JDM Wheel Restoration

[@d4a]

Barrel brothers guy is amazing on camera. Natural, to the point and funny! He could be a youtuber/ show host easily.

[@fila1445]

driving 4 answers are you looking for some jdm wheels for your mr2 ?

[@alisdairherd9501]

driving 4 answers needs a handle, wow premature didnt see the starwars refeeence - Rim Vader.

[@CHOPSZOOKER]

Yeah how good was he, a natural and funny! This was an awesome video guys, really enjoyed this one!

[@d4a]

I have found some wheels! They are not JDM, but they are really cool and period correct. There will be a video on them really soon.

[@Trotaaa]

I see a potential spin off!

[@leonham8105]

that guy needs his own show.......... I would watch no problems,

[@joethornton2828]

leon ham i agree. The dude is hilarious

[@kuyans3889]

Wheely knows his stuff.

[@ChristmasCrustacean1]

he's like Marty in 20 years

[@chancesq]

omg when that finger showed up LMAO

[@FunnyBus3rd]

I thought it was a post production edit

[@TheZmt325]

This was a much better video than i thought it would be. You guys have matured this channel into something seriously special.

[@AG-pm3tc]

the guys from the Barrel Bros are awesome!

[@JanBabiuchHall]

A G yeah yeah!

[@AG-pm3tc]

Jan Babiuch-Hall lol

[@femsology]

Marty: so this is a wheel...? Eliot: yeah yeah yeah yeah yeah....yeah

[@El_Chompo]

It's like those ridiculous court transcripts. Some things just look so ridiculous written down even though in person it's totally natural.

[@dergrossedonjuan]

Yeah, yeah. Yeah.

[@Propulus]

Ye ye yeah, yeah

[@CollectWithRyan]

Yeah Nah nah nah yeah yea mate yeah its a wheel

[@stevanz1]

You know you're in Australia when every 'yeah' has a different meaning.

[@kanjoracer4914]

Barrel Bros need a channel. I would definitely watch them

[@jblob5764]

The pointing finger prop was priceless

[@buca9696]

I think it was a nod to Japanese car shows.

[@Figureight]

Had a wheelgasm as soon as I saw their inventory.

[@Jayweasle_US]

eyyy my man, you gonna do a wheel mod now?

[@Figureight]

I feature a prominent wheel mod in most of my videos tbf

[@mulletman2078]

Figureight I didn't know you watched MCM.

[@Pineappleparty]

Fancy meeting you here! Kinda cool tbh.

[@電車でDick]

Figureight Figure8 waddup m8

[@thefunkilledu]

To everyone who doesn't wear a face shield during grinder/buffer operations: That bite at 21:36 ? Yeah, no face shield on, and he would have lost about four or five teeth, and likely stitches at the minimum, if not a fractured jaw. Marty was lucky there, because he had his proper PPE. That 12 dollar plastic sheet saved him what would have been around a thousand in the States.

[@derekyam1805]

i want to give you a thumbs up, but you're at 69. so i'm just going to say i gave you a thumbs (Y)

[@curtisss]

So if you know who Marcus Parks is, he got VERY lucky, no mask and the grinder caught his lip

[@mendeltomas]

And Marty is wearing a watch which could get caught in a bunch of places in the machinery. I love these guys, but too much stuff in this video is just bloody irresponsible. Sends the wrong message.

[@quillmaurer6563]

A thousand in the states? What healthcare do you have and how do you sign up for it? I'd expect it to be way more than that given our BS healthcare system! A thousand barely gets you in the door!

[@luuk3213]

@@quillmaurer6563 ask for an itemized bill

[@RyTrapp0]

@20:00 Marty - lose the fabric gloves around extremely powerful, high speed spinning machinery, that's a MAJOR safety no no. I know they're part of the brand, but the thin latex/neoprene gloves the shop guy was wearing will tear right off your hand, but the fabric ones will suck your arm(and the rest of your body) in should that lathe grab it. But, that out of the way, AWESOME piece! Great insight into a local business of CRAFTSMEN.

