Once again you put out an awesome video. I'm all the time telling people about your vids here on KZbin. You and your vids are A-1 in my book bro. Good luck to who ever wins the prize. Keep on keeping on dude. OlllllllO.
@tedtedness1844 жыл бұрын
Yes, a 1/2 turn makes a difference. Others who see this, if you do it, get it aligned.
@seantbr2019 Жыл бұрын
Just ordered one
@CopeManMTNDEW7 жыл бұрын
liked and shared the vid. I've been telling all my budds about your channel. My buddy is running zj tie rods on his XJ. I'd love to win it for him. Love the channel. Love the vids. Love the Jeeps. keep it up
@feellnfroggy6 жыл бұрын
Those masonry bits are also pretty good for hardened steel Ive heard. At what lift is a mod like this necessary? And how much clearance do you actually gain? Does this prevent the pitman arm drop requirement? To what lift height? I hope my questions make sense. Also, why is the weld necessary?
@jtc62627 жыл бұрын
killing it ronnie
@danhambrick63317 жыл бұрын
Good job Red.Thats a cheap way to do.
@joesears7737 жыл бұрын
first time i have heard of this channel. nice video maybe ill win the flip kit haha! keep them coming. 2002 wrangler.
@MrPerson19957 жыл бұрын
Love your vids man, only a matter of time till you're at 100k.
@grahamburgdorf83977 жыл бұрын
cool video man. I will do a otk now
@StrainingDingelberry6 жыл бұрын
I had a easier time getting the bracket off by just cutting the welds and the whole thing just falls off
@my_name_is_chef48567 жыл бұрын
"Even 75 in Mexico..." XDXDXDXDXD
@justjsse89174 жыл бұрын
So if i have the zj tie tod and want to flip i have to cut the sway bar brackets?? Its my daily/ weekend warrior so id rather keep it. And i just got discos lol
@austincarter80126 жыл бұрын
What kind of machine shop doesn’t have a dill bit
@prospexican5 жыл бұрын
big hardware stores might
@juancandelaria75095 жыл бұрын
Nice video, I think your nex video gonna be how to check & replace an alternator, yours screaming like crazy (just a friendly advise to be ready before happen 😱👍
@markconley9965 жыл бұрын
Funny thing, when u held up.the directions, it calls the nylon nut "temporary "....
@hayzersolar Жыл бұрын
i want it if you still have it
@harrygatto5 жыл бұрын
Why are the split pins / cotter pins not fitted to the nuts securing the upper ball joints?
@andyward91664 жыл бұрын
So you only do the cutting and a drilling on the driver side the passenger side does not have any issues? That is with the ZJ tie rods
@jeepXstreme7 жыл бұрын
Done soon, great info man.
@55407jorge5 жыл бұрын
Let me get those!!!
@ninjascout4683 жыл бұрын
Excellent 👍👍
@ifitsnotbrokenfixit11937 жыл бұрын
all my friends watch your chanel.
@fancypolak7 жыл бұрын
Love your vids dude
@colbyragan71095 жыл бұрын
Where did you get those visors at look real good for what I can see and I want a pair!!
@oregonisnotabluestatekmats1176 жыл бұрын
Dude bro I love your channel dude you're down to earth type guy I would have loved to win that tie rod flip kit if I seen this video a while ago I ended up fabricating one of my own great videos brother keep them up when you head out to Oregon look me up I'll take you on a stag run
@elisalazar30975 жыл бұрын
Reamer
@junksilver41447 жыл бұрын
Good Stuff man
@cameronwebb39597 жыл бұрын
thanks for the info
@slyjeeper4 жыл бұрын
Im thinking the fuel pup is good on this xj
@DMPO767 жыл бұрын
thanks otk is coming soon
@dondorf1017 жыл бұрын
Thanks for the video! That's a great way of doing it.
@trinidadrm5 жыл бұрын
Do I have to get the Grand Cherokee tie rod set up or can my original one work? What about passenger side?
@outlander77177 жыл бұрын
I liked the vid even though I never win anything....
@kansascityjimi25314 жыл бұрын
Yeah buddy I'm sorry I just posted this on Facebook without hearing you out and you are just making one mistake after the next but apparently this video is 2 years old so you probably already heard that. You should have centered that locking piece on your steering rod because you can tell it the one side clamps over the end where there's nothing to hold up by Don to and the other side in front of the spring had plenty of meat get you should have said that piece you should have you should have seen that as quickly as I did and I am no mechanic
@TheBossFamilyvids5 жыл бұрын
Will this work on a 2 inch lift?And do you have to cut the sway bar bracket off?
@davidgreener4236 жыл бұрын
what happened missed tho drilling for the shim.
@thecherokeechannel6887 жыл бұрын
Great videos man. My Jeep channel is all wack😭.
@cherokeeronnie7 жыл бұрын
firemedic 2011 it's a good channel I watch every time you up load have been for awhile 👍🏻👍🏻👍🏻👍🏻
@LittleMikeStarCraft7 жыл бұрын
Just a word of advice... I had to reduce the volume in windows to 10%.. and the volume in the video to 4% in KZbin to just not get my ear drums blown out by the intro-- then the part with you talking, I had to turn up the volume just to hear you... and--- then.. by the time I finished writing this comment about it.. I lost interest in the video because of the pacing. Either way-- Cherokee's rock.
