SpaceX Starlink App 101 Tips, Tricks & Secrets

[@jcristina]

🚀 Dive into the SpaceX Starlink app with me as I reveal exclusive tips and tricks that will revolutionize your internet experience. From uncovering Easter eggs that will make you smile to advanced settings that can boost your connectivity, speed, and your families safety this video is your ultimate guide to mastering Starlink. Don't miss out on these game-changing secrets that 95% of users don't know-watch until the end to unlock the full potential of your Starlink service! Q: What are your thoughts? Q: Do you have any additional tips and tricks? Get 1 MONTH FREE Starlink service using my promo link when order new service or an additional kit: jcristina.com/starlink Shy? It's OK, please consider placing an emoji 🚀 in the comment area so I know you took the time to watch this video! Thanks in advance! Asus - amzn.to/49OZIVf MSI - amzn.to/3VQAwrC NETGEAR Nighthawk - amzn.to/40cAL1N Eero - amzn.to/41Qex8a Ubiquiti amzn.to/3qC554s NetGate amzn.to/3cXiTTv Peplink amzn.to/3OnTsHM UTT Router amzn.to/3nJBLaL TrendNET Router #1 amzn.to/3nVukx0 TrendNET Router #2 amzn.to/3IGxvm2 Small Battery Backup For Starlink - amzn.to/3ScbcrZ Get 1-Month FREE - Use My Starlink Referral jcristina.com/starlink Subscribe, Share, and Like if so inclined! Also, after watching, consider commenting! Can't wait to hear from you in the comments below this video! 1-Hour SpaceX Starlink Setup and Network Design Consultations are available at jcristina.com/product/1-hour-consultation Don't forget to join my Newsletter: jcristina.com/join Super Chats And All Channel Donations Are Warmly Welcome! Thank You! Get a massive discount with PureVPN by visiting jcristina.com/vpn I truly hope you enjoy the video and find value in it! If so, please consider Thumbs Up, Subscribe, and Becoming A Member Of The Channel! For Media & Business Relations Contact 📧 jcristina.com/contact Thank you for supporting the channel! Interested in any products that I personally use? Visit www.amazon.com/shop/jcristina or go to the bottom of this description for direct links. If you would like to get a FREE copy of the Prologue to "How To Create A Digital Fort Knox - Backing Up Your Digital Life" or one of my other FREE books, simply visit jcristina.com/books Consider subscribing to the channel, commenting below, and signing up for my newsletter at jcristina.com/join Interested in any products that I personally use? Visit www.amazon.com/shop/jcristina or go to the bottom of this description for direct links. Highlighted Starlink Hardware I Have Tested In The Past: [ Social Media & Additional Connections ] 📦 20% Off Everything jcristina.com - Code YT20 🆓 FREE eBook jcristina.com/ebook 🌒 Dark Moon Teas DarkMoonTeas.com 🎬 KZbin - kzbin.info 🔖 Twitter - twitter.com/JosephCristina 👀 Instagram - instagram.com/JosephCristina 👨‍💼 LinkedIn - www.linkedin.com/in/josephcristina 📖 Facebook - facebook.com/joseph.cristina 📰 Creative Discord Server - community.jcristina.com [ Equipment Used ] 💎 MB ] ASUS - PRIME X370-PRO ATX AM4 Motherboard - amzn.to/2rmR9LT 💎 CPU ] AMD - Ryzen 7 1700 3.0GHz 8-Core Processor - amzn.to/2pSCx4S 💎 GPU ] MSI - GeForce GTX 1070 8GB Video Card - amzn.to/2rndQ2o 💎 RAM ] Corsair - Vengeance LPX 32GB (2 x 16GB) DDR4-3000 - amzn.to/2qo8PIv 💎 DISPLAY ] Dell - UltraSharp 34” Curved Monitor - U3415W - amzn.to/2s6pvTs 💡 Video Lighting - amzn.to/2qrDOnH 🎬 Sony ZV-1 - amzn.to/3rFkfFj 🎬 Canon EOS R & Kit Lens - amzn.to/3lEZIC2 🎙 Electro-Voice RE-20 - amzn.to/37SoBQt 🎙 dbx 286s Compressor - amzn.to/39SLTYY The above are my Amazon affiliate links - if you purchase anything using the links above, you're supporting this channel at no additional cost to you! I appreciate your support!

