Jeep J6 assembly manual 3d printed RC car body

Jeep J6 assembly manual
3d printed Rc body with ABS plastic.
Timecode:
04:13 Removing supports from body
2:49 Smoothing and gluing parts
8:28 Smoothing joints of parts of body
10:30 Smoothing body with sandpaper
13:26 Using plastik filler 2k
18:12 Work on front and rear bumpers
20:00 Acetone smoothing body and parts
22:50 Work on wheels arch
23:36 Headlights
24:34 Paint parts
25:28 Work on windows
27:11 Attach all parts on the body.

[@xd_gangster693]

WOW this is awesome! looks like i need to get myself a 3d printer

[@primasyuana]

Great work.. Thanks for sharing..

[@EasyDesigns]

You're skilled.

[@Marco_Vulpine]

Love this, great job. I can't wait until there is a 2door JL Rubicon hard body

[@leontaylor6011]

you prolly dont give a shit but if you guys are stoned like me during the covid times you can watch pretty much all of the new series on instaflixxer. Have been streaming with my gf for the last couple of weeks =)

[@garrettluis3960]

@Leon Taylor yup, I have been watching on InstaFlixxer for years myself =)

[@kodajairo8193]

@Leon Taylor definitely, have been using instaflixxer for months myself :)

[@israelkelvin6068]

@Leon Taylor definitely, have been watching on InstaFlixxer for years myself :D

[@oreos922]

I've been using go fuck myself to watch movies, it's great and I don't get scammed (:

[@ChazMations]

Mind giving me a link to the electronics you used?

[@AirborneSimulations]

Your skilled. What did you use for the windows?

[@JoryDion]

I Purchased the 4 door gladiator also...it seems like its a smidge to big for my traxxas tactical chassis is there something else I need to do other then cantilever suspension? 1 more question how do I mount the bumpers?

[@moskcustoms]

Hi. Sorry for later reply. Need extension rear axle. Front bumber directly on chassis, rear on supports on the bed (stl in archive).

[@albertoqc3204]

Nice guide and video! One question, If It print It in PLA or Petg It Will be hard for crawler? Thank you

[@moskcustoms]

Thanks. Abs plastic.

[@pkalogi]

i wish i could get my supports to come off so easily.... i'm using cura 4.4 (petg)..... do you gave any suggestions or maybe even a profile? i just bought your file yesterday. thanks for the great work by the way!

[@moskcustoms]

hello. thanks. Oh unfortanatelly i dont know becouse i use simplify3d for create gcode files.

[@pkalogi]

@@moskcustoms thank you for the response. i will figure it out......... or ill start using simplify3d hahahaaha

[@JoryDion]

@@pkalogi I used cura 4.4 and my supports broke off just fine. there is settings in your support section in advanced settings in Cura to make supports break of easier

[@RetroNicoSche]

Nice work live it witch Glue do you use?

[@moskcustoms]

Thanks. cyanoacrylate.

[@kushagrapatni7349]

Which software you used for 3d modelling ?

[@moskcustoms]

Rhino3d

[@bart_fpv2408]

i want to know the thickness of lexan for windows. is it 0.5t? or 1t?

[@moskcustoms]

0.75, better 0.5mm. Also Petg work good.

[@bart_fpv2408]

@@moskcustoms thanks a lot. i found 0.8t lexan.

[@alexthompson9646]

Not to sound stupid but is the acetone acting like sandpaper?

[@moskcustoms]

Hi. No, acetone smooth material, and sandpaper remove.

[@Getswifty27]

I just bought your STL files for the 4 door gladiator. Should I print in ABS or PLA? And did you print the head lights and tail lights?

[@moskcustoms]

Hello. I print them in ABS, and headlights with trasparente resin. But you can use all what you want. Pla or Petg also will be good.

[@FishingPhoFun]

Where can the STL be purchased?

[@GS-1982]

Gdzie można znaleźć pliki do druku ?

[@moskcustoms]

Uhm i don't understand.. 🙈

[@chriscoetzee774]

Where can I get a file to print it

[@moskcustoms]

cults3d.com/en/users/ilyakapitonov/creations

[@simonecantoia7181]

did you print it?

[@moskcustoms]

Cioa Simone, si si. Mi trovi su fb come custom rc bodies.

[@WheelinMT406]

You have a way for someone to message you? I'm about to print of your gladiators. Say via Facebook?

[@moskcustoms]

Hi. Yes write me on FB. 3Dmoskcustoms or write me on my profile Ilya kapitonov.

[@user-qu4hb5we9o]

What is the minimum print area?

[@moskcustoms]

Можно 20х20, но лучше иметь с запасом 30х20.

[@user-qu4hb5we9o]

I have an anycubic kassel linearplus. it has a round table with a diameter of 230mm and a height of 300. I think if it doesn't fit, you can always divide the part into several small ones in the program and then glue everything together.

[@moskcustoms]

@@user-qu4hb5we9o hi. Checked now, in 230 diameter fix perfectly. Nothing problem for print it. Big "cabin" part stay good. If you want write me on Facebook page - 3dmoskcustoms

[@robsonbinho5378]

pode passa o stl?

[@moskcustoms]

cults3d.com/en/3d-model/various/rc-hard-body-jeep-j6-scaler-313mm-mst-trx4-axial-ilyakapitonov

[@sergeykoksharov9588]

good afternoon, printed by Jee, this is excellent!!! Do you have any printable files that you would like to share??? I want to promote my hobby in my village. I will be very grateful to you, thank you.

[@moskcustoms]

cults3d.com/en/users/ilyakapitonov/creations

[@ericcxxxx]

links pz

[@moskcustoms]

cults3d.com/en/3d-model/various/rc-hard-body-jeep-j6-scaler-313mm-mst-trx4-axial-ilyakapitonov On my profile you can find also Off-road version.

[@ericcxxxx]

@@moskcustoms thanks nice job

[@ericcxxxx]

@@moskcustoms do you do request?

[@ericcxxxx]

@@moskcustoms and how many rolls dose it take to print a body?

[@moskcustoms]

That k you. For print time depend what layer do you use. I print at 0.25mm and for full body take around 2 days ( 48hours) and also for little parts i use second printer and need around 12 hours for all little parts.