[@Garmoo5600]

RyTrapp0 to right mate i remember my introduction to power tools and equipment at tafe and they show picture of what happens when you dont wear proper ppe

[@basztiancooper]

also the way he looks away from his hands when he talked ,i was taught to either talk while still looking at what my hands were doing,or preferably to take my hands away from the work and then talk

[@evs251]

That has happened to me with similar gloves on. The gloves just ripped off of my hand

[@wobblysauce]

+

[@driftfreak31]

RyTrapp0 also no watches

[@Socalsayten6six6]

That pointing finger tho 😂

[@ekuapa]

Chris Ortega remind me of the old Best Motoring videos

[@AccAkut1987]

Reminded me of Colin Furze's pointy hand thingy. Or the same thing Bad Obsession Motorsport does

[@DailyDriver.]

Chris Ortega 🤣I thought it was just me

[@knutn]

It's from Monty Python. i.imgur.com/Vn4aXla.png

[@forevercomputing]

Not to point fingers....

[@WSO83]

40 Minute video? Yesssssssssssssssssssssssss! Thank you!

[@niallgartland8193]

Wayne I didn’t even realize the video was dat long and I’m just finished watching it 😂😂

[@theinnocentbuda]

same haha

[@bitkarek]

i didnt even realize its 40 min long!

[@somedude1119]

I think it's really cool that they were willing to film the process of restoring the wheels themselves. Made for a great video!! Keep it up MCM. We love you guys!

[@yessiryousir]

This type of episode is what makes MCM the best car show on KZbin! All the different things the random outsiders bring to the show (and usually become part of the show) is just unique af and sets MCM apart from the other Tubers working on cars! Keep kicking ass guys.

[@thelegokorean]

Idk why but I want to see Mark (the Barrel Bros. Owner) take over the MCM channel for a day and see how it turns out. I would watch it xD

[@icebreakertech]

So would I, great content :D

[@johngilroy4474]

I'd watch the hell outta that episode

[@AccAkut1987]

He pretty much did, those first 20 minutes were more than a day of work

will be the next spin of on mcmtv2

[@chasinlines4803]

Mark is hilarious

[@PBPeachy]

Oi!

[@chasinlines4803]

Andrew Peachy what

[@SuperSilvi1990]

Yeah yeah..... yeah yeah.......ye..... yeah yeah.

[@PBPeachy]

7:21

[@martinultimatevw3779]

That Oi! 😂😂

[@JordyValentine]

That bridgeport sounds so much nicer than AvE's haha

[@spoonnz]

He self proclaims that its "clapped out"

[@16vSciroccoboi]

Ave also has a loud vfd attached to his that this won't have

[@TheDreamHazard]

Came here to say this!

[@JordyValentine]

Lord Grease Earl of Maggot yeah, I just didnt realise how clapped out haha, sounds loose in comparison haha

[@RonnieRawdawg]

gold centers are timeless, they match everything

[@quillmaurer6563]

Totally agree. I have gold-center wheels on my VW Bug, they needed a full sandblast/repaint, debated going a different color. Polished silver? Match the body color? Contemplated all these options but decided I couldn't go wrong going back to gold.

[@jasepoag8930]

19:00 That polishing on the lathe makes me nervous. Seems like the the teeth on that chuck could catch a finger if you aren't being super careful.

[@NBSV1]

Jase Poag Its spinning fast enough they kick your finger out more than grab it it. Does hurt a bit and get your attention though.

[@jasepoag8930]

I suppose so. I can't imagine that passing any kind of work safety standards though.

[@janwintraken]

Jase Poag not with gloves on

[@jasepoag8930]

Gloves aren't going to prevent a finger from getting pulled in an mangled. Hell, loose fitting gloves might make it MORE likely to get pulled in.

[@janwintraken]

Jase Poag thats what i Was getting at. "i cant See that passing any Kind of safety guidelines" "Well certainly not if you have gloves on" My wording was kinda off...

[@st333n]

this wheel guy is funny as i love it when they dont mind showing off the process

[@PazmatiKz]

Its 3am, time to sleep. *mighty car mods pops up on feed* YEET MAYBE NOT.

[@JpCharisma]

same lol

[@Mezzarino]

YEET!

[@mightycarmods]

we usually upload in our afternoon, soz!

[@laidlawenterprises]

Feeling this. Ah well, I've got 6.5 hrs to sleep....

[@kennyknackers6084]

Mighty Car Mods just remind them the earth is round , and if we in Australia get all there alerts at 1 to 3 am too

[@ScottPC]

This is the part where the tyre guy goes and scratches it to shit...

