New Yaesu FT710 Review For CW Ops

The Yaesu FT710 was released here in the UK about 6 months ago so I'm a bit late doing a review of it but having just bought one I thought I'd show it from a CW operator's perspective..is it any good??

[@timsmith428]

...very nice..I have an Icom IC7300, and agree that these newer rigs are very good on cw, but most reviews, etc., barely mention cw performance at all...

[@barrykery1175]

Two weeks ago I purchased my FT-710 Field. Your video was VERY helpful in setting up the radio to my liking. Nice job. Thank. 73 de KU3X

[@jayKQ4DUX]

According to a Yaesu rep interview I saw, the reason against the HDMI is there is a possibility with some devices that use them to send voltage both ways. Some people have inadvertently burned out sound cards etc in computers and other devices when people connect them to the wrong type of devices.

[@Andy-hk4wn]

Many thanks, we look fwd to a new video with RX comparison of K2 and the 710 on CW

[@georgerex0]

You forgot one of the most important features. The APF. It's very important for CW.

[@keithwilliams3028]

Congratulations on purchasing your FT710, may I say that if your put your speaker on the right-hand side your stereo sound is better with the greater spread than the current position on the left along side the inbuilt speaker. As far as the external screen is concerned you can use a HDMI screen with DVI-D to HDMI cable, I have used both on my FT710 with great success, also a usb mouse very handy. Cheers and 7-3 Keith VK3KGW

[@ukrainehamradio]

Is it possible to make the display of vertical signals in the panorama smoother so that their twitching does not cause epilepsy attacks?

[@waakca]

I've seen other videos that say there is no averaging of the display so no real smoothing.

[@KD9ZHF]

I have a feeling it’s the camera. Mine doesn’t do this.

[@markmongold4137]

Couldn't agree more about the DVI-d. You can get an adapter from dvi to hdmi, that will make monitor selection easier.

[@waakca]

Yaesu does not recommend that. It will burn out the video card in the rig.

[@Andy-M938]

Poach...the relay klickidiklacki would me make mad. Tnx for the Video!

[@bucksboatanchors3328]

Interesting to see the new Yaesu rig....thanks for showing this. It would be good to hear your thoughts about it versus the K3S after a few weeks/months of CW operation particularly how the RXs compare listening to weak signals. SDR rigs tend to have quite harsh fatiguing audio I've found but I've read that the FT-710 is better than most in this respect. Your K3S will also adjust down to 50Hz bandwidth. Does the FT-710 use relays or pin diodes for TX/RX? I imagine that the FT-710 does a nice job on AM RX.

[@thewtf]

I think it uses relays as u can here it click on TX. Will have to see what its like on the AM net. Yes, that’s an idea, compare it with the K3s

[@Andy-hk4wn]

Many CW ops find ft-710 has too much "clicky" sound on CW. What do you think, as you have used it for longer now?

[@thewtf]

Yes, I think I would agree with you… it does not key as nicely as my K3s especially with a paddle. Seems better with a bug key

[@raulcroes]

Do you have any thoughts on the radio after one year?

[@thewtf]

Little more use to the cw keyer.. a bit characterless but it does what it says on the tin!

[@raulcroes]

@@thewtf thank es 73.

[@gettingpast4391]

Man I can not copy that spacing! Can't believe you were able to copy that

[@shaundickinson]

intresting fact if you by the radio and speaker separate it works out £55 pounds cheaper. so, not much of a deal in the end.

[@Dreamlgider]

hdmi also requires a licence

[@letmelooktv]

Im agonising over what hf rig to get. Go buy it for life and get something like this or go Chinesium with something like a g90

[@radiojourney3515]

Doesn't cut the mustard? Get ketchup

[@placeholder-065]

Try to avoid the on-off mouth smacking noises you make, it is annoying for many people.

[@VK4LL]

Nice to see your new rig operating. It would have been nice to touch on the keying relays and their ability to QSK. In the FT991A the ant relay is almost silent (without the preamp activated) but I was trying to listen on your video to get a feel for the relay noise (seems quite high) Do you ever use QSK? Vy 73 de VK4LL

[@thewtf]

Hi, I dont usually use QSK when Im on cw. I would not say the relay noise is any worse than my other rigs… but they are old!!

[@sciencefollower]

APPRECIATED. AP2KD

[@tonydennisG0PZX]

-E

[@donr2670]

Excellent++ video OM Justin, thanks for taking the time. You also have a great fist! de Wb8yqj Don