@jfehghfe7 жыл бұрын
Furness Prime don't do that on mine ?
@cherokeeronnie7 жыл бұрын
+Furness Prime sorry to hear that I apologize it don't do it on mine. I had to re upload this video 5 times maybe something happen idk I'll watch it again to be sure👍🏻
@LittleMikeStarCraft7 жыл бұрын
Were you wearing headphones?
@jchatwell7 жыл бұрын
Doesn't do that on mine. KZbin is at 100% and laptop is at 50%. Using headphones. Actually pretty low and need to turn laptop up to hear at a normal level!
@christopherc48356 жыл бұрын
Always somebody REEEEEEEEEEEEEEEEEEEEEEEE'ing about audio
@yodeuces39357 жыл бұрын
sorry for my ignorance... but why did you flip the tie rod?
@cherokeeronnie7 жыл бұрын
+Deuces Wild this jeep being low center of gravity when it's under the knuckle it sticks out like a sore thumb so after I put the v8 tie rod link on I flipped up top and it moves it out of the way from rocks and stuff
@sparta117 жыл бұрын
I wanna win it as well!!
@derrickwickline25827 жыл бұрын
shared and liked
@MrCard0315847 жыл бұрын
will it work on 94 grand cherokee laredo 5.2? if so i wouldn't mind entering to win a set. thanks for the consistently awesome content!
@MrCard0315847 жыл бұрын
could u link me the video of the junk yard lift kit springs i cant remember what they came off of.
@matthewmurray51683 жыл бұрын
Does this work with backspaced 15 in rims?
@kuntryhaveingfun71615 жыл бұрын
Were can I get one of them kits
@bombdiggitydave38812 жыл бұрын
L@@K ==> Enter me into the already over TIE rod flip ruske $20 kit. Ha 👍😁 p.s. luv the content and channel...stay dirty fri3nd!
@joeyx1346 жыл бұрын
Did you only do drivers side ? If so wouldn't that put it off level ?
@cherokeeronnie6 жыл бұрын
Joeyx13 if you notice my drag link is off of a grand v8 and it’s bent to make up for that
@joeyx1346 жыл бұрын
Cherokee Ronnie thanks, I'm getting ready to do the flip. Wasn't sure if you did both sides or one. Keep up the great work it's really appreciated.
@balzarini515 жыл бұрын
Lifted xj will have the driver side tie rod lower then the passenger side anyway
@mowerjoe75066 жыл бұрын
I have a 2000 xj sport,and the orginal owner had a notebook that he wrote down all the oil changes on,and the first oil change he did was in 1997, how did he do an oil change in 97 when mines a 2000?
@lorenzogarcia73046 жыл бұрын
That's funny dude
@gregr.38866 жыл бұрын
Time travel
@soldier3719 ай бұрын
Maybe the Vin is for a 2000 but the body is a 97? I've heard of Vin swaps like that before anyway
@goonzgarage33895 жыл бұрын
Do you not run a sway bar?
@cherokeeronnie5 жыл бұрын
Nope
@goonzgarage33895 жыл бұрын
Cherokee Ronnie is the sway bar needed? How does not having it affect the drive ability?
@cherokeeronnie5 жыл бұрын
If your around 3 inches it isn’t bad at all just kinda rocks I ran mine with a 4.5 inch lift for 3 years no problems just rocks a little bit but any higher you definitely should get some to be safe
@seantbr2019 Жыл бұрын
I don't either I daily drive without one highway speeds
@shaunmckain38547 жыл бұрын
I wanna win it
@stephenanderson56307 жыл бұрын
hey Ron what kind rims are those and where'd you get them?
@cherokeeronnie7 жыл бұрын
Stephen Anderson JEGS Baja 8s
@creepypastabowl6 жыл бұрын
This is a kit for an extremely low budget!
@cherokeeronnie6 жыл бұрын
This is why this channel was created
@TheCthtoNicfLy6 жыл бұрын
drill bit.............................Drill Hog USA 3/4" Drill Bit 3/4" Silver & Deming Bit HI-Molybdenum M7 by Drill Hog
@thruitallauto25386 жыл бұрын
What’s the purpose in this
@cherokeeronnie6 жыл бұрын
For me it got it out of the way so I didn’t bend it
@AndrewBrowner7 жыл бұрын
who won the kit?
@cherokeeronnie7 жыл бұрын
+Andrew Browner mat wiggs
@jacksonscrymgeour93307 жыл бұрын
If I won I will be forced to get a new tie rod
@DestDroid7 жыл бұрын
Well if I win this then I'll be forced to finally upgrade my tie rod...
@kansascityjimi25314 жыл бұрын
As a mason the first thing I want to say is please it's Masonry not masonary Masonry build the church Mason Aries preach in the church. There is only one a in Masonry 2 or second point I can't wait to hear I'm only at 2 minutes and 38 seconds in I can't wait to hear how this goes because I'm positive a masonry bit is not going to get you there
@matt_wiggs477 жыл бұрын
liked and shared bro pick me bro i need one
@project_golden_badger4877 жыл бұрын
I will definitely have to order a flip kit next week or so when I get my ZJ tie rod to swap in. Check out my jeep on Instagram, @Project_Golden_Badger sweet videos man, real inspiration for me. The jeep is my way of fighting my depression.
@skullieoregon63787 жыл бұрын
I would love to win it for my 92 Cherokee. Xjoutlaw69