Dryer Won't Heat Up Or Dry Clothes - DIY How To Fix Heater In 2024

Your clothes dryer Won't Heat Up? Samsung dryer not heating and your clothes dryer won't dry clothes? We'll show you how to replace dryer heating elements when you find your dryer not heating. With a dryer not drying well your root cause is going to be a dryer heating element that has gone bad. So you'll learn DIY dryer heater element replacement for this Samsung dryer, including testing and measuring the correct ohms resistance for your dryer heating element. This is a Samsung Dryer, Model DV42H5200EF/A3, it's a good time for a dryer vent cleaning at the same time that you debug your Samsung dryer not drying. If you don't have a dryer vent cleaning kit get one, or soon you will have a clothes dryer not drying clothes.
📺 WATCH: Top 5 Causes: Dryer NOT Heating Up/Drying Clothes: • Top 5 Causes: Dryer NO...
Samsung Dryer Parts mentioned in the video: (Paid affiliate links, thanks for your support!)
💲 Samsung Dryer Heating Element DC47-00019A Kit w/Thermostat: amzn.to/2TEJ4kp
💲 Dryer Exhaust Telescopic Periscope Kit Whirlpool 8171587RP: amzn.to/38utZay
💲 Fluke 87-V Digital Multimeter: amzn.to/2LK8etM
💲 Klein Tools MM400 Multimeter, Auto Ranging: amzn.to/38uwucS
💲 Milwaukee, 2415-20, Cordless RA Drill, 12V, 3/8 in. amzn.to/3czTbj9
💲 Milwaukee 2415-21 M12 12V 3/8" Right Angle Drill/Driver Kit amzn.to/38qhm0m
00:00 Repairing Clothes Dryer When it won't heat up
02:04 Take Apart The Dryer
08:16 Removing The Dryer Heating Element
10:15 Testing The Dryer Heating Element
17:54 Install NEW Heater Element
22:11 Assemble Dryer Back Together
24:45 Cleaning Lint Filter
25:17 Checking Gooseneck Vent Outside, Confirm Dryer Blowing Hot Air
Note: Some of the links we send you to are affiliate links like Amazon and The Home Depot, which if you click on them and buy something, we may receive a small affiliate commission. We appreciate you supporting our efforts to continue to bring you word class tool reviews, remodeling, and repair videos, and shop with me videos looking for the best discount tool deals.
How To Fix A Dryer Heater DIY style
Is your dryer not getting hot? Here is the most common fix. If you don't own a dryer vent cleaning kit, and you don't clean out your dryer vent tube every year, you are asking for a clog, and possibly a house fire. The "dryer not getting hot" problem will manifest itself in your dryer not drying your wet clothes. Maybe you'll notice the dryer not getting hot. Even if you got your dryer vent cleaning tools, and quickly learn how to clean a dryer vent, it might already be too late with no dryer heating, chances are your dryer heating element needs to be replaced now to solve your dryer not heating problem otherwise no amount of dryer vent cleaning will help you now, although you still need to clean the dryer vent tubes, and vacuum all the lint out from inside the clothes dryer, which accumulates throughout the year.
dryer not heating Samsung
Now of course this is a Samsung dryer, and although the taking apart of the dryer might be different than other brands, they all essentially pull apart similarly, and once you get inside, the procedure and location of the dryer heating element are the same across most brands, as is the testing methods, only the part number of the heating element changes.
If you have a dryer not heating up, the most common cause is the dryer heating element has gotten so overheated that the coil broke, and now you have an open circuit. Now you have an expensive dryer repair on your hands, and you must replace the broken dryer heating element. So if your dryer is not working, this video shows you how to replace the dryer heating element and get you back up and running and drying clothes again. Be sure to use the dryer vent cleaning tools in this video.
dryer heater element test and replacement
This video also shows you how to perform a dryer heater element test, as well as testing the thermistor and thermostat which measure the heat coming off the dryer heater element. If you have the dryer not drying clothes situation, you need to pull out the dryer heater element for the test, that's the only way to test and repair the dryer heater.
Samsung dryer not drying
These Samsung DV42H5200 series dryers are quite a bit of tedious work to get at the heating element. Once you extract the heating element from the dryer, now you have to remove 9 screws and twist 4 tabs to open up the heater element housing.
Once you DIY install your new dryer heating element, you will not have a dryer not drying well anymore. Just be sure to clean those dryer ducts and dryer vents at the same time.
#dryerheat #samsungdryer #jeffostroff