[@Vasquezz28]

ThatGuyNamedScott. C my brother got style 5 BBS WHEELS FOR HIS E28 BMW. Took him hours to get rid of the black powder coat on the lip and to polish the lips and paint the face. Then all that work for the tire guy to scratch the lip and chip paint on the face when tightening the wheels

[@ScottPC]

Art Vandelay also use a socket so big that it scratches all the paint around the lug nuts..

[@claw-machinesNL]

Got new wheels yesterday and they murdered my black rims to primer now i need to fix them...

[@ThaMythbuster]

Yup. Granted I did paint mine with a rattlecan, but still. Only a tiny chip on the paint from the machine when I got new tires for the second time. Damn shame of you ask me since they're a rare version of sort-of common wheels, (OEM E36 M3 double-spokes, staggered, with "BMW MOTORSPORT" stamping, only available in that exact config in 1994-1995, later ones have no stamping) but my paintjob wasn't 100% anyway.

[@El_Chompo]

Mounting tires is the one time that you lose control over your car, almost everything else can be done yourself. I've watched videos and it *is* possible to mount tires yourself without a machine, and even balance them to some extent. It's extremely difficult though, you need large levers and a lot of weight and strength. It's just like how you do a bike tire but so much harder. And on big lo pro wheels I don't even know if it's possible by hand with levers.

[@X1XBlackbirdX1X]

“Yeah, yeah” -Bearded guy

[@DouglasThompson]

Add a couple more "yeah's" and we might be in the ballpark.

[@rabidrabbittt]

how many times were "yeah" said in this video?

[@blakek.7201]

Olav Nyheim too many

[@johndoeyop]

How many times was***

[@markoantonijevic5430]

yeah nah yeah

[@rabidrabbittt]

zzx probably, who cares about was/were, i feel it looks less retarded than there/their/they're.

[@afiqaFaT]

Some say Usher is still jealous till today..

[@MichaelGallagher97]

In this video Marty demonstrates the importance of PPE by getting smacked in the face by a wheel.

[@Mitch3343]

Michael Gallagher But did he lose an eye? Nope. So the glasses worked!

[@patmoloney2788]

This is one of the best videos you have done in years. Great work guys.

[@dahlmasen3084]

Pro tip: Dont take a drink everytime Eliot says yeah😂

[@jblob5764]

Dahlmasen lmao you start playing and 5 mins later youre out cold on the floor XD

[@dahlmasen3084]

J Blob LOL!😂😂

[@traderjoe9467]

Thank you for the lesson in offset! Love how the videos can be instructional, but still interesting. Keep it up because these vids are MAAAAAAAAAAD

[@mi16t]

Trader Joe wow... you know, there is this awesome thing called google.

[@traderjoe9467]

Yo i just enjoy watching them and how informative their videos, I don't know why you have to hate

[@MichaelTV44]

The pointer finger is a nice touch.

[@-DEATHSTROKE]

Mark was born for KZbin car vids. Thumbs up to mark 👍

[@sourabhsharma7939]

I liked the video before watching it.

[@rrchicken117]

Sourabh Sharma "I'm a sheep, guy's look at me"- You

[@thatdriftingguy5027]

Same

[@mightycarmods]

thanks!

[@jovo21]

Sourabh Sharma i always do

[@_on_earth_]

I always do that when a certain channel always makes good videos

[@brokensilvia2996]

Pépite is french for nugget

[@janvio]

"Pépite d'or" is the word for gold nuggets. Or for other small bits of things, like "pépites de chocolat" for "chocolate chips". For chicken nuggets we say "Nuggets de poulet". For cars which doesn't work properly we have some funky words like "chignole", "bouzin", "charette" but "merguez" is probably the most appropriate ;)

[@kenay1989]

You're a Pépite

[@nathanbergeron25]

its not nuggets de poulet its croquette de poulet eh

[@nathanbergeron25]

also here in french part of canada a cheap old car is called also a taco or bazou

[@janvio]

Yeap Croquette is even better ;) We know you are a bit touchy with english-french crossovers over there :D

[@4DIYers]

Didn't expect that polisher to grab the lip so quickly! Hard to believe they're the same wheels, definitely worth the investment.