[@schaubhunter]

This was an awesome video. I listened to the content and replayed many times to get the full value of what you were saying. Great job. I didn't know this existed until you put this video out. Thank you for all you have done with these information videos.

[@josephjohnrobles8074]

Excellent! It's very informative, keep it up JC. Your subscriber and watching here from the Philippines. Thanks!

[@donaldonuoha4268]

I always enjoy your detailed explanations here from Nigeria! Bravo JC!!

[@dannylsharp4714]

Best Starlink info channel on KZbin! Keep up the good work!

[@robertlefler9864]

Another Great Video Joe. Thanks for all the info you Provide!

[@CSF1034]

Keep up the good work JC!

[@kl3258]

Thank you for this excellent video! Easy to understand. Broken down slowly and precisely. You should be on elons payroll. Your content is valued and appreciated!!

[@AlphaCrucis]

Excellent video.

[@jcristina]

Thank you very much!

[@EricSolomon-op8ti]

VERY good video. Saw your “interview” on Ham Radio 2.0. I am one of your Crossover’s. Use Starlink w. & without Ham Radio equipment. Just got a Mini & working on Mini Enclosed Deployment System So you you just Flip a switch & connect. Love your channel. Keep up the Great work!! Also. Please do a seperate Lan video on hookup/use/etc to provide different routers for different age groups/uses. Many Many Many would benefit from that. 73 W4EPS

[@jcristina]

Welcome!!! So glad you are here!

[@dansanchez9906]

Great Info! Thanks

[@jcristina]

You bet!

[@garryhammond3117]

Great tips - Blessings Joe - Cheers!

[@jcristina]

Thanks for the support!🚀

[@oorozco-e380]

Your videos are super informative and easy to understand. I have a question that is completely off subject. Where did you get or better, where can I get a bronze pendant like yours.

[@richarddonovan4350]

I’ve been following your videos for quite a while and I find them all very informative. But, at least for me, this video is the best video you’ve produced. Thank you so much!

[@RiverRicci]

Thank you...😎

[@jcristina]

I’m glad it was helpful 😎.

[@Good.Glacier]

Good Stuff ❤

[@jcristina]

Thanks 🔥

[@lucvilleneuve7927]

That was great jc thanks for that info❤

[@jcristina]

🚀 Glad it was helpful!

[@johntaylor8776]

Thanks!

[@jcristina]

John. Thank you so much for your support and overwhelming kindness.

[@ChriswishWish]

Good job bro ❤

[@jcristina]

I appreciate it! 👍

[@mlevass1]

Great video I learned a lot and even changed some things. Thanks👍👍

[@jcristina]

🚀 So glad you found it helpful!

[@StephenWalker-j1s]

That was a GREAT video, I loved that run down of the StarLink App. Keep up the awesome videos and Happy New Year.

[@jcristina]

🚀🚀🚀 Thanks so much!!

[@JB-fh9rb]

I really appreciate these videos and you provide the perfect blend of technical and non-technical information (background)… I found using a third party mesh router (Amplifi) that putting the starlink router into “Bypass” mode helps improve my speeds quite a bit. I think there was some conflicts/collisions happening between the routers. Measurably better using Bypass mode

[@jcristina]

👍🏻👍🏻

[@chuck5558]

Great video! Learned a lot. 👍

[@jcristina]

Glad it was helpful!

[@johntaylor8776]

What better way to get the new year off to a great start by supporting your channel! BTW, thanks for the great information on Starlink. User since 2022.

[@eugenesnyder1009]

Ty JC again for the great info. I made 2 changes that made things better for my setup. You are awesome and wish I could support you more than I have. 😊😢

[@terylsmith2882]

Thanks JC, We just got our Starlink up and going here in CO. and this info on the APP was Great! I especially liked the part about {snow melt} and being in the Rocky Mnts. this is so helpful, Gotta say, the teleport to Mars on my app deserves a drink if ever we meet up!! Thanks Again Jay!

[@JoeR-HisServant]

Awesome information…thank you!!

[@danwiggins6947]

Thanks J 😊

[@jcristina]

You bet! 🚀🚀🚀

[@LordTimelord]

Good breakdown!

[@jcristina]

👍🏻👍🏻👍🏻

[@sambacon1815]

Great stuff!!