[@jeffostroff]

💲 Samsung Dryer Heating Element DC47-00019A Kit w/Thermostat: amzn.to/2TEJ4kp 💲 Dryer Exhaust Telescopic Periscope Kit Whirlpool 8171587RP: amzn.to/38utZay 💲 Fluke 87-V Digital Multimeter: amzn.to/2LK8etM 💲 Klein Tools MM400 Multimeter, Auto Ranging: amzn.to/38uwucS 💲 Milwaukee, 2415-20, Cordless RA Drill, 12V, 3/8 in. amzn.to/3czTbj9 💲 Milwaukee 2415-21 M12 12V 3/8" Right Angle Drill/Driver Kit amzn.to/38qhm0m

[@SouthBaySteelers]

wanted to let you know Pro Appreciation week is coming - March 23

[@jeffostroff]

Any good deals you know about?

[@SouthBaySteelers]

I haven't had time to look.

[@clsybtrfly]

We have a samsung and have replaced the heating element twice in a month then found some sensors that aren’t all on the element were bad so we replaced them. We snaked the dryer vents out with a tool like you have and our drill , got a ton out. Well the dryer worked great for 3 days and back to not heating up. Guess we will have to buy a new one because it’s not the element or sensors we found. At a loss now

[@roccobollotta2277]

I followed the video perfectly and all went well. Just one thing strange, ohm test checked good on all the prongs on the old heating element after removal and the coil though mostly black was not broken, I did find the plate cracked exactly in the same place as the one in the video. So I went ahead and changed everything that came with the kit, including the Thermal Fuse and the Thermostat. After I thoroughly cleaned the interior I could get to of the dryer, and thoroughly cleaned the lint vent all the way to the roof I reinstalled the complete unit. After installation everything worked perfectly, dryer is heating well as new again. Why it stopped heating when ohm check checked good is still a mystery unless the crack in the plate holding the coils was a factor.

[@kristensavage7360]

Just want to say THANK YOU! I'm a mom and when my dryer went out I was ready to cryyy (we had our vent cleaned so I knew that wasn't the issue). I found your video and thought okay, this is crazy but I'm going to do it. I DID IT!!!!! I haven't been this proud of myself since childbirth 🤣🤣🤣

[@jeffostroff]

You are so welcome!

[@babstering]

I have the same feeling cause I did it awesome video

[@opheebop7632]

Lol the end

[@lupejeffe6047]

Ima father and I feel how u feel 😂😂

[@Tiddliwinkz]

Girl power 💪yessss! I know that feeling as I was in the same situation with my washing machine drain pump. It went out and I wanted to cry, but I successfully fixed the pump and have been on fire fixing things ever since. I was a little bit nervous about the dryer as I have only changed the cord and nothing more, but after reading your comment and with the help of this video I have all the confidence in the world that I will be able to accomplish this task. Thanks so much 🙏

[@annhatch4326]

Absolutely THE BEST How-To video I've ever seen! I'm a 56-year-old woman, and just finished replacing the heating element on my dryer! If you're not a teacher, Jeff, you missed your calling...Thank you!!!!

[@jeffostroff]

Thanks Ann, glad you liked it and Glad it helped!

[@Gulfcoasting]

I just can't thank you enough! I'm a 56 year old little lady and I repaired my dryer for $23! Your video was perfect!

[@jeffostroff]

Awesome, glad to hear you were bale to fix this yourself!

[@Alycanj]

56 year old Honey Bear...

[@lorimav]

I am 61 and would not attempt this but I appreciate the information about the annual cleaning of the vent, the link to the brush, and the information about proper venting. That alone was worthwhile. I know someone who did have a dryer fire.

[@Postsforlife]

You sir, have allowed me to fix my dryer within twenty-four hours, and clean out my wall vent like a champ. Didn’t cost but $30 for the entire heating element unit and $18 for the vent brush. You’re a saint and a life-saver; the folks at my local Samsung wanted to charge me $100 just to come out. God knows what they’d charge after parts and the time it took them.

[@jeffostroff]

Thanks, I'm glad you liked it!

[@mluc1111]

Honest person will charge $200 , dishonest $500

[@daviddenison2097]

Where did you find parts???

[@jerkel]

@@daviddenison2097 you can get a replacement on amazon, just look for the parts number on the coil heating metal plate. it's around $25+ depending on shipping

[@daviddenison2097]

@@jerkel Hi love one. U R right except the one I saw is $245. Is there knock off brands I missed?