[@THOMASTTWYFORD]

That was a really great video! Not too fast paced and the quirky owner of Barrel Bros was funny too! Nice to see/hear just general conversation regarding a quite specialised topic, it really makes learning/watching very relatable. Nice one guys!

[@floflospeed24]

* Getting ready for work * * Notification comes up. * "38 min video. Has to go to work in 40 min. Thanks, Jesus. " :D

[@worldofrandometry6912]

I dread to think how much that work would cost. What an awesome job though.

[@veganpotterthevegan]

World of Randometry ha, 5-7x the value of the wheels!!!

[@DrRyan82994]

Every hour of labor is probably worth the whole wheel

[@Dethecus0]

To buy a set identical to that from Barrel Bros is ~$2000AUD give or take a few hundred to give you an idea. Refurbished but not widened are significantly cheaper than that. Check out their FB page where they post their stock and prices.

[@rafaelmarques5186]

Most likely nothing ... they showed their shop, talked to the people, most likely a sponsor episode thing.

[@StephenButlerOne]

Dethecus0 2k seems a decent deal to create your ideal wheel. I don't think I'd spend 2k on wheels for the mira, but non the less I thought they would be about twice that.

[@kfklspy]

Shout to elliot .... what a worker a real craftsman....

[@anvilworkshop3328]

Spyzola yeah! Yeah-yeah-yeah! Yeah!

[@boomchukalukaboom1856]

yea yea yea

[@fujitsubo3323]

yeah yeah yeah yeah yeah

[@joshsmith4488]

That it's one of the most interesting videos I've seen in a long time. It really shows you how much goes in to restoring a set of wheels. You start to appreciate and understand the pricing that goes in to that much craftsmanship.

[@phallus36]

This format of making a long video of a whole process is much better than lots of parts where not all that much happens

[@lx1402]

He doesnt even know he's hilarious with his pointer haha

[@jackassdude2010]

“Why do you bring me junk martin?” I lost it laughing 😂

[@crazymutha25]

"PPE's are often overlooked because they take time to put on, but can save you from a trip to the hospital" Meanwhile, on Roadkill...

[@clubsport9334]

Can I just say one thing I think we all take for granted is the epic soundtrack that the boys create that always compliments the pace of the episode. Makes me wanna double drop a coupla white Mitsubishi's.

[@jasonalmont7572]

My daughter got me the book for Fathers Day. Autographed and with some stickers thrown in. Top gift of all time.

[@williamzimmerman2671]

Need to have the older guy on more. He was awesome.

[@DG_427]

James Bond effect is fender flares.

[@skuz34]

thank you sir, you are truly doing gods work

[@clubsport9334]

Deadset legend. Thank you Sir.

[@Stizzer323]

I remember now. I was trying to figure out what it was. Them LED fenders were a work of art.

[@robertcorcoran1497]

Good man, i repeat... good man

[@Triple259772]

Thanks, all I could think of when they said James Bond is the old Marty appreciation thread of him being photo shopped on to James bond’s body

[@Wabeeninc]

My favourite Ausises Will you ever twin turbo the Barra and stroke it to 4.2l and call it the "420 Cressy"?

[@swiggityswootyimcominfodat7078]

Twin turbo is not necessarily better than single turbo.

[@swiggityswootyimcominfodat7078]

Jorn Navarre a single turbo also delivers a more linear power curve, since there is no interruption from a different turbo. A Stock R34 Skyline has parallel twin turbos, rx7 and supra have sequential twins, but those are stock, most of them upgrade those to a big single turbo, for lots of different reasons like maintenance, cost, drivability etc, besides, a twin turbo setup is often heavier and more complex, besides it creates more heat, there is less room for bigger turbos which Essentially means less power

[@dj4monie]

True but you can do a compound setup, you can also spray the F out of it and make a ton of power, either option works. But the problem is neither Marty or Moog can drive the car as it currently setup to it's full potential so they need to work on that first. Making power today is easy...