[@dpburns42]

Good video loaded with great info. I'm still rocking my gen1 standard from beta with no problems. Have a gen2 RV (paused) and a mini. Love the mini. Still learned a couple things from this video. Thank you.

[@Nooneyouknow1980]

Good video.

[@jcristina]

Glad you enjoyed it

[@tomedgar4375]

Just received my new mini this week. Very happy with it. Can I track how much data I’ve used in the app?

[@jcristina]

Absolutely.. It's in there under STATS I believe.

[@tomedgar4375]

@@jcristina Must have missed it, will look again.

[@jyrgeva]

Thanks a lot for your video! I got a lot of useful information, as I never interested about debug mode before. My Starlink was "landed in the Mars" immediately when I found that option :) . I did many steps parallel in app following your video and found out, that even we have here quite heavy snow in Estonia, Pärnu right now, it's works well. Visibility is not good at all. The national broadcaster urged people not to drive without a reason and to stay at home. Starlink dish work in automatic heat mode and is heating right now. 99,95% ping success, latency 29ms last 15 minutes, Power draw is 72W within heating mode, 22 devices and 2 mesh nodes at home right now. I have motorized, self adjusting, ver. 2 in use more than 2 years for now. And ... what can I say?! It works. You just gave to me with your video, more reasons to keep it in use and check a lot of more available data from Starlink app, if I have or wish to do it. Anyway, as I'm fan of SpaceX developments also, I feel good to pay for internet service to Elon Musk company and support with that a little his teams activities, than local telecom's.

[@jcristina]

👍🏻👍🏻👍🏻👍🏻👍🏻

[@godllub2008]

You can use bypass mode to upgrade the router and use the gen 3 router on the gen 2 setup

[@jcristina]

🚀

[@slackerdude1958]

Once enough of the soon-to-be-launcehd (fingers crossed) v3 (I'm guessing that's what the full-sized satellites will be called), start appearing over the part of Alaska where I find myself these days, I will migrate to Starlink for my Interwebs needs. Great video, thank you for the effort you put into these videos.

[@jimedmondson5893]

I live in East TX and rarely snows here, but like you I leave the heater in automatic mode. I was surprised to see it come on last week during during some severe weather when we got a little hail. I am not sure that it was really needed, but the dish surface must have got pretty cold. Also, I happened to see you when you guested on HamRadio2.0 - great show!

[@CallMeColtLLC]

My Gen2 recently failed because of a bad cable. Making it worse, it installed an update overnight & then died while installing the update so it completely bricked. Starlink sent me a Gen3 & everything needed for install at no cost. Gave me a month free on a loaner Gen2 kit a friend gave to me as well while I waited for everything to arrive.

[@BruceVelpone]

How much data waste is built into starlink? I am on the RV Starlink Std Gen 3. Was testing it last week and used 7.5gb sitting idle with only a few speedtests. Do speed tests use a lot of data?

[@johnfritz8009]

Ever since I put my Starlink router into bypass mode so that I can connect it to my Wi-Fi mesh my app cannot seem to connect to the Starlink router anymore. What do I need to do? Thank you.

[@ellistonmclean939]

The app only connects to the Starlink router

[@chuck5558]

Probably have to do a factory reset and do not put your Starlink into bypass mode when you reset your network. I am running a seperate mesh network for my security cameras on my Gen 2 Starlink and have no issues with either of them. I use the Starlink router separated into 2.4 and 5 GHz for the TV's, computers and phones and the mesh for the cameras and smart devices. Works fine and I can still use the app.

[@jcristina]

Yep.. That is one of the issues of BYPASS MODE.

[@jyrgeva]

You hve to reset your main router physically into factory settings by instructions below, depends of what gen. Starlink kit you have. This will reset your main router into factory setting and you can connect and configure as new one by your Phone Starlink app. Better is, to turn off your mesh router for that time at all and reset and setup it again as new one, later. I hope it will help you. With best regards! Factory Resetting Your Router Manually Gen 1 and 3 Routers Step 1: Locate the reset button. It will be on the back for gen 3 routers or on the bottom for gen 1 routers Step 2: Use a paperclip or small pin to press the reset button and hold it for 10 seconds Step 3: Wait for the router to reboot Step 4: Set up your network again using the Starlink app Step 5: Connect your devices and try loading a page to check the connection Gen 2 Routers Step 1: Unplug and plug the router back in 6 times, waiting 2-5 seconds before you plug the router back in each time Step 3: Wait for the router to reboot Step 4: Set up your network again using the Starlink app Step 5: Connect your devices and try loading a page to check the connection

[@randydutton1]

I can't get the Mars background, nor can I get power draw data. Why? My Software version is 12.17.2024

[@jcristina]

Very strange.

