You can run those hole saws backwards to start and get a little rut going and then run it normal a bit easier without a fear of it jumping or grabbing and rotating out. Great job on these builds tho. Super impressive for anyone let alone guys as young as you all.
@chiliprepper76786 жыл бұрын
I have to get to work on my CJ-7. Good work. 👍😀
@matthewpostlewait18576 жыл бұрын
Super clean cj build. I really like your seats and center consol
@brianpardee12816 жыл бұрын
He called it a 350 hell yeah brother
@morpar3186 жыл бұрын
Dude seriously next time you are using the hole saw don't use any pressure on the blade let the teeth cut into the metal slowly and applied gentle pressure not full force otherwise the blade will not work properly.
@Troche5716 жыл бұрын
Great Job, been following since you kicked off the build.
@greg12686 жыл бұрын
Nice job! I like how the leds turned out...
@nachovalenti5 жыл бұрын
Awesome Jeep and very well building. Congrats guys!!😍
@chiliprepper76786 жыл бұрын
I like the cheap Tractor Supply box to keep some things locked and out of sight.
@pereaelguapo6 жыл бұрын
That drill is dead lol. Nice jeep!
@GarageBuddys6 жыл бұрын
Nice job 👍!I also made a lot of upgrade on my CJ7, I swapped 2.4 with 2.8 TD, the sbc 350 its very expensive for daily use. In Italy gasoline its very expensive 😡
@metalman0655 жыл бұрын
Jeep looks awesome 👌. Some 2" wheel spacers would give it a wider stance and look sweet. Music sounded real good, clean and crisp, nice.
@Rocklanderoverland6 жыл бұрын
Hey man! I love this build and the time/effort you put into it. ive watched the entire playlist. You look like you're around my age (i'm 20) I wish we lived closer cause I think we'd be good friends! i've got an 03 TJ... Love it!
@Aikidoman066 жыл бұрын
When drilling and cutting metal use low speed
@mikeyoung63476 жыл бұрын
Its a very nice JEEP. The color is sweet. I'm wondering why all the dash upgrades weren't done when the rebuild was happening? You put me in physical pain when you drilled through the dash. its disappointing not seeing the glove box. where do you keep your gloves?!
@triplethreatengineering78456 жыл бұрын
love ur vids keep up the good work!btw I subscribed!
@SchnebsGarage5 жыл бұрын
That drill lol.
@ronshauling20004 жыл бұрын
Looking good and bad ass may not be strong enough words for this build. What rear bumper are you using? Receiver hitch for pulling or hooking to? Just curious. Thanks for the videos
@jimmelnik38494 жыл бұрын
How is the 350 running? How many miles do you have on it now? Would you buy the same motor again? Getting ready to buy one myself.
@jethromotorco30436 жыл бұрын
Do you guys use premiere pro for your editing? I like how everything always flows together and was just wondering how you got it together.
@BuildBreakRepeat6 жыл бұрын
Jethro Motor co I use iMovie to assemble the clips and then premier pro for editing colors/audio and stuff. But all the transitions are just iMovie.
@jethromotorco30436 жыл бұрын
That’s awesome. I use iMovie some as well I just wish it had more features
@haroldrevilla68225 жыл бұрын
Hello ,bro where can i Buy that system sound complete?
@thomasrhoades51316 жыл бұрын
Great video
@jimmelnik38495 жыл бұрын
Do you guys have a parts list for this build? I'm interested in doing something like this and I'd love to see what you bought and were. Great job by the way. Outstanding work.
@MrFoxbody875 жыл бұрын
Bro i have an 84 cj7. Looking for Both driver and pass seat and center cosole combination. I like your set up of what did u use?
@larryalexander48336 жыл бұрын
Glad to see your still interested in it ! Not sure I would have mounted the msd box that low ? But should be ok
@BuildBreakRepeat6 жыл бұрын
Larry Alexander Yeah, we were thinking about that, I might relocate it in the future but for now it’ll work alright.
@carlosyepez7436 жыл бұрын
Great work guys!!! Really love your jeep especially the color. Trying to start a similar project of my own. One question whats your opinion on fiberglass CJ7 tubs , hoods, fenders etc? P.S. I live in south america and do not have acess to parts like you guys do in the states.
@davidjessee77013 жыл бұрын
I installed a thermostat controlled switch to my rad fan...
@callaninfalt67583 жыл бұрын
What radiator did you use?
@freezed33765 жыл бұрын
A guy wants to trade a 73 Jeep cj5 3sp 4*4 for my 07 Saturn Vue should I trade
@Kevvomontgomery5 жыл бұрын
Where did you purchase the side steps? I just bought a '74 CJ5 today and I love the minimalist look....
@patrickfields33925 жыл бұрын
Kevin Montgomery I think they hand made them
@javiermendoza40063 жыл бұрын
What kind of engine do you have in your jeep?
@dylan345694 жыл бұрын
Hey man, I have a CJ5 and installed the same radio and it works fine when it’s not running but when I start it the radio makes a loud popping sound and shit, how did you wire the power wiring and whatnot with this radio?
@GusgusA14 жыл бұрын
try moving your wires. may have interference from ignition
@RangerRick92116 жыл бұрын
Whoop!
@baconbacon3326 жыл бұрын
Nice dog
@davidviens71586 жыл бұрын
Hey great video! What year is the CJ-7? I have a ‘80 CJ-5
@turtleindustries51346 жыл бұрын
David Viens Read the description lol, it’s a 1981
@davidviens71586 жыл бұрын
Startled Rhino my bad and thank you
@ramonserrano25906 жыл бұрын
How much was yalls paint job I need to get my comanche painted
@BuildBreakRepeat6 жыл бұрын
Ramon Serrano It was like 1k, we did all of the prep and stuff, just told them to spray it. It’s pretty good for the price and turnaround time.
@kentuckyjustice14086 жыл бұрын
Where's the gun rack? You have to have a solid rack for your AR-15 or your pump shotgun. Good video.
@chilledramen82414 жыл бұрын
when you notice that the switch holes aren't level
@JohnWheels6 жыл бұрын
Do EFI on the jeep
@waterflow23246 жыл бұрын
She for sale?
@joseangelsalazargutierrez47685 жыл бұрын
Amplifier name ??
@davidkeetz3 жыл бұрын
oh this was painful to watch.....at least while I have yet to get my hands on a clean CJ all I'm thinking is "another one bites the dust"......but if I had to go all horror show on a CJ, this is kind of stuff I'd want to do - love the toggle switches so good job on that - upgrade your drill game though for sure.
@NitroXBL6 жыл бұрын
What do you do for a job?
@georgegrundeman75096 жыл бұрын
heres a hint "do you want fries with that?"
@gurnblanstein98163 жыл бұрын
Your rear shackle angles are way off.
@MrJeepmarine5 жыл бұрын
Jeep Cjs are trucks, not cars.
@BrutustheGladiator6 жыл бұрын
He actually works on vehicle??? Kinda scary I’ll be sure not to let him work on mine