhole come out.

[@uncledeadhead3674]

@Marley Ishaan you made my day thinking about how sad your life is thatthe only way you can make money is like this, and even responding to your own posts with ghost accounts, lol im sorry your life sucks so much.

[@Christopher-tp8gl]

@@uncledeadhead3674 Wrong! Its just a coincidence that both accounts joined Mar 6, 2021 and typed at the same time hehe xD

[@NickShabazz]

@@AlphaXray I am everywhere. And I’ve learned a bunch from Jay’s channel. Big fan!

[@msfortuknit]

That's so nice looking! White pc builds are growing on me! Thema fir the video man!

[@ezicross-x]

Thanks for making this video I just purchased one like this at least I know what am going to get when it comes

[@TheYGOArmy]

Thanks Jay. I now have a new vision of what my perfect PC looks like. This is absolutely stunning. Round of applause to Origin and corsair. The only thing I would have done different is used a rog strix white motherboard. 👍👍👍👍👍

[@zorsenothorse]

The empty NV Link connector always seems wasted when i look at cards, any way a small plug in item could be used to take power from GPU from NV Link connector to power it and have a read temp from power delivery / gpu with sensors, or maybe there is a way to pull data from temps / fan speed from NV Link connector so can have a cool little unit with display just sitting on side of card I know aorus master 30 series cards have a display on them for temps etc but that software that it goes with, it really sucks and doesn't work most of the time

[@guillaumejoop6437]

I think SLI/NV Link is data only, the device would need sata power. But yeah cool idea, highly doubt it would be possible without custom drivers but cool idea

[@casualbird7671]

Oh my, now that's quite a special toothless avatar, isn't it?

[@pogchamp4212]

i could just watch this pc all day it's so cleann

[@TidbitTek]

Amazing pc, love the white look. Always looks clean. Dream pc.

[@ActuallyDibs]

"One of the reasons why I don't sell systems is because I take too long to build one!" - What he should've said

[@ryderbartholomew]

Just finished building my first ever system thanks so much for your guides and overall help in the process. Now I just have to use UHD graphics until I can snag a new gpu for a decent price 😭

[@5-0ed]

I feel ur pain my laptop has a intel uhc 620 graphics and it feels like years waiting for my pc with the 3060 coming in lol

[@Bamfhammer]

@3:47, One of your best transitions yet Phil!

[@joshuanelson4819]

So beautiful. I'm crying!

[@Vertigo11]

$8000 isnt enough for straight tubes, thats the $10000 version.

[@riothero313]

Gotta hold something back for the upgrade options amirite?

[@GenerationAI2024]

Argh my OCD is hurting, those tubes are crooked!

[@soothingrelaxation5898]

ong bro shit is missing with me

[@blacksheep7576]

The tubes not being parallel may lot be visually appealing, but it improves the performance of the cooling system

[@anthonydavenport1841]

My nzxt starter pro will be here in a couple days, excited to see what pc gaming is all about!

[@happycurty5502]

*Me :SHUT UP AND TAKE MY MONEY!!! THIS THING CAN DO 8K!!! *Employee: Ummm No Sir it Cost $8k

[@RedBairnMedia]

You know... If Phil were ever to do a "how to shoot and edit B-Roll" video, I'd be on there like a miner on graphics card pallets.

[@garycooper4512]

Phil's got skilz.

[@michaelbishop3701]

That Origin build is sweet. First thing I noticed was the non symmetrical tubing. I have an HP Omen 17 gaming laptop. Intel i7 9750 H and Nvidia Geforce 1660 TI. Not much you can do with laptop graphics cards. But, it does a pretty good job when gaming. Always wanted to build my own, especially after I started watching your channel. I'm 66, retired, blind in one eye and live on $1300/mo. disability. So, that will probably never happen. I could sell my Harley to buy the parts, but that isn't going to happen either. But, hey I can watch you build them. Love your channel. Mixing high intelligence with a little bit of fun works well for you. Thanks for the content.

[@nathanstribrny3832]

Thanks for the Ryzen voltage logic explanation Jay.

[@JorgeSanchezKN]

"I'm trying to keep it upright. Pre-filled and what not." 1 min later * tips machine almost 90 degrees to remove bottom foam *

[@JimmyTheBear]

This is what the internet has become. People go into the comment section and describe what we just watched.

[@JorgeSanchezKN]

@@JimmyTheBear cry more.

[@JimmyTheBear]

@@JorgeSanchezKN sorry I offended you. I take it you do the same. Just go into the comment section and transcribe the video?

[@JorgeSanchezKN]

@@JimmyTheBear lol, look at you go, gotta love wanna be internet cops. Take your whining somewhere else Jim.

[@JimmyTheBear]

@@JorgeSanchezKN sorry I offended you, you offend really easy. My condolences.

[@katherinesilens2994]

This would drive me crazy. Listen Origin, if you're going to produce these you can get some mandrels and rack them in the correct spacing and bend them accurately in one go. Also get the proper minifit terminal for the power cable if you're going to use FEs.

[@TheOriginalFaxon]

Seriously, I'm legit surprised they didn't take that adapter and rewire the end themselves with their custom sleeved cables. That and the tubing not being straight are both driving me nuts lol. This is why I do custom builds myself!

[@arthurpendragon8192]

@@TheOriginalFaxon at least if you make a mistake you didn't have to pay an obscene amount for it.

[@chrisneill1245]

Should I ever be fortunate enough to afford one of these, I will for sure buy it. Beautiful is under worded my gosh. and Phil amazing B-roll you the man

[@arztje]

First thing I thought when I saw this build was "man, they need to get that tube hanging off the pump to sit vertically". Because of Jay I am now hyper-OCD about my 90-degree angles and perfect tube bends. I love the white theme - it looks fantastic.