[@crowythebutcher6127]

Jemarc Quash Boxhill single turbo is better and the higher hp motors are usually de stroked to a 3.8 for higher revs

[@swiggityswootyimcominfodat7078]

Crowy The butcher destroke means less torque tho You can have a car that revs to 10k, but what's the point of it when it has the same Power as a Civic when it reaches 10k You need to utilize the powerband dude, shift at the right point so that your car has the most torque available when you shift

[@glassesmcgee4908]

The Guy from Barrel Brothers is awesome I think he may have missed his calling. I am really glad to see MCM put people on the show like this, Because so many shows do not give the time of day to the people that do a lot of the work in the back ground. Good on you MCM.

[@mistershoes548]

The Mira is my favorite project on the channel. So incredibly unique; this channel is the best place for car content!

[@MrSteeleFPV]

love your content !!

[@AimlessMoto]

Expert commercial placement... Marty gets whacked with a rim and BOOM commercial.

[@Mr_jz_12]

what commercial? :P

[@weareallbeingwatched4602]

@@Mr_jz_12 true, if he was running an adblocker his face would have been fine.

[@gustonegus9275]

I love the mira build its been a long road but worth the wait

[@paulinpelivideot2327]

Hey guys, right now I've been a car guy for almost 2 years, and it all started from the 180SX Mystery Dyno Run - video. I've gotten so much inspiration from you, motivation, and really helped me through the tough times. I'm also so glad that I've been accepted in the car community, and I've even gotten a friend through cars, and learned so much about cars because of you. Keep up the good work.

[@mjg7408]

Barrel Bros a complete natural on cam, sooo easy to watch and very enjoyable. Thanks

[@keith8900]

Love the longer episodes. Cheers gents.

[@ConfusedRaccoon]

This guy reminds me of my Dentist. Really enthusiastic and really sad about being brought stuff in bad condition.

[@El_Chompo]

It's because he genuinely cares so much about wheels, makes him sad to see them in poor condition.

[@milotin1978]

Why did you bring me Junk Martin ! - lol - wouldn't be MCM if it was schmick !

[@ronwalsh]

I ordered some stuff from your online store, and I was truly amazed that it took 12 days for me to get my shirt and stuff. Here in the States it can take far longer than this to get something shipped from Cali. Thanks for the amazing products, and my new t shirt is the ultimate panty dropper. Can't wait to see the wheels on the Mira.

[@lt7automotive931]

Marty, the zinc bolts are closer in metallurgical composition to the aluminum (aluminium). It seems that the stainless steel would be less reactive but it is further away in composition than zinc and will promote deterioration of the aluminum faster than galvanized (zinc coated) bolts. The wheels turned out beautiful. Glad you were open to the gold -- I think they look great with that color.

[@alexbennett997]

Big love for the Bridgeport #AvE

[@kmf1392]

Alex Bennett I immediately thought the same thing

[@smallenginedude71]

ol clapped out bridgeport

[@802Garage]

Same.

[@カナタ-o9x]

When is the mira going to be one color?

[@mightycarmods]

after it has wheels!

[@kazikzz9913]

So 4 years. Thx!

[@timothyrinaldi6609]

Mighty Car Mods why wheels will not fit as I am hearing impaired u guys do not have subtitles that why I can’t hear what u guys saying.

[@JayHaell]

Timothy Rinaldi - They didn't say. Guess we'll find out later :)

[@IsadoreWoW]

They probably made them too wide for standard body on purpose because they knew they were getting over fenders?

[@joegeldard1530]

Wheely good episode lads

[@jizzyg1559]

I guess everybody just rolled on with your joke

[@Reploidx9]

@@jizzyg1559 Just tyred of bad wordplay.

[@StudiousAsp7200]

Amazing video guys, always have wondered how dope JDM wheels come out so clean and the work that goes into them. A new appreciation for Barrel Brothers and others who restore wheels! :)

[@geoffygeoff9391]

I love watching and listening to guys like this. Super knowledgeable, super friendly and explain things really well so it's easy for mongs like me to understand.

[@cmoney6175]

*For some reason I wanna import a Mira now*

[@garystinten9339]

P. Cookie good luck.. If no luck. Look up a Ford Japan Festiva GTX.

[@jimlucas0]

im just getting an L200 Cuore for a few hundred

[@ickipoo]

For some reason, I wanna get some junky old alloy wheels rebuilt!

[@beanshooter5784]

25 year law here in the US. i could import a mira with zero legal hiccups. just imagine, if staya didnt have the laws they do, we wouldnt have all the mira episodes theyve put out up to this point. it would just be like "we imported our awd turbo mira, lets do some mods!

