Jeep Liberty KJ Overland Build Walk Around & Roofnest Condor Roof Top Tent | Off-Road 4x4

In This video I walk around my Jeep Liberty KJ Overland Build with the Roofnest Condor Roof Top Tent. I go over everything I have added up to this point and show how it looks. Liberties are not often seen in overlanding, but If you can find a Liberty in good working condition with low miles I think it is a great platform for overlanding for those who are in a budget. I also discuss future plans that I want to add to complete the build. I have enjoyed this for off road 4x4 overlanding. Please let me know if you have questions or suggestions.
#jeep #liberty #overland #roofnest #condor #4x4 #offroad
Gear in this video
Interior:
Phone mount: amzn.to/2V4Wwmi
Ham mount: jeepuniq.com/
Ipad mini mount: amzn.to/3zNL9OC
u bolt for ipad mount: amzn.to/3x6zQzj
Rear rack (limited remaining stock, must call AllJ's): www.alljproducts.com/frankenlift
Lift:
Rear shocks (extended): www.rocky-road.com/jeep-liber...
Rear Springs: www.rocky-road.com/jeep-liber...
Rear Control Arm set: www.ironrockoffroad.com/produ...
JBA Front UCAs: jbaoffroad.com/jba-upper-a-ar...
Extended Bump stops:
(JBA no longer makes suspension lifts like I have in the front nor do they make the 4xguard skid plates, but below are some alternatives I found that would work similar)
Front adjustable coilovers (JBA alternative): cb-engineer.com/products/jeep...
Skid Plates: www.skidrowoffroad.com/produc...
Exterior:
Boulder bars (Must call AllJs): www.alljproducts.com/frankenlift
Exhaust: www.quadratec.com/products/MB...
Steel Roof Rails: www.rocky-road.com/jeep-liber...
Roof Rack: www.rocky-road.com/safari-jee...
Roofnest Tent:
(alternative option: ) Ikamper Tent: bit.ly/3zp1dpj
Winch: amzn.to/2WAlJ8L
Front Bumper: arbusa.com/jeep-liberty-2002-...
Head Lights: c4vheadlights.com/
Let me know if you have questions on gear I left out. And stay tuned for some overlanding videos
________________________________________________________
Camera gear:
Drone - amzn.to/3vk0Afd
Phone - amzn.to/3sMvU4n
Pocket 2 - amzn.to/32GcJ1N
Camera: amzn.to/2UERNYv
Sigma 16 f1.4: amzn.to/3x0pIId
Sony 10-18 lens: amzn.to/3zoJMFH
Tamron 17-70 lens: amzn.to/3kGBhSt
Tamron 11-20 lens: amzn.to/3BGMb0m
Microphone - amzn.to/3tOm03J
Windscreen - amzn.to/3dHRNgZ
Tripod - amzn.to/3gAv3l2
Joby Head - amzn.to/3tQwQGc
Joby Pod: amzn.to/3kyUpkI
studio lights: amzn.to/3xYET65
________________________________________________________
If you'd like to help out this channel, shop with these links below:
Backcountry: bit.ly/3k0QOf9
REI: bit.ly/3z21PAX
Osprey: bit.ly/2YMp1XF
Hyperlite Mountain Gear : bit.ly/3nn3Aqo
Outdoor Vitals: bit.ly/3yYFsfL
Enlightened Equipment: bit.ly/3hlkyld
Cnoc Outdoors: bit.ly/2XibwhP
IKamper: bit.ly/3lzB1n7
BioLite: bit.ly/3zgSoxK
Helinox: bit.ly/3lF21l0
Nemo: bit.ly/3CRClsf
Injinji: bit.ly/3nMjWc4
MSR: bit.ly/3CobL9X
Therm-a-Rest: bit.ly/3AmMzAl
Garage Grown Gear: bit.ly/3BVfv2y
Klymit: bit.ly/3C3JTaX
BRoadout: bit.ly/3hms7rJ
SeaToSummit: bit.ly/3lUyOmk
Hydro Flask: bit.ly/3nmC2RV
GCI Outdoors: bit.ly/393YsyN
Black Diamond: bit.ly/3lkLpyR
Solo Stove: bit.ly/3xW8koy
Tread Labs: bit.ly/3BVk7po
Feathered Friends: bit.ly/3lpoaUr
Nomadik: bit.ly/2Xvh5cp
Platypus: bit.ly/3km5llO
VSSL Flashlights: bit.ly/3hL4glw
PackTowl: bit.ly/3CsIQl5
SealLine: bit.ly/3hGlZuD
What's with all the links? These affiliate links are the best way for me to invest money back into this channel to purchase equipment, gear and pay for trips. By clicking on these links to do the shopping you would do regardless, I get a minimal kickback from the sale. This is the best way to support this channel without it costing you anything more than what you would already be spending. Thanks so much!