[@rootntoot2215]

Makes me want to start a KZbin channel in the hopes of getting amazing beautiful pc's lol

[@tannercloyd966]

“Did I just say Advercate?!?” Proceeds to say Advercate multiple times 😂

[@JRtheTzar]

I bought my origin last June. Dropped about 3k on it. Full Corsair rig, it is absolutely beautiful and they have the best customer support.

[@sillioo3638]

my god is that build beautiful! Literally Ice in the tubes

[@valupackgaming7814]

Two things when I see this computer 1. "Schwing!" 2. "She will be mine. Oh, yes! She will be mine"

[@theconfusedllama]

Every time he says frosted tubes I think he’s saying prostitutes

[@rob1253]

You mean he isnt? 🤣

[@kokoro_nashi]

Jeez your profile pic

[@petenielsen6683]

@@kokoro_nashi Ya. The moths flying around my apartment are bad enough. Now I have house flies?

[@TheRealSwidi]

They look cold

[@cooleristadas]

Absolutely beautiful

[@bluexeyedxpassion]

Omg thats a gorgeous build. I want it.

[@flammerz1938]

POV: You already read the comments before he opens it and know that the tubing is messed up 😔

[@Dave-H]

Ha ha this is so true

[@dztv7]

0:49

[@nyghtzzz]

Hey corsair, if you're bored, send one of these to a broke guy. Jay has enough toys lol

[@proatmope8764]

Finally someone who reviews a hard line version of the liquid cooling. I feel like most people always get the soft tubing.

[@fubarace1027]

Love the color, especially the ram covers

[@falconthebird5582]

Someone is getting in trouble at Origin for that slanted tube.

[@TheJoel0096]

Which one?

[@falconthebird5582]

@@TheJoel0096 the one coming off (or into) the pump/res combo and the one along the top.

[@Spaitzo]

Redo the tubing the way you like it, and show them how its done.

[@frankmthompson]

How about just redoing it right to show them it can be done ......that looks horrible for a PC that costs that much.

[@Maladriel]

Jay didn´t disappointed. :D :D Love your unboxing shows. And that build - glorious!

[@ScapinforLife]

Hats off to Phil. That transition and clip was insane.

[@cmarting83]

The guy from Declassified Systems right here on youtube puts Origin to shame, that guy makes insane custom builds for clients with almost perfect loops every time.

[@RjTheTrigun]

I watch his systems often, does he ship to the us customers or only overseas?

[@AllDayBikes]

Just checked him out. Wow, first clip I see is him using a square, second is the finished process. Miles beyond this shit.

[@cmarting83]

@@RjTheTrigun not sure, I only watch his videos but he does have a Facebook page you can check just in case

[@deadchannel5933]

Other rich tech people: **fighting about which and what monitor with whatever refresh rate and bezel thickness and size with the whatever suited color vibrancy** Me: A monitor is a monitor!!

[@miketoreno9532]

Lmao

[@alexandertheweak6774]

That's me

[@MrVoid119]

😂😂

[@Mike0193Azul]

Oh wow that's gorgeous

[@bmwtruenorth]

I saw this video after the build you did, so the reveal was underwhelming lol. all those crooked tubes drives me nuts :P The one you put together was stellar.

[@BrianBBBB]

Sometimes I put the milk in first before the cereal

[@ryanle1293]

sometimes I put the cereal first before the bowl

[@BrianBBBB]

@@ryanle1293 hmm

[@AdamBoozer]

Fucking synth.

[@nate-ox5lw]

You are the devil

[@hopsys]

Noone: Jay: I wee'd on my dad's lap when I was 2

[@thealien_ali3382]

I put my willie in my laptop disk tray and I liked it and now it's pregnant

[@TitaniumTronic]

@@thealien_ali3382 wtf

[@mrtempertantrum]

@@thealien_ali3382 cool story, brah.

[@jeremybarber2837]

Simply gorgeous. The only thing I would add in is a little more blue, such a great looking rig though.

[@edm3184]

That's a gorgeous build- I find myself only liking water cooling in other people's systems. It just doesn't do anything for me after some bad experiences (looking at you Enermax TR4 water cooling) and only use air cooling these days.

[@nakata5452]

All white builds are getting almost as over done as o11 builds. I miss seeing bold contrasting colors in people's builds

[@kaldo_kaldo]

Make one

[@emoemi948]

@@kaldo_kaldo what’s with the hostility? lmfao tf

[@mrtempertantrum]

@@kaldo_kaldo with what, there are no parts. Chill. Pun intended.

[@kaldo_kaldo]

@@emoemi948 How is that hostile? Be the change you want to see in the world.

[@ChrisMDSmith79]

no RGB is the way to go

[@supervisedchaos]

18:00 yep just built my first pc most satisfying thing I think I've ever done... makes me want to switch up my trade... if the pc world wasn't so cutthroat not to mention current hardware availability, i would

[@chicagodog3171]

I want to learn electricity so I can understand how these machines work. I would love to work in the PC world as well, but yeah VERY competitive market.

[@fisherthegoat]

@@chicagodog3171 Studying something like electrical engineering wouldn't properly tell you all of the intricacies of how a PC operates, aside from like the power supply or something. There's actually a career path specifically called computer engineering where you would learn about the components of motherboards, GPUs, CPUs, etc, and what makes them tick.

[@joshuastalcup6887]

Frosted tubes are awesome, yeah the tubes are throwing me off. That cable management is tight.

[@rodrigopinchiari4027]

Awesome build!