2007 Fatty Honda Ruckus on Air Ride. Walk around. diyruckus.net

[@BrandonRyanPresents]

Ive never once used the air ride for speedbumps. I always ride it with full compression. the only time it gets aired down is for parking. its simply "because i can" mod :)

[@BrandonRyanPresents]

This Ruckus has the Stock50cc motor. I have 6 Ruckus. Couple are GY6 but not this one.The headlight in this video is the kijima headlight. or "wave" headlight.

[@kachiskid]

You did the right thing in building this monster...very nice work my friend, very nice work!

[@SimpleGuyTai]

This is so sick! I saw I guy driving a 2012 model right from the factory and I was so surprised so

[@BrandonRyanPresents]

You can find them during the winter for about $1,000. Summer the usually sell for about $1500

[@ihelper252]

I recognized your bike from the beginning Brendan! Your bikes look sick as well as the met you built for you girl

[@BrandonRyanPresents]

about 3500-4000 depending on what parts you use (this price includes the price of the stock ruckus)

[@BrandonRyanPresents]

I have well (had) a 2008 Yamaha R1. not sure if you consider that a nice motorcycle. I found myself riding the ruckus more then the R1. So i sold the R1. I'll prob eventually get another super-bike, but i need to wait until i'm more mature and not as reckless.

[@TheMoDzNaTiiON]

Is it possible to have one that can be started up by keys? Does it HAVE to be registered just like a Motorcycle? Would it be easy to put a turbo on here by myself?

[@BrandonRyanPresents]

this video is over a year old. I have done some major improvements to the ruckus. Going to try to film/upload a new video. I can arrange to have her in the video more if you would like. lol

[@cubul32]

Hey Brandon, any idea if you can do the fat tire and big bore without stretching the wheelbase? I wanna have a phat, short moped, with a lot of power, for city and getting on the highway if needed. I suppose the seat would have to stay high as usual if it works? The 49inch wheelbase I would need that more for putting it behind the car. If I stretch it like yours, could you pump enough air to "fold the bike down to a 50ish base? Thanks for posting the cool video.

[@BrandonRyanPresents]

The problem you'll run into is that with a fat tire you'll need to offset the moter. once you do that the problem you will run into is it will hit the side of your rear frame. Yes you could do a mini stretch, something custom. However I'm pretty sure that's at least a 6in stretch to clear the rear frame

[@BrandonRyanPresents]

Just the stock motor on this Ruckus. wanted to stay true to the 50cc roots. I have a few other ruckus (5) one of them has a 170cc Gy6 swap :)

[@AlexisHerrera393]

Where do you get that air ride system?

[@nikhilshirke3293]

i had the same q?

[@RobTheJester]

You still have this? Wanna sell it to me? I'm in Vancouver.

[@arkadihughes4893]

"Hey babe, can you just stand by the bike while I take a video of it? The boys'll love it."

[@paulettebrown1872]

Now I been seeing a lot of other rucks and I'm just wondering why mines have 2 rear shocks and the ones that modded have 1

[@BrandonRyanPresents]

Do you have a real Honda ruckus or a iceberg or wherever the Chinese replicas are called.

[@paulettebrown1872]

@@BrandonRyanPresents I really think its the maddog version of the ruckus I'll check it in the morning and see what it says

[@jasonr9141]

Nice look n...does it move

[@andreisamuel2939]

Bom legal, porém sera que amortece alguma coisa? ??????? Pois sem ar abaixa a moto perde o amortecedor se colocar ar a moto sobre mas ficara duro ????

[@JuCCiPuCCi]

Hey seen this bike on nwp4life.com how much invested into the ruckus? Not with the price of bike? Sick bike btw, i seen you had it for sale.

[@llldAdAlll]

hello i just started looking on this kinda of bikes .. i would like to build one i dont really now nothing about ruckus ... if you can tell me where i can find info to star something like this. or if you can help me get started whit some info i really a apreciated plus your bike its so F GREAT!!!! NICE !!!

[@1000186ful]

Who makes your engine stand

[@chasfaggiano]

Do you own a garage or know someone that does in the portland area? Looking to work on my ruckus but I am new to the scene and would love to learn a little.

[@superdonkeyballs]

I'd like build one like this minus the air ride. Where's the best place to get parts?

[@BrandonRyanPresents]

I'll be filming a video of my other ruckus in a week. I'll take your comment into extreme consideration.

[@s13coupelove]

how do you start one of these lawnmowers?

[@jesussoto3971]

Where'd you buy the yellow lights for the wheels

[@richardwiley9606]

whqat was that at 0:41??