[@kenbryant5952]

I have a 2005 liberty. I live in Illinois. I have Maintained it. Always fixed any mechanical or rust issues. I like what you did with yours. I have 259,000 miles and mine drives like new. I'm going to steal some of your ideas. I already have the upgraded roof mounts. I took the back seats out for more storage. I might do the tent and an awing. Thanks for the video

[@BackcountryRenegade]

your welcome. I have the roof rack for sale locally here for a good price if your interested

[@kenbryant5952]

@@BackcountryRenegade thank you for the offer. I have 3 cross rails so really no need for the rack. I'm considering a tent but I have an elevated (only lightly) sleep platform inside. I take out all but the drivers seat to accommodate this. The height is level with the console. So I have plenty of storage too. I have custom screens that fit the windows also for ventilation with bug protection. So I'm considering a rooftop tent ⛺️ but may go with a rooftop storage box instead.

[@MrMandala1111]

Nice setup man. One thing to be mindful of is the roof load rating. The rating is based on the roof mounting and not the roof rack fitted. I have a 2011 Liberty with basically the same mount's as your's and has a measly 72kg load limit and Jeep told me it's based on the mounting. I have fitted a light weight soft top rtt as most hard tops are too heavy with my diy prinsu style roof rack which weigh's around 30kg. Cheers

[@BackcountryRenegade]

yep found that out that hard way and already fixed the issue. If yout notice in my newer vids the new rack. Ill eventually do a vid explain all that needs to be done to keep a rack and rtt up, but the one in this vid, wont work the best.

[@Porch06489]

Love the build! I just got my first Liberty to work on (2007). I love it!! Thanks for some inspiration

[@MochiMotoPa]

beauty i have an 03 liberty sport and have been trying to find decent quality overlanding starting points for my jeep your video has given me lots of insight

[@BackcountryRenegade]

Thanks! Glad it was helpful

[@mattgaming8717]

Yup. We need to see more libertys hooked up

[@luiscordova7851]

Nice vid! I have a 03 Renegade ! That Condor Tent is perfect!

[@mykelbankz]

I drive one of these and i am considering overlanding. Its so good to come across your video

[@killerdatsun]

What a great build. Thanks for sharing!

[@BackcountryRenegade]

Thanks, few more things to add, but getting there.

[@slspg]

Really cool setup my friend.Those are great units unlike what car journalists have said. My wife and I had 2. Very durable little SUV and very capable off-road. Wouldn't have a problem owning one again.

[@haydnbrittain5197]

I just bought a liberty. This video is so good

[@BackcountryRenegade]

Thanks im going to do a update on it soon what some changes and additions I’ve done

[@jimmym02]

man that's nice

[@BackcountryRenegade]

Glad you think so!

[@torreyinnewyorkcity334]

Amazing job!!

[@mattgaming8717]

Love it.

[@mrdaniel7129]

Brother thank you very much for the video and the link to the products ! I found a lot of things that I need and I didn't know the name of the part.

[@garyfujinami9911]

Great build! Well thought out. The beauty of today is that there is so much out there to personalize your rig for your needs. Personally, other than getting off the ground in bear country, I don't see the fascination w roof top tents. It's like having a pickup w a slide in. Once you set up camp you can't use your vehicle. Also, it's hard to climb down in the middle of the night to pee. Watch that 1st step! Haha. I'm also in the process of a liberty build. I chose the liberty cuz it's small yet has 4 doors AND, I hate side by sides. Except for the real small side bys, it's about the same size as most and smaller than some AND, already has a hvac system and a windshield. As it is, it's amazing how capable it is. We use it as our hunting rig. Downside is the ground clearance in stock form. I'm collecting parts for an upgrade: ford 8.8 rear, dana 44 front, dodge 4.7L. Gonna keep the tire size limited to 33s.

[@BrwnShinobi]

Amazing build!!! inspiring

[@BackcountryRenegade]

Glad you like it!