[@colleenmcquade8294]

I've never stumbled upon a do it yourself repair video that actually made sense and felt like I could do it, thank you! I was able to fix my dryer myself and felt confident that it was done right. Thank you!

[@jeffostroff]

Glad it helped

[@kanchr7537]

Thank you, Jeff . Husband and I did it together and it was more of fun , with no frustration at all. Thought we would end up yelling on each other and would mess up somewhere along the way. You were so patient with all your details. Just amazing.Thank you/

[@cwilson61309]

THANK YOU!!!! I was able to fix my dryer MYSELF!!! Never have fixed any appliance before! My teenage boys now know they have a FIX IT Mom!! LOL

[@shellieshelliebobellie7776]

Jeff you are our SUPERHERO!!!! we felt empowered and did the fix ourselves....Thanks for helping us learn and feel confident in what we were doing. Might not have been the right fix... but we were confident that we would be able to find the element and put it back together. It WAS the right fix. And now it works again. You rock!!!!!

[@yolandasolis2718]

Yay! I did it! I replaced the heating element in my Samsung dryer after suffering for 6 months having to hang clothes outside everyday. Thank you so much! Your video was so clear and precise and I followed it, step by step. I also bought the Klein tools meter you recommended to make sure the other parts weren't failing. I'm over joyed and feeling so accomplished. If this woman can do it, anyone can do it! Just follow Jeff's video and you can't go wrong.

[@jeffostroff]

Awesome Yolanda, congratulations on getting that done yourself.

[@juanch2031]

What is your model dryer. How you order thanks

[@yolandasolis2718]

@@juanch2031 My Samsung dryer Model # DV393ETPARA/A1. I purchased the heating element on Amazon from the Brand: DOK Parts Best. I don't know the direct link to it. I also purchased the Klein tools meter recommended in this video. I wanted to check before assembling everything back together. The meter will help you with other projects, too. Seven months later, the dryer is working well. To avoid any mistakes in re-assembly, I took pictures of every part or wire I disconnected. I referred back to the pictures and video with every step. This is by far the best step-by-step video I have seen for this. Thank you Jeff.

[@romanasky6820]

I'm about to try this. I'm a grandmother. But I think I can do it, Yolanda! It is worth a try. :)

[@tonymaiqi5337]

Yolanda, is your dryer not generating heat at all? or there is still little heat generated before you fix it

[@kgreene3047]

I’ve been watching DIY KZbin videos for 3 years and this is the first one I’ve commented on. That was the best fix it vid I’ve seen. Everything was exactly what I dealt with and I went right thru. I got it all fixed up super fast. Thank you very much!👍👍

[@jeffostroff]

Glad it helped Kevin!

[@JamesTFaile]

I completed this repair successfully on my first attempt thanks to you (and cleaned out my exhaust vent pipes, too). *Great* video. You're an excellent instructor.

[@gavingreen5031]

Super helpful video that goes into great detail. My model was slightly different, but the information he gave was a great step by step demo to troubleshoot the issue, and opening up the whole machine. The detail he showed in testing the existing heating element to show the closed and open circuits was great. Found the broken heating element and was able to replace. Greatly appreciated!

[@jeffostroff]

Great to hear Gavin!

[@tcmcintosh5256]

Best darn DIY vid I have seen in my 54 years! Thanks Jeff!

[@jeffostroff]

Wow, thanks!

[@tashamariestevens2269]

My husband and I just replaced the heating element in our dryer. We are beyond grateful for your expertise and willingness to share. The instructions were step by step, detailed, and clear. Thank you.

[@jeffostroff]

That is awesome!

[@dantruitt4294]

Jeff's step-by-step instructions were perfect. I was able to make the repair without a problem. He gave good details to keep from having to repeat work.

[@jeffostroff]

Glad to help Dan!

[@Mikerobertsonsells]

You are a great teacher. Thanks to you, no cuts on my hands, & no curse words. My dryer is FIXED.

[@jeffostroff]

Glad to help Mike!

[@smurfslayer10]

This is one of the best DIY videos I have seen! Great detail, you cover basic maintenance and the importance behind it. You rock! Thank you for taking the time to record this.

[@jeffostroff]

Wow, thank you!

[@stevenjerauld2352]

Thanks for making such a detailed, well made video. I appreciate all the little details and reminders you included. It shows your experience, and certainly gives us laymen more confidence to try a repair like this. Keep up the good work.