[@hurilo]

Hey man, I'm a Ruckus noob. Getting my first one in the next week. Is that a GY6 or a stock motor stretched with a fatty tire? Also, (sorry for slamming you with questions lol) What headlight are you using?

[@nickn7939]

did u ever get a ruckus brah?

[@joeyvodopija3315]

Nps 50 or gyc build ? Been searching for a video of a 50 with a stretch

[@BrandonRyanPresents]

Get 50. No guy. Just the OEM factory Honda ruckus motor

[@Tonybooker]

Weren't you at NHDRO last weekend on this??

[@aarongoodwin196]

That's a badass lawnmower

[@lanagreen596]

Can you send the link where you got your front pegs from?

[@BrandonRyanPresents]

I made them myself

[@skarphao7771]

very nice , how much you spent on this complete set up ? I'm starting to like ruckus and learning about it.

[@BrandonRyanPresents]

About 4k

[@miyulnews]

Why it's not available in Europe ?

[@antonino230207]

What brand and size is the crear tire please?

[@miguelcorrea6302]

Donde puedo comprar la caja de adelanté. La que va abajo del bolante

[@BrandonRyanPresents]

its off a dirt bike. i got it off ebay. dont remember what its for. yes its a yoshi. i had it cut and modified. cost about $525.00

[@brokencyde105]

how much do you have in that i want one really bad

[@richardwiley9606]

is this a cootert ?

[@BrandonRyanPresents]

They come with a push button start. but mine burnt up from the CDI.

[@Frankenbullet]

I’m interested in the build list

[@HondaFanUA]

Asking someone why mod a ruckus is like asking someone why collect some stupid post cards or why watch some tv show. People don't do it for profit, they do it for enjoyment. If there's one thing that doesn't have to logically make sense in life is how you have fun. So long as nobody gets hurt.

[@BrandonRyanPresents]

Just like the remote start and alarm plan to put on it next... Not needed, but why not :) I draw the line on the back up camera :)

[@paaulkeo4584]

What main jet / slow jet size are you using, with at Yoshimura exhaust ?!?!

[@Josh49546]

Is this or most 150cc stretch rickus' fuel injected?

[@vTwiiNz]

can you send a link where i could buy the air suspension kit. Looks Really Nice!

[@Tricyclthief]

What size bore and stroke is that on your cylinder?

[@KashimaRowan]

hi, im from new zealand, may i ask hows the market for ruckus in usa ? still going great or cooling down now?

[@BrandonRyanPresents]

it has slowed down allot. Id say the PEAK of the ruckus was 2012-2013

[@scorpionbull]

Bro can u tell me more about this build

[@andreisamuel2939]

Na minha moto isso acontece porem mantém a ação do amortecedor intacta já que o sobre e desse da minha moto não depende do amortecedor

[@pimpalero2003]

I'm waiting on my airline to come in and my swapped one will have it already have compressor smc valves and bimba cylinder. How does it ride at ride height though

[@Gothm_Batman]

Can you get bigger bigger wheels on that?

[@BrandonRyanPresents]

That's the biggest you can do 👍

[@BigHemiNJ]

Just found out about the Ruckus today, what is it called for like the extended wheel like is it a different frame or something?

[@Dsquarezz]

extended subframe

[@andrewhillis8530]

extended engine mount or a new gy6

[@yamaha04rider]

where do you get the parts to extend & lower the front and rear suspension?

[@kaimuzu8635]

How much would it cost for all the mods and is it hard to make it look like that?

[@cameroncook1252]

Where is the best place to buy a used one

[@dillanfernandez7347]

how did you put your plate there?

[@tapesyndrome]

how much travel in that air shock?

[@BrandonRyanPresents]

in oregon, you have to have a minimum amount of CC to be on highways.. I think 200 cc? these are only 49cc So in oregon. NO.

[@antonioahmad8856]

do you have any idea where I could get one of these bikes for goodbye

[@hunterblsr]

Hey man, I've been thinking about doing some air ride of my ruckus and was curious about your set up. Gy6 or get? And what all did you use?

[@andreimecadroyd6707]

Tenho um projeto antigo que pode ser utilizado vou postar o vídeo no meu canal

[@marcusriley4105]

what size is the front tire

[@edog2714]

Where did you get that exhaust and is it a yoshi?

[@FiftyStunts]

hey badass ruck you have there!! where can i find one of those headlights and how much are they!!

[@BrandonRyanPresents]

japan.webike.net/products/20981570.html

[@GUILLOT1NE]

Where did you get the airride and at what cost?

[@BrandonRyanPresents]

its just a bunch of random parts i found on ebay. there is no "kit" but im selling this "kit" for $450 including the mount.