[@BAKKATIT]

I myself from Renton. I'm rocking the 2006 Limited. Love the video.

[@BackcountryRenegade]

Sweet! Glad you liked it. More to come !

[@Mark-gx1ee]

I'm a fellow KJ owner and a fellow red raider! Love seeing all the upgrades you installed, and you got some good stuff on your KJ. I'm definitely grabbing one of those ham radio mounts and the crossbars and rails. I got the OME coil springs with Bilstein shocks which I'm installing next month. Wreck em!

[@BackcountryRenegade]

Awesome!!! cool to run into another red raider! Would love to see ur KJ. Wreck em

[@douglasangelflores6796]

Very nice!

[@CalebSTACHECarter]

Great build! Working on a project 2003 Liberty now. Would love to see more overland content on your channel. Keep an eye out, I'll have some coming soon as well as I begin my project! Great video, keep em' coming!

[@BackcountryRenegade]

Thanks! Yep hope to get more overlanding stuff out soon! Thanks for watching. I’ll check urs as well.

[@suroorsidhique4543]

You did such a great work man. I was looking for this exact concept. Loves from Dubai.

[@cjune21]

This guy didn't do this he paid somebody come on he's from some affluent something about his neighborhood and it's squeaky clean Jeep funny kind of why did he just buy some really expensive kind of makes me want to throw up I'm going to hang out with some real guys and drink a beer and go catch me some snapper I ain't into this brokeback cowboy stuff

[@Redtruckusa]

Beautiful jeep. Congratulations 👍👍

[@BackcountryRenegade]

Thank you. I love it

[@howardsells2000]

I know this is a old video but I really like your setup. Thanks for sharing.

[@BackcountryRenegade]

your welcome. i have a new update vid ill be doing soon on the set up so stay tuned for that.

[@eMotoAZ]

Very Nice!

[@BackcountryRenegade]

Thanks. More to come. I need to film one with my updates

[@libertytrailsoverland565]

Awesome video, gives me lots of ideas. I'm curious about your wheels and tires. What size rims are you running? Did your backspacing have issues? Did you have to use any spacers? And what size tires are you running. I appreciate it!

[@bradcomis1066]

This thing is sick. Good work here. I reckon you've done lots of work getting it to where it is now! One thing to potentially add would be the clutch fan and shroud to keep the engine temperatures in check in case another "heat dome" comes and roasts us again next year. From what I hear overheating this engine is quite bad and the Liberty's that weren't equipped with the tow package have only got that tiny little fan up front. I'd say its a bit risky, especially since you are hauling around lots of extra gear. Anyhow, keep it up and please update us with how the future extra large tires fit.

[@BackcountryRenegade]

thanks for the suggestion. ill looking into that for sure.

[@daviddunn3296]

I have a KJ with the 5 speed and was surprised to see one with the 6 speed bc I thought there duel mass flywheel was a big failure point and expensive to fix!

[@americandad4864]

Nice Jeep . Kind of over the top , but very well done .

[@akemonjames]

Kool video. IDK if you put the lowers on yet or not. My advice is to keep them the stock length. The liberty axle swings in a arc vs straight up and down. Centering the tire in the wheel well, will cause it to move towards the rear when stuffed.

[@BackcountryRenegade]

Haven’t put them on yet, but that’s for the suggestion

[@stevencarter7999]

Dude I'm jealous of your 6 speed manual trans.

[@BackcountryRenegade]

thanks, I really enjoy it

[@rheannahicks6363]

I've got a 2005 Renegade 6 speed, your jeep is goals, love everything.

[@BackcountryRenegade]

thanks! glad it can be some inspiration for you.

[@jamescarter6318]

3:48 Looks like that lift is taking a toll on your lower ball joint. I know you said you want 32s, I would look into finding 15s that clear the caliper and 265/70r15s. You can bring down that lift to 2 inches and save your suspension from being worn out. And gas too.

[@mikegoodloe3687]

Guns up 👆

[@MountainmanBuildz]

Very nice build. Also busy with a KJ on my channel, and owning a JKU or the more extreme adventures.

