Adding Driveways to a Civil 3D Corridor using Minimal Targeting

Adding Driveways to a Civil 3D Corridor using Minimal Targeting - Pt. 2 of 3

Рет қаралды 28,617

Jeff Bartels

Күн бұрын

Пікірлер: 23

@joealwin2653 3 жыл бұрын

Impressive walkthroughs...thanks!

@MrRich-ix6ur 3 жыл бұрын

good job engineer, thank you very much.

@JeffBartelsCAD 3 жыл бұрын

You're welcome! Glad to hear the content is helpful!

@joshreiner3362 2 жыл бұрын

Great walk through on this workflow Jeff!! I am running into an issue with the corridor saying it is out of date once I set the back of curb transition target to the feature line. Is this something you had occur as well?

@joshreiner3362 2 жыл бұрын

I found that the difference was I was using a feature line versus a 3d Polyline. The benefit of this is that the Featureline automatically updates if adjustments are made to the profile whereas the 3D polyline doesn't. I am also putting the featureline at the flowline instead of the Back of Curb. If a featureline is used at the Back of Curb it continues to lower futher and further each time the surface is rebuilt.

@WesAshworth 7 жыл бұрын

Great video! Why do you need a left and right driveway block? Won't a single block work, just rotated? Thanks

@andykeller4983 7 жыл бұрын

The left and right driveway blocks would be identical except for layers. The difference in layers helps when he does the targeting for the left or right Driveway Horizontal.

@nevienvalenzuela5517 2 жыл бұрын

Why wouldn’t you just use corridor section editor to depress the curb at the driveway. Isn’t that a lot easier?

@fazioconsulting 2 жыл бұрын

Jeff, I am using civil 3D 2022. Is there a sub assembly for doing driveways like this? Or do I have to figure out how to create one?

@JeffBartelsCAD 2 жыл бұрын

Hi Ryan, No out of the box assembly. With The included Subassembly Composer however you can create most anything you need. In part 1 of 3 I walk through the custom part I made for this purpose. I’ve also created a series that walks through how to use Subassembly Composer on my channel.

@mariusz7161 3 жыл бұрын

can I do something like that with a subassembly included in civil 3d? Or i need composer?

@maciasj04 3 жыл бұрын

This might be late and you have already probably found a workaround, but I just found out that my company has 2018 AutoCAD Civil 3D Version 2 and in it there is a Driveway subassembly. I'm not sure what version you have, but in the Toolspace, under the Toolbox tab it may be worth checking to see if you are able to incorporate that subassembly. Jeff also has a tutorial in incorporating Service Pack Subassemblies into your Tool Pallet. I hope this information helps you a little.

@Bilal-lc7jq 4 жыл бұрын

jeff can u to remove cut area from corridor while driving over, something related to surfaces. Thanks

@Bilal-lc7jq 4 жыл бұрын

so i can bring that to 3ds Max with trimmed cut area

@SB-ne1se 6 жыл бұрын

Excellent video. The presentation and your description and word use are flawless. Did you write out your words beforehand and read them as you did the presentation, or is this how you always talk? I just subscribed, looking forward to learning more.

@JeffBartelsCAD 6 жыл бұрын

S Bahr Thanks for the kind words, you made my day. I don’t script the demos (with exception being the first and last sentence to help with the “take off and landing”). The rest is how I normally speak. I do tend to misspeak a few times during each recording. I just edit those phrases out so you don’t have to suffer through the off the wall statements that I occasionally make :)