Want to run 37's on your 392 Wrangler? Here is everything you need to know. Bump Stops: jksmfg.com/products/jl-adjust...
Пікірлер: 25
@graywolf.overland4 ай бұрын
Most youtube videos never showcase how you get the best out of stock suspension and build low CG rigs. I have a 2024 4xe Rubicon. This video is a good indication that a mopar 2" lift (which is more of a 1.5" on a 4xe) should be good enough to run light 37 c-rated KO2s on a 5.4 backspace wheel to keep the scrub radius near to stock spec. Thank you for not being just another youtuber pushing a popular lift kit and a $5000 upgrade bill to wheel a wrangler rubicon ❤
@adrianw39853 ай бұрын
Pretty sweet Jeep. My V8 land Cruiser gas milage sucks too, I think that's just par for the course with V8's.
@JeepinBailey6 ай бұрын
Good content Ali. I still have my 2.0t and enjoy watching the 392 stuff. 👍🏼
@shiftintosunshine3 ай бұрын
Great video! Targeting Aug/Sep for purchasing a 392 w/37s so... perfect advice. Thank you.
@Verb1305 ай бұрын
It was your content that gave me the confidence to go with the Icon Alloys Rebound Pro 17x8.5 -6mm wheels, and Nitto 38X12.50R17 with only a 2" Dynatrac lift kit, on my JLU Rubicon. After some hard wheeling bottoming out my rear axle on the Dynatrac rear bump stops, the only thing I had to do was add an additional 3/16" plate to the rear bump stops and problem solved. Thank you for your content. It has really helped me make some good decisions.
@Ali_Mansour_Editor5 ай бұрын
That’s awesome to hear! Thanks for watching. I appreciate it.
@cmwilfred3 ай бұрын
Great informative video. Especially for me as I’m planning to keep the “24 392 stock. But just put on “37 tires. 2inch rear bump stop for me 🫡
@user-ks3pm3tf3r3 ай бұрын
Great video, question, if I want to keep 2021 factory wheel will a 1 inch spacer work?
@user-ks3pm3tf3r3 ай бұрын
Awesome video very informative. Question, will a 1 inch spacer work with the 2021 factory wheels?
@Ali_Mansour_Editor3 ай бұрын
I don’t know if you can actually get a 1 inch spacer for the JL. For some reason I thought 1.5 was the smallest you could go. Either way, yes, you can run a spacer with a factory wheel. It’s a little on the narrow side for a 12.50, but plenty of people do it.
@user-ks3pm3tf3r3 ай бұрын
@@Ali_Mansour_EditorThanks for getting back with me, I found 1" spacers for JL on eBay. I also might go with nitto trail grappler 37x11. 5x 17
@sids20124 ай бұрын
You mention better fuel economy with the 37x12.50 grappler tires, how much better though?
@Ali_Mansour_Editor4 ай бұрын
A touch under 2mpg better with the Recon Grapplers.
@sids20124 ай бұрын
@@Ali_Mansour_Editor that’s quite a bit! I’ll probably try them as soon as I get my 392! Thank you
@22ghost3925 ай бұрын
What length are the fox DSC you have on the green 392?
@Ali_Mansour_Editor5 ай бұрын
They are the 2-3 inch lift height ones. Part #'s 883-26-050 and 883-26-054. Note, the front ones allow the driveshaft to hit the crossmember. So, you'll need to unbolt it (which is what I did) or get an aftermarket front driveshaft. If you don't, it will rip the boot on the shaft.
@aristotlefullthrottle95673 ай бұрын
With the XR set up would 13.5 wide 37’s work or only 12.5?
@Ali_Mansour_Editor3 ай бұрын
It's depends on the wheel's backspacing and if the tire is true-to-size. I think you could probably make it work, but it may rub on the inside plastic of the fender. Probably not enough to pull the fender off the Jeep on the trail, but enough where you would hear it.
@DUNEATV5 ай бұрын
Umm how did I not know you had your own KZbin channel???
@Ali_Mansour_Editor5 ай бұрын
Probably because I haven’t really done much with it. I’m trying to get more content on it. That’s my resolution for 2024!
@DUNEATV5 ай бұрын
@@Ali_Mansour_Editor well, I think your videos are the best ones on the driving line channel so you might as well put the effort into your own channel. It would probably grow bigger than theirs anyway.
@Ali_Mansour_Editor5 ай бұрын
@@DUNEATV That's kind of you to say. I'm excited to see what I can do with the channel. I will still be doing videos for Driving Line as well. It's wild how big that channel has become. When I started uploading videos for them it only had 29 subscribers!
@DUNEATV5 ай бұрын
@@Ali_Mansour_Editor Well I think you should go for it…and I guarantee you I’m not the only one! 🍻
@mariodelrosario95785 ай бұрын
Does it matter if it's a 392 or a v6 extreme recon.
@Ali_Mansour_Editor5 ай бұрын
It does make a difference. The 392 has a different bump stop tower up front which is longer and has a 2-inch lift. The V6 equipped JL with the XR package only has a 1.5 lift and the standard length bump tower up front.