[@BackcountryRenegade]

thanks! and awesome ill check it out

[@MountainmanBuildz]

@@BackcountryRenegade thank you

[@dustingaither9146]

Awesome walk around! I have a 03 Liberty with 2.5 lift and 30.5 in All Terrain tires. You have a great build. Check out some of the soft storage gear from Blue Ridge Overland. I’ve set mine up with they’re gear. He’s actually the reason I got into Overland because he’s in my home town in Virginia. He custom made a attic for my Liberty. Thanks for the walk around and the info and where you got your aftermarket parts not a lot of Liberty's out on the trail but it’s great gettin all the looks when your running the same trail as the Wranglers. Keep up the good work. Thanks

[@BackcountryRenegade]

Awesome! Very cool I’ll check him out. Thanks

[@williamcrawford1085]

Dustin : what kind of 2.5 lift and did it bolt up with factory suspension and steering ?

[@dustingaither9146]

It is a spacer lift. Not the best lift but the most economical. I have a 2.5 inch Day Star lift. I did a lot of looking around before I bought it. I was leaning very heavy on the 3 in rough country but every one that had it on for a while complained about the springs settle real bad. You put the spacers right on top of the strings . Rear one are easy. The front a little more challenging. There is a plate that goes on top of the spring. I can’t remember exactly everything it took to get it on but we did tack weld the bolts that come with the plate and used a hydraulic press to get the spring apart to mount plate and spacer. Getting the springs back in did take a little team work to get it back in the a arms. If you have mechanical abilities and are comfortable it’s not bad to do. There is several videos of people putting this lift on. You will have to get it aligned up when your done. I did put longer brake lines by Jeeping By Al because I do flex it completely out and it was stretching them a little. The main reason why I went with the Daystar was I was reading a comment thread like this one and a guy was trashing the spacer lift telling people to go buy a Wrangler and get a real Jeep. A guy commented to him that he had a Wrangler on 35s and was all decked out for crawling. But he had a Liberty for his daily driver had his Daystar for five years and said if you did light wheeling or just wanted the Liberty to Have a better stance the Daystar had worked great for him. That sold me. I’ve had mine on About a year and a half. It’s worked great for me. We do a lot of gravel fire roads and moderate trails. On the trail it gets attention because it’s so different .

[@creepysalamanderguy]

Digging the lights! Have a link to C3 Customs...is about 40 companies with that name...most for corvettes...

[@BackcountryRenegade]

sorry it is called c4 lifestyle. here is a link: c4vheadlights.com/

[@jonwetenkamp88]

Your setup is so legit. Great looking jeep. Simple, but very attractive. The only thing I was left wondering is if you have ever upgraded your seats? That’s what I’m trying to upgrade right now. Got anything? I definitely took note of the parts and manufactures you mentioned already! Many thanks!

[@BackcountryRenegade]

Thanks! I have not really looked into the seats. That may be something I upgrade down the road. Ive done a few more updates since this vid im going to to have to do another soon.

[@TomaszbtdZiobrowski]

great, very informative video. owning '03 crd and looking for ideas for next upgrades.

[@BackcountryRenegade]

Glad it was helpful!

[@jasonjulian1]

A Renegade with a 6spd, super rare! Sadly so many of these parts for the KJ are no longer available. Even many of your links lead to dead pages.

[@BackcountryRenegade]

Thanks. Yeah I’ll try to update the links if I can find at least things comparable

[@jasonjulian1]

@@BackcountryRenegade I'm sure people would appreciate it! I've had my KJ since '09, got the OME/Bilstein lift, Dakota load levelers out back. I missed the opportunity to buy the ARB bumper years back when they were under $1k. Still kicking myself for that.

[@scoobygms210]

i love my liberty but i love it cus its CHEAP and fun idk if i could spend this much on a liberty but cool build

[@COMtnPilot]

Good vid and info. Just called Rocky Road Outfitters and asked them if they had the roof rails in stock and/or what the lead time was to ship a set to me. The told me 16 weeks! That’s 4 months! Fuck that! I’ll fab my own!!!

[@BackcountryRenegade]

Yeah if you can do it go for it. I do t have the skills for just bought them

[@tannerbass2533]

Loving the roof top tent setup, i'm interested in installing one on my jeep liberty, could you link the rack, and anything else required to install the tent? Or add it too the description as i'm sure others are interested. I have no experience on what is required.

[@BackcountryRenegade]

You will need to upgrade the side rails also. added the parts i used in the descriptions.