[@againstthegrain5914]

Brandon Ryan hey man, do you still have that kit? if not can you assist me in what pieces i would need to make it? thanks in advance!

[@BrandonRyanPresents]

Omar Cruz No, i got rid of it. got too "trendy".. and honestly was more hassle then it was worth.

[@againstthegrain5914]

Oh was it now.. ya i hear ya, thanks for everything man! :)

[@future_phonk]

Was she just there to help in the video?

[@NateValdez]

Hey great bike! I hooked up the same light on my bike and when I switch from high beam to low beam the fuse blows... Do you know why?? Please help!

[@strtslpr]

Badass ruckus man .. By far the cleanest one I've seen yet.. Can you please give me some info on your air ride system.. like what size cylinder is that and what kind of compressor and is good.. Please point me in the right direction to finding these parts.. I've searched everywhere and can find any info.. THanks!

[@hazhamoto]

Подскажите, пожалуйста, название насоса для пневмы..!

[@chrissan-holo2739]

oh man, i think we got a badass over here

[@BrandonRyanPresents]

Rides like a dream.

[@ThatboiHunner]

Why is there 2 filters on the carb?

[@BrandonRyanPresents]

Hunter Dennis one is breather one is main intake. It's pretty common

[@soljaboi911]

Hey brandon sweet ruckus bro. How did mount the headlight? Did you need a bracket, if so from where?

[@BrandonRyanPresents]

im pretty sure it was something i just made. a flat piece of metal with some holes in it. I got rid of the headlight over a year ago. i didnt like how much it chattered while driving. the light at night was real annoying.

[@soljaboi911]

Brandon Ryan thanks for all the info brandon 😊

[@dgarrido745]

Are this allow in a highway? Or only local streets

[@zakyfa]

Clean looking ride fawesome build

[@BrandonRyanPresents]

Thank u friend. Prob a little outdated these days

[@markedlin3331]

What kind of compressor did you use? Have you got a parts list? :)

[@BrandonRyanPresents]

i havent rode this bike in a couple weeks. tearing it down and changing lots of stuff. I have no idea what NHDRO is :)

[@1dolladolla]

How did you get it stretched so low?

[@docoluv9]

Where do you get the mods for your ruckus?

[@kaimuzu8635]

How much do one of those cost?

[@v1ken]

which engine mount do you have?

[@BrandonRyanPresents]

I'm sure here in my State police can find things wrong and illegal with the bike. The only thing i have been pulled over for was the police officer could not see my tailight. Once he pulled me over he said. "Oh, there it is and advised me to get a brighter one" he did not say it was illegal only said it was not safe and that i needed a LARGER light so i dont get ran over. That was his opinion. The taillight is visible from the required distance during daylight and night.

[@BrandonRyanPresents]

if you have anymore questions lmk. ive owned over a dozen. I dont have all the answers, but i can point you in the right direction to someone who can answer.

[@wavesplease]

Where did you get the air ride?

[@BrandonRyanPresents]

Why not both? :) I also have a 2008 Yamaha R1 :)

[@Tslegacy]

Yo brotha do you have a shop?

[@MEGARETH69]

How much do want for?

[@RS-io6vm]

You headed to the cardinal game?

[@BrandonRyanPresents]

negative.

[@addee1425]

hey Brandon.... i never get tired watching this video... its awesome.. how much did u sell this ride for, if i may ask? did u sell it without the airride setup?

[@BrandonRyanPresents]

i never sold it :) just have it torn down-re building it.

[@andreimecadroyd6707]

Assim sobe e desce mas não amortece, o amortecedor tem que ser suspenso e não o próprio fazer esse movimento, pois será apenas um braço pneumático!

[@Rikutheguy]

how much for a stock ruckus

[@hurilo]

Will do man! Really appreciate that!

[@EbolaSquirrel]

that hydraulic system is a first for me edit: 7 months later and I just realized I wrote hydraulic system instead of airride,my bad.

[@iStayModern]

how much would something like this run for? ($)

[@nikhilshirke3293]

where i can find air suspension

[@ruck4-749]

what rear tire size?

[@BrandonRyanPresents]

165/55/12

[@KaRuSeJl]

There you on social networks? such as "In Touch" "Facebook," I'm just out of Russia, and I need your advice

[@mdmorto3853]

Nak pesan gimana cara nya kita jumpa

[@strtslpr]

I'll probably just stay away from the air ride upgrade then .. Your way looks a lot cleaner then the Forjworks' big bulky strut and clamp thing .. Too bad its not functionable..THanks! for the info.

[@LOWONBILLETS]

Honda for life.

[@djkarmal]

Next mod can be a floating seat so it dont hurt..b hard to make look clean