[@cmoney6175]

Bean Shooter *Yeah man I'm in the US too, Boston Ma to be exact lol. Potholes and a Mira may not be the greatest idea though 😂*

[@777warhero]

imagine curbing them right after all that work. Id be paranoid the whole time driving that car with such nice wheels

[@Connor312_]

Will it have led's for extra James bond effect?

[@christofferh1]

Stainless steel bolt in aluminium wheel will increase the corrosion in the wheel - that’s why you should have zinc bolts. (Easier to change bolts than the whole rim).

[@warmowed]

Mates I can hardly believe I've been watching you for nine years! almost a full decade! I found you when you posted the MCM Drift video at Oran park!

[@c.o.n.collectingofnostalgi889]

love the Monty Python style pointer

[@Ecosse57]

ha! someone else made the connection.

[@c.o.n.collectingofnostalgi889]

Ecosse57 "Ni"

[@adamdavis6481]

"In order to pass through these woods... You must find... A SHRUBBERRY!"

[@c.o.n.collectingofnostalgi889]

Adam Davis and another Shrubbery !

[@c.o.n.collectingofnostalgi889]

so who's bring the Herring to cut down the tree

[@CageyJ0nnY]

What a legend wheel guy Mark is!

[@thepartypotatopooper6354]

eyyy jamesbondaffect aka fender flares

[@Whatsthevibe69]

The potato Party pooper shh

[@Garmoo5600]

Duuude old school viewers only

[@Xantosh82]

back before people "Stanced" to get past overhang laws! Flares>stance anyday classicthrottleshop.com/wp-content/uploads/2017/09/1974-Holden-Torana-SLR5000-6.jpg

[@Banks4004]

they better be rgb

[@djbreal87]

I thoroughly enjoyed seeing the wheel guys do their thing. I know you guys send your stuff off often, it would be nice to get some more behind the scenes stuff when you are having custom stuff done up when possible.

[@Billy123bobzzz]

Amazing video! Very well executed, educational, interesting, informative and the Barrel Brothers are awesome, you should have them on your channel as often as possible, they make for a great team with you guys!

[@jimmierussells3904]

I considered watching this at work but figured I'd get in trouble, so I left early instead.

[@MrGarycharters]

Jimmie Russells that's awesome haha 😂

[@ZepolWorkzGarage]

What size are the tires and brand ? Wheels looking great can’t wait get some for my Rx7.

[@Grainblastphotography]

Zepol Workz hey bro, what wheels are these? I don’t think they mention it in the video and I’d love some for my mk1 mx5

[@ZepolWorkzGarage]

about_69_gingers I think they are SSR ?

[@DrRomero619]

Never use a lathe with gloves. That's how you lose fingers.

[@kawasjt]

Really love the collaboration in that video. It's nice to do things DIY but sometimes you have to let the pros do some work. Mark looks like he was born to explain stuff to people, he's a real natural in front of the camera

[@thubbs100]

I would ship my wheels across the world to let these guys do their work. Awesome video. One of the best MCM vids and I didn't expect to be that interested in a wheel resto. Friggen awesome.

[@Crimsonedge1]

Nugget = Pépite. Also, me telling you this is me giving you a "pépite de sagesse". (Nugget of wisdom)

[@chazhartwayne6493]

Talking about safety and then shows them using gloves at a lathe. Thats some real comedy.

[@scottmahoney4658]

James Bond effect means it's getting MAAD overfenders, this will be mint.

[@juankrajo3874]

Scott Mahoney thaaaaanks

[@God_Forger]

The injection of Barrel Brothers flavour into the video made an interesting change. It's also good to see how stoked Marty gets the closer the wheels are to being finished.

[@tcolby29]

Elliot is a true artist. His attention to detail seriously is intriguing.

[@gorkemakgul5531]

Will it fit my Honda?

[@mightycarmods]

Not in 4x110

[@turnip5465]

Mighty Car Mods will do in a 4x100.. All bout dat EK4 lyfe

[@Henchman1977]

Bridgeport milling machine! Ave shoutout!

[@shiftedstorm]

That moment when you were gonna go to sleep then mcm drops a vid

[@Slizzo82]

You guys found a legendary wheel place. Need more of these guys more often.