[@PhatboyHD88]

Didn’t see a fridge ? Maybe i missed it 🤷‍♀️ and i saw a little heater up in the tent , who makes that ? I also have a 06 liberty .. they are basically a first gen JK in a different smaller body, same trans and transfer case 81/4 rear ( same as a dana 44) and the 3.7 has about 20 more HP than the 3.8 . And towing and payload is higher on the liberty than the wrangler.. perfect jeep for me .. mine is the Max tow model it has the engine clutch fan with the normal fan also, and power steering cooler and trans cooler ..

[@garyfujinami9911]

The chrysler 8.25 refers to the ring gear diameter and comes w 29 spline axles if I remember right when I took my wife's liberty apart. It is a good rearend for a stocker. The dana 44 on the other hand, is in its 2nd generation now. The 1st gen has been upgrade throughout the years but, is characterized w an 8.5 diameter ring gear that translates to overall bigger parts like the spiders. Also, it comes w 30 sp axles. I know what you're thinking, 1 more sp is no biggie. The axle needs to be bigger to have 1 more spline. The 2nd gen if coming off the rear if a Rubicon has an 8.8 diameter ring gear and 32 spline axles which would make considerably stronger.

[@JeepTJWheelin]

If you were to get a KJ, these '05-'06 Renegades are the ones to get! These were the only years that had the stout Wrangler type hood. The other Renegade years and all other trim levels no matter what year, had that very feminine bug eyed hood, definitely not a man's Jeep! I had an '06 Renegade and my son and I had a lot of fun snow wheelin' with it upstate NY. Put 31" Duratracs on it and it handled a foot of snow with no problem. Of course, I aired down and had it in 4•Hi. 🌨❄🌬

[@BackcountryRenegade]

Agreed, the flat hoods are the way to go. Not a fan of the bug eyes

[@Rootie222]

Insecure much?

[@JeepTJWheelin]

@@Rootie222 Always can spot someone who has the feminine bug eyes, sorry dude. 😎

[@JoeyRock333]

Awesome Build. Can you tell me what the part number is for the OME rear extended shocks? RRO do not list the part number.

[@chrisyoder8429]

Add the shocks to your cart, it will list the part numbers then

[@TeamRegulate22]

What shocks is this on? I have the skyjacker lift and seems too soft for off roading,great for street use

[@caseyfox4414]

Nice build# II have an '05 Renegade, set up very similar same bumper, Frankenlift, 31x10.50 Duratracs, JCR sliders, roof rack, etc... how are the front recovery points mounted?

[@BackcountryRenegade]

Thanks, the recovery pointes are drilled in the front and are reinforced with steel plated from behind and then bolted on.

[@caseyfox4414]

@@BackcountryRenegade Thanks! I really like the front skid that used to be made/ sold by Jeepin' by Al, but waited too long to buy one. I've thought about making my own but didn't wanna cover my front tow hooks..

[@AlbertoGonzalez-lt9if]

What roof rack bars u use for hold the rooftent?

[@seanhaning1516]

Love the rear rack in the cargo area. Can you post a link? I tried to search All J’s etc with no luck.

[@BackcountryRenegade]

here is the site. it is not listed, you will have to call and ask for it. They were only making a limited amount. www.alljproducts.com/

[@tangledline]

Nice. With all that-Did you eventually go with HD CV axles? Also throw in some onboard air and a converter. I know..im late. The aux fan is def needed with an HD tranny cooler. Looks badass!

[@BackcountryRenegade]

I have not yet, and the axels have been fine. i do still want to do onboard air and lockers, but still havent yet. did a few other things since this so need to make another load out vid

[@tangledline]

@@BackcountryRenegade Looks nice. Looking forward to it.

[@jessejames7726]

Roughly what order did you mod things out? I want to go for a same style build from a stock liberty, but don't want to get ahead of myself and make mistakes in what order I go.

[@nathanlief]

Awesome video do you have a link for the tablet mount? Or brand?

[@BackcountryRenegade]

its kinds of self built but from various ram mount pieces I researched and put together. Here is the tablet portion of it. I can look up the other pieces if your interested .... amzn.to/3rF4ZZp

[@juanpabloalvarezferreira2037]

hello, good morning, excellent video, very good job and good project on your jeep liberty, I have a question. I have a 2007 jeep liberty. I put bigger 265/75R16 tires on it. I went to the beach and when I walked through the sand, the TRAMS TEMP light came on. but then the light went out, do you think there might be a problem with the transmission? Do you think it might break or is it something normal because of the force I exert, it only has 83,200 miles, I await your response and thank you

[@BackcountryRenegade]

did you regear once you put the bigger tires? if not that is probaly why. the stock gearing with bigger tires will put extra strain on it. So would need to upgrade to 4.10s. thats why i plan to do before i go bigger tires

[@juanpabloalvarezferreira2037]

@@BackcountryRenegade ok thank you very much for your advice

[@kobkfighter3203]

Where did you get your fender flares?