[@jyrgeva]

Do you have newer version of Starlink or ver.2 too? My app version is 2024.41.1 and it show me under advanced menu in app: Model Gen 2 Soft ver. 2024.12.09.mr43817 and I have on bottom of advanced menu -"Teleport Starlink to Mars" slide button

[@Fiscals_Organics]

An update to the gen 3 starlink dish would be highly beneficial for your ping , my avg is 25ms with a low of 15 and high of 32

[@jcristina]

Awesome!!!!

[@thejackhomestead8638]

❤❤❤❤

[@JoeR-HisServant]

What does your necklace represent?

[@johnkwolf]

At Christmas had snow coming down

[@jcristina]

Nice!!

[@TindogTravels]

If your in tilt mode and you pack up in the morning you have to set SL back to normal mode or the dish will not stow. Also to stow without the app unplugSL and plug it back in again and lay it face down on the ground. This is all for rv and caravans etc regards tindog travels fb yt

[@sagecoach]

This is a good show I will look at again, thank you. What happened to, plug and play? We have been to the Moon on that. AI will take care of me, right?

[@jcristina]

Of course. 😆

[@setorliguddah]

Joseph Joseph...you dont use adukt protection?😅😅😅😅

[@chinakilasiulapwa5588]

💯

[@jimpix8019]

Hey Joe🌀 Just a thought… You should do a set video in the style of ‘Max Headroom’ , the Digital talking head from the 1980’s For your first 3 minutes of ‘Housekeeping’… Then the real start to the video proper can begin afterwards unhindered. Showing you in normal mode. A fun visual well within your abilities for a man of your calibre. May the Horse be with you.🌀 🐴🐴🐴 Jim🌀 (-: :-)

[@arnoldsmith5754]

my older blu phone doesnt have enough features to have total control of my starlink apps but i found a tree cutting my speed down it will be gone soon

[@susancooper7701]

Did they finally get it to work with using a VPN? Tried years ago but had to abandon it. NO VPN use!

[@roberson607]

[@dlbrooks2658]

[@jcristina]

👍🏻

[@arthurlong442]

Although I am no longer user, I have friends who may want to move to StarLink...

[@jcristina]

👍🏻👍🏻

[@sagreene70]

[@patryn36]

Just so you know, on the browser version there is no thank you button anywhere.

[@jcristina]

Thank you!!

[@davidthacker4832]

🙀🤔👍

[@Travelers1357]

👍📡

[@AusyGreen]

🇦🇺👍🏽🍌🚀

[@jcristina]

🚀🚀🚀🚀

[@setorliguddah]

Joseph did actually replant the tree? You cannot be cutting down trees for starlink..not good for the 🌎..i am not happy and i anot even aneco worrier😊

[@tygerbyrn]

🛰️

[@jcristina]

🚀

[@mannyflorio8103]

I just unsubsidized to you because you seem to love elon and I can't stomach the guy. So see ya.

[@jcristina]

That’s funny Manny. Thanks for that. You’ve made my night. 😂

[@timhoneycutt1367]

See ya manny

[@alexpocs8649]

Bye bye timmy.​@@timhoneycutt1367

[@alexpocs8649]

Manny..get a grip, sorry for error tim.

[@MrAlan1906]

Dude…. Wow. You are going to have a long 4 years ahead of you 😂 Hang in there man.

[@JeremyByers-vy6zp]

I just got my Starlink Gen 3! Yeah!!! Now I'm waiting till Monday for the 75' Ethernet cable and my Mount on my awning and then I'll be set~~~ I cant wait!!!😁

[@jcristina]

Congrats!!

[@eugenesnyder1009]

Thanks!

[@jcristina]

Thank you so much for your support and kindness.

[@thejackhomestead8638]

❤❤❤❤

[@catherineoconnor4529]

🛰🚀🛸👽🍌

[@JK-zw8ec]

Thanks!

[@jcristina]

So very kind. Thank you for the support. 🎉🚀🚀🚀🎉

[@perryg1822]

Thanks!

[@jcristina]

Thank you so very much for your support. Many blessings.