[@LUKELECTRIC]

Moog, I have to say that the music is getting better and better every season, this Jazzy-Chillout in this video is great!!!

[@authenticmax6350]

The wheel guy is cool and funny man.

[@lynnmckenney1987]

The James Bond effect is BAAAAAAAAAAAA-Aaaaaaaack!

[@brandonroberts73]

Nugget is french is: pépite

[@silveur9386]

"Nugget" in french is : pépite* I'm french too ;)

[@bingbong5939]

J’aurais dit croquette mais j’pense j’aime juste trop le poulet

[@silveur9386]

ça peut aussi marcher, mais la phrase est plus cohérente avec "pépite"

[@Nikdangove]

That was one of the BEST Episodes in awhile, Really enjoyed the indepth look into the process, and Ol'Mate at the wheel shop was pretty funny too.. Nice work.

[@jrwstudios]

I've honestly never considered wheel repair shops before in this detail. Thank you! Great episode

[@binbu9421]

The most amounts of yeah yeah yeah I've ever heard

[@AlexDub1318]

XD hahaha i was going to say something about that good thing I wasn't the only one that noticed

[@Archi2g]

It's perfect Australian English for me, there's a fine nuance to each Yeah which translates what he's thinking well.

[@barozanul2]

Efrain Bueso yeah

[@sinformant]

Honestly surprised with all the equipment they have that they don't have either an automated seam welder, or at least a turn table to turn the wheel as he welds. I know they exist because I've used one where I used to work. And they aren't expensive enough that they wouldn't be paid off in a weeks time with the time/labor they would save.

[@jacob.s3619]

sinformant lol I was thinking about a turn table for welding to while watching, then see they have a turn table for when painting them🤦🏻‍♂️

[@anderpendragon]

They need 2 turn tables (and a microphone, lol)

[@sinformant]

Ander Pendragon where it's at!

[@addiemonsterrc3990]

These guys clearly have a bit of an old-school, hands-on aesthetic and work ethic. I think the fact that they use vintage machinery and techniques in a lot of ways lends credibility to their services. Not that modernizing would hurt, but honestly I have no idea as an outsider watching a video on youtube about what their motivations are for having "outdated" equipment. As my old woodworking teacher would say of his 70's lathe - "If it still works as intended, it still works as intended."

[@veganpotterthevegan]

Adelle Blaire I think it's cool with pure fabrication. It's a waste of time for this though

[@Houyoo]

DO NOT WEAR GLOVES WHEN OPERATING MACHINERY! (especially tough gloves) It's really dangerous especially near mills, lathe, and grinders...

[@tinatpasselepoivre]

why? they can get stuck in it? Last time my grinders disk broke my glove protected me from the schrapnel...

[@Houyoo]

You could wear thinner gloves like Latex ones but when you are wearing something like Kevlar gloves, once the wheel/motor catches it, it will grab like no other. (by the way, I am talking about pedestal grinder / bench grinder) I know it is very convenient to wear gloves while using grinder since it seems like it will protect you from flying chips or getting cuts from sharp edges, but its really dangerous because of the reason I said above.

[@wolfy9005]

I've grinded all kinds of gloves, never had a pair get stuck. Same crowd that say synthetics are super-duper flammable, my melted polyester shirts from grinding sparks and hot tig filler rods makes baby OHS nazis cry

[@MudSlingar]

Not to mention watches and rings. Seeing Marty working with the watch that close to rotating parts was a bit of a pucker moment haha. There's some pretty gruesome pictures and videos of workplace incidents involving people getting caught up in a lathe. Just a whole lotta nope.

[@EngineeringAndRestoration]

I'm glad they included the near miss on the episode, it should convey the dangers of abrasive wheels. Rotating parts love to eat any loose clothing and gloves therefore should be respected, they will take as much of you as they can without mercy. The only time you should wear gloves when operating machinery is if your construction site mandates it, otherwise they are a hazard to yourself and those around you.

[@kennyg4744]

Marty - 30:18. My uncle was a cabinet maker with exceptional attention to detail. 30 years ago when I questioned, "but you will never see it", he fired back at me. Nobody sees your arse, but you still wipe it.

[@saywhat9158]

Those guys take extreme pride in their work and it shows nicely in the final product.