[@jeremiahrojas1368]

Hello! Merry Christmas you might not reply because it’s an older video however if you do I was wondering if you can help me find that inside rack from all Js I’ve been dying to have one!

[@BackcountryRenegade]

Merry Christmas. If you go to All Js and call them. They should be able to help you if they have more in stock they make an aluminum version and a steel version when I got mine. I know there was only one aluminum left. I’m sure it’s probably gone by now but they may have some steel ones left in stock. I know they were saying they were not gonna make anymore.

[@papaburgundy_]

When you added the Mamba wheels and 265/70 R16 tires, did you already have the front number? I have a very similar setup without the steel bumper, and bought some nice used Moab wheels with 265/70 BFG tires… they rub really bad on the front so we will need to mod the stock bumper to make them work. Curious if you needed to go through that process and if so if you have advice?

[@BackcountryRenegade]

i did already have the front bumper, i had to trim some of the plastic away in the wheel well other wise i would have had rubbing.

[@kitfisto1827]

Ipad mounted in front of your passenger side airbag?

[@papaburgundy_]

I’m curious if you looked at the Old Man Emu 1.5” lift kit? I just got one for my 2005 Jeep Liberty Renegade and it says I can run up to 31” tires. Curious if you think I would get rubbing on 265/75 r16? And if I could go larger or if best to keep it less than 265s

[@chrisyoder8429]

245/75r16 fit was about perfect on mine, no rubbing but very close on front at lock. 2004 kj

[@highdesertbadlandinggargam2432]

I’ve it looking at installing an arb winch bumper and winch. But also wondering if there more of a need to save weight and try my damndest to get a half bumper built. What would you recommend?

[@BackcountryRenegade]

it will depend on your suspension. If you have HD springs and coils like i have in mine, it will be able to handle the full bumper and winch. I suggest going with a synthetic line like i did will save weight that way. But the arb is a lot of steel, so a half bumper would save weight. I dont have those skills to build one so just bit the bullet for arb. If you have the skills id say go for it. some people also fashion wrangler bumper to their kj and make custom mounts for it.

[@highdesertbadlandinggargam2432]

@@BackcountryRenegade Yeah I’ve been trying to see about dimples here and there but it’s going to be on the outside and unless I can really seal the areas odd I’m thinking that route really won’t save much weight.. Thanks for the reply.

[@hertbertbrand7063]

Where did you get the adjustable rear sway bars and the front adjustable sway bar links

[@BackcountryRenegade]

I deleted my sway bars in the rear, but I have adjustable rear lower control arms also from Iron Rock Off Road. The sway bar disconnects in the front are from jeepin by al, but he doesn’t make them any more

[@johnmar4336]

Would you mind providing a link for the all J's inside rear aluminum cargo holder? I can't seem to find it (8:50)

[@BackcountryRenegade]

yes ill be adding all the links to the parts in the description today. But for All J's they took it off their site, since they stopped making them. They have a few left and you have to contact them directly. www.alljproducts.com/

[@tomthumb2815]

I would do a straight axle front conversion. The front suspension on liberty is very questionable with bigger tires lift and weight. That's all that platform needs is a straight axle to be serious

[@BackcountryRenegade]

That would be ideal but not really a option for me

[@danielfox9510]

Can you tell me about the fender flares are the stock? I can't find any that looks like yours

[@BackcountryRenegade]

Thanks, these are stock fender flares that came with the renegade models

[@haydnbrittain5197]

Do you know if I can fit grand Cherokee rims on the liberty?

[@BackcountryRenegade]

Depends on the lug pattern, I was able to fit these Moab style TJ rims on mine

[@Josh-bj1hw]

how do you stop the rear glass hitting the spare tyre ?

[@BackcountryRenegade]

with 31s it doesnt hit. However when i upgrade to 32s or 33s it likely will. I have a spare tire extension that I got from Rocky Road Outfitters that moves it away so the window can open freely.