[@jeffostroff]

Glad it was helpful! thanks for watching Steven!

[@lorenziovelasquez5501]

A MILLION THANK YOUS !!! Today I got to fix my dryer and my mom couldn’t be any more happier !!! Thank you so much !!!!!!!!!

[@jeffostroff]

Glad to help Lorenzio and thanks for watching.

[@tonycabay6813]

Dryer stopped heating, searched and came across this video. Saved us HUNDREDS of dollars. Amazing detail showing how to take the part out, and how to put it back in. Ordered off Amazon witht the part number in the description, and it arrived the next day. Put it in, following this video, and we are back to wearing dry clothes. Cannot thank you enough.

[@amylane5573]

This video was extremely helpful! Thank you for the detailed step-by-step! My husband watched, re-watched, and paused along the way to a successful ending and a dryer that now works! Because of your easy-to-follow steps, we were able to work as a team and we both learned something new! Thank you for taking the time to make such a helpful guide!

[@tonymaiqi5337]

Amy, is your dryer not generate heat at all? or there is still little heat generated before you fix it

[@rpatel8978]

great video, no fluff, no auditioning, no bs...just pure info....i couldn't wait to add my comment so doing it while the dryer is still open on the floor, but I know that I am going to save the money for a brand new dryer or an expensive service call by following this video.

[@jeffostroff]

Glad it was helpful!

[@TortillaTheHun151]

This video along with the recommendations saved me from wasting money on buying a new dryer. Every penny counts and spending the money on this kit helped save me money for another project. Thank you!

[@mirandamackenzie2098]

I did it!!! Thank you so much for your step by step instruction. My first small appliance repair! Another mom, very grateful and proud of myself!

[@stevendelacruz3009]

Thank you so much! I have the same model dryer as yours. I went to your Amazon link and purchased it. Took 2days to get here and I just installed the new parts and it works!!!

[@jeffostroff]

Glad I could help! Awesome how many people have reported back that this helped them!

[@dansmith422]

Very helpful! I had trouble fitting the repaired heater enclosure into the round hole at the back after replacing and re-assembling. Kept falling out as I positioned the bracket underneath. Was made easier by attaching the bottom bracket back to the heater enclosure (after sliding the enclosure back into the dryer and reattaching wires) with the single screw on the tab of the enclosure, then positioning everything, and then securing the bracket at the bottom with the screws. Also, the heater enclosure has a tab that has to slide into a slot in the bracket, at least on mine. That threw me for a bit - again easier to attach them back together first, then position and complete the final re-install.

[@garrettchavez8156]

In less than 24 hours, this video helped me take apart my dryer, find the problem and fix it. 10/10 good sir. I owe you more than my views!

[@flyingant2557]

Jeff, thanks so much for the detailed service video. Was able to get it done the first time around with very little hiccup. My model is a Samsung number DV350AER XAA03. Only differences were the tabs on the front panel were a bit different and not as cumbersome to line up. And the major difference (which was a relief) is that the bracket holding the heater element casing didn’t halve the screws on the back that required the reach behind with the stubby screw driver. The bracket now just has the 2 screws in the front, and slots that the bracket slide into on the base of the machine. Dryer now working like a charm. I have a home warranty that would’ve covered it. But it’s an $85 service fee and a wait time for a service tech. The part cost me only $28 on Amazon and was delivered within 8 hours. Took me only a couple hours of work time in between smoking a brisket outside. Much thanks brother!

[@Dragonwitch42]

This was just perfect. Showed exactly what I needed to do an exactly which part was the issue. Thank you

[@jeffostroff]

You're welcome! Jay!

[@billdoutt4577]

Excellent video! Your advice was right on. The walkthrough had just enough detail but didn't get bogged down in banter. You described and linked exactly what was necessary for the job. Nice freaking vid! Just saved me a bunch. I think these heating elements are just low quality. My dryer is 4 years old, the vent is only a few feet long and was essentially clear and I clean the lint filter after every load. The plate was cracked on mine too, just like the one you showed. Anyway, thanks!

[@jeffostroff]

Glad it helped! On my old Whirlopool DUET dryer, they failed every 2-3 years. Probably don't last any longer unless you clean out all your ducts up tot he roof at least once per year. I get lazy and wait until my wife complains the dryer is not drying the clothes anymore, meaning heat exhaust is not exhausