Jeep Wrangler JK and JKU LED Tail Lights Install

[@zachtuk111]

Saw the video for the lights I wanted for my JKUR, and bought the smoked ones. Great work! Subscribed!

[@justinconley7978]

Thanks for showing the reverse lights in the video. Very bright looking. I’m going to buy them just bc of brightness.

[@KamiMountainMan]

I like the fact how easy plug and play these are. Just wished these were smoked lens instead. Also one other thing I want to know before purchase is if these lights cause any issue with my 7-pin trailer wiring.

[@tybonez3646]

They should NOT cause issues with your trailer wiring, but I do not have trailer wiring to test.

[@KamiMountainMan]

@@tybonez3646 I hope so. I ordered them and I will check them for any issue. The reason I asked was because I had issue having both original 4 pin connector and the Mopar 7 pin connector. The right turn signal didn't work for me. Later I found out this is an issue when you keep both connectors and so I removed the 4 pin and everything went back to normal, so it seems the wiring in Jeep are really sensitive to even small changes and some functions may not work properly. I will let you know If the new lights caused any issues.

[@tybonez3646]

Yep, probably because the entire Jeep is run on a CAN bus system. Installing hardtop wiring and backup camera required programming of the Jeep. One thing I will not with these tail lights are the screws did surface rust (PA salt) I took them out, bedlined them, then put some fluid film on them and now they are fine. May be able to just change them from your old lights. Also after washing they had some moisture in them but always cleared within a few hours. I relayed this to the seller and they were in contact with the manufacturer. Not sure if they have made changes to them or not, but just a heads up

[@KamiMountainMan]

@@tybonez3646 I installed and checked the lights, I found no issues with my trailer.

[@tybonez3646]

Kamyar Miremadi glad to hear everything works!

[@soberbyker]

What brand lights are they? I watched a couple of times and didn't hear the brand. Also are you still happy with them? Any condensation?

[@tybonez3646]

soberbyker they are lx-light. The amazon link to them is in the description of this video. I am still happy with them. I do get condensation sometimes when I wash it but it goes away quickly. I contacted them and I believe they were sorting that out with the manufacturer. I had the screw surface rust, but I took them out and painted them with Bedliner and then lubricated with fluidfilm. Any aftermarket tail light I have used I have had to do this.

[@billyoung7758]

@@tybonez3646 OK thanks, after I asked the question I did find these on Amazon, but under a few different names. LX ... SPL .... COWONE ... etc

[@tybonez3646]

Bill Young lol I see that now. I’m sure they are all the same, but I’ve personally had the best service with LX-light.

[@DominicWolfe]

I’m considering buying these, have any of your tail light or headlight bulbs burned out on you?

[@tybonez3646]

I have not had any issue with burnt out lights, but I am constantly changing styles of lights every few months to give a new look.

[@DominicWolfe]

Okay, thanks for replying!