[@madman432000]

that rear tray is interesting, I would like something like that for mine. Since you are in WA as am I, if you want to get rid of it I would be interested. 🙂🙂

[@BackcountryRenegade]

I got it at All J’s in Big Bear. If you call them and ask for the custom liberty rear tray they may still have some in stock. Mine is aluminum which I know they don’t make any more, but they may still have some steel ones. Here is their website www.alljproducts.com

[@madman432000]

@@BackcountryRenegade I messaged them and got response that they may have a couple in stock but she will have to check for mounting brackets.

[@BackcountryRenegade]

@@madman432000 awesome. Let me know if you get one. Even if they don’t have the mounting brackets I would get it if they have one. It is easy to customize something to install it

[@madman432000]

@@BackcountryRenegade FYI they had 3 in stock so I got one, they had just enough mounting brackets. The ones they have are aluminum, no steel ones left.

[@BackcountryRenegade]

@@madman432000 very cool. The aluminum one is much better than the steel on because it saves you weight in the back. How much was it?

[@monzerps4177]

How many inches has your car been lifted?

[@Rad_B_OLand]

So when is that rooftop tent review coming?

[@BackcountryRenegade]

Im going to try to get it done mid June. I have several trips planned where I will be able to film it.

[@user-kb4hb9ks3h]

Engin L 3.7 w6?

[@fabioo.velazquez4468]

Where did you find the extended breake lines? I can't find them anywhere.

[@BackcountryRenegade]

they were made by JBA, but they dont make them any more. I have a set from them of 2in extended beak lines, used for a month, but should work fine for up to a 3.5 in lift. i could sell them to you if your interested.

[@timbriese7092]

👍🏼👍🏼👍🏼 Where did you get the Aluminium rack?

[@BackcountryRenegade]

All-J's in Big bear, CA. They may have a few more left

[@Rad_B_OLand]

To bad you didn’t do a video on the shelf install.

[@BackcountryRenegade]

yeah bummer, wish i would have done that

[@Rad_B_OLand]

@@BackcountryRenegade So is it just the plastic holding it up?

[@BackcountryRenegade]

@@Rad_B_OLand no bolted to the frame

[@bobbyboyles6424]

Your up in Washington state do you belong to any Jeep clubs up there? I live in Northern California. I have a 2006 Jeep Liberty too. I would love to build it up like yours.

[@BackcountryRenegade]

thanks! glad it could inspire you. more vids to come on it. im not part of any jeep clubs yet, but i showed look into it

[@omarjones1460]

I have an 05 liberty. I just purchased the RRO rails. Looking for the underside protection. Where did you find that stuff?

[@BackcountryRenegade]

I got my front skid plates from Jeepin By Al before they discontinued them to focus only on A arms. The other plates came stock on the renegades, but they are not as beefy as the JBA ones. Check u pull it junk yards for some off renegades. Maybe get lucky and find some JBA ones. Skid row also makes some I hear.

[@johnsebastianbach]

Skidrowoffroad sells plates for KJs, I just installed their front skid on mine, it's really nice.

[@omarjones1460]

@@johnsebastianbach Thanks. I'll look at them.

[@Rad_B_OLand]

It’s more sleek than the iKamper? Did you compare to the iKamper?

[@BackcountryRenegade]

Yes I did. Side by side infact. Ikamper is wider and taller when closed on the car, which for my car already being smaller and narrow would stick out more. Plus the condor has more room when opened since the front floor does not narrow like the ikamper. I still like the ikamper but those things plus the money savings had me go condor. But quality wise the ikamper is a bit above, but comes at a premium. Both great tents though

[@michaeleifergodfamiliehund2498]

Where did you get the fender flares?

[@BackcountryRenegade]

they came standard on the 2006 renegade model

[@078argenis]

Hi. Front bumper is for liberty??? O wrangler ???

[@BackcountryRenegade]

It’s an ARB bumper got the Liberty, link in description

[@slaterbates5008]

Do you have links to the front bumper and lift?

[@BackcountryRenegade]

The front portion of the lift is not made any more, but its the adjustable coilovers from Jeepin by al. Here are links for the rear extended length OME shocks : www.rocky-road.com/jeep-liberty-ome.html Rear Springs: www.rocky-road.com/jeep-liberty-coil-springs.html

[@slaterbates5008]

@@BackcountryRenegade thanks so much!

[@hello_youtube_318]

What fender flares did you use?

[@BackcountryRenegade]

teses come stock for the renegade models for 05-06

[@hello_youtube_318]

@@BackcountryRenegade ah ok. Thank you. I did a 02 jeep liberty build and had to remove the fenders/cut about 3 inches higher to make room for 33s. I have been wanting to put some back on. Relocating the rear fending, I had to cut Into the door. Looks unfinished.

[@BolotohodBalu]

Hello, very cool jeep. Im from Russia. Where are you from?

[@BackcountryRenegade]

Awesome. Thanks!

[@1981cb750f]

Where did you get the armor plat from?

[@BackcountryRenegade]

Jeepin By Al made it a few years ago but since stopped making it as they focused only on A-arms now

[@1981cb750f]

@@BackcountryRenegade nice build. It's hard to find mods for them. I may just need to get some made. Thanks for the reply.

[@BackcountryRenegade]

@@1981cb750f your welcome. Be on the look out for a new vid update soon. Had a lot of changes since. I’ll also have links to some comparable parts

[@papaburgundy_]

What size tires are on your KJ in this video?

[@BackcountryRenegade]

I’m currently on 31s but have plenty of room for 32s so will probably do that when these wear out

[@papaburgundy_]

@@BackcountryRenegade are they 245s or 265s? Other? They look good

[@BackcountryRenegade]

@@papaburgundy_ 265/70r16

[@user-ib8tx5ld7z]

كيف يمكنني ان احصل على الخيمه

[@CalebSTACHECarter]

Where did you find your extended brake lines?

[@BackcountryRenegade]

From jeepinbyal.com I don’t think he has them for sale any more. I have a extra set of jba extend break lines good for up to 2.5 in of lift I can sell if interested

[@CalebSTACHECarter]

@@BackcountryRenegade Unfortunately I'm doing the Rockfather lift by rocky road outfitters at 3". I did order the Iron Rock A arm though. Do you think 32" tires is a better fit on the Liberty, because I'm torn between 31s and 32s

[@BackcountryRenegade]

@@CalebSTACHECarter they will work fine with 3 in lift. Plenty of room for it. I’d start 31s and make sure u have correct backspacing and trim. Then I can go up from there if u have room. Avoid wheel spacers and a spacer lift

[@CalebSTACHECarter]

@@BackcountryRenegade Yeah I'm definitely not doing spacer lifts or wheel spacers. I'll message you on Instagram about the extended brake lines.

[@syedemranhoque604]

What’s your tyre size?

[@BackcountryRenegade]

these are 31s (265-70r-16) i plan to go to 32s or 33s next

[@syedemranhoque604]

I literally just picked it up about two hours ago lol and I am extremely inspired with the look you have. The plan is to add a winch bumper and the big tyres. But this is all new to me. Was wondering if you could guide me. P.s I’m from the UK

[@elwhastrummer]

Rialto Beach?

[@BackcountryRenegade]

Close, I was camping at Kalaloch beach

[@elwhastrummer]

@BackcountryRenegade Raised in Port Angeles, I've been to the west end a zillion times, spend many summers out at Hoh River, and when I was a Boy Scout I hiked all through the Olympics. Those ocean beaches are awesome, any time of the year.

[@BackcountryRenegade]

@@elwhastrummer truly is a beautiful area. I need to get out to the coast more often.

[@boralaviagem]

Whats your tire ?

[@BackcountryRenegade]

these are 31's duratec 265/70r 16. Planning to go at least 32s next maybe 33s if i can fit them.

[@Dopek69]

@@BackcountryRenegade Hi! Great build! Do you have trouble with rubbing tyres? Thank you

[@BackcountryRenegade]

@@Dopek69 no rub after i pounded the pinch weld and melted and smoothed the plastic it was behind

[@Dopek69]

@@BackcountryRenegade Thank you for your answer! Great build! Congratulations! Got inspired for my build

[@kmoecub]

Repeat slowly after me: YAK-Ih-Maw. Again: YAK-Ih-MAW

[@BackcountryRenegade]

😂

[@kmoecub]

@@BackcountryRenegade Sorry dude, but I did grow up nearby. Mispronunciation of native place names is a a pet peeve, even when the place name has been anglicized

[@cjune21]

This is a brokeback cowboy see them sandals

[@michaelfraser5723]

Throwing cash at it. I hope it appeals to Google.

[@user-db7xq3tq3c]

Cool build, such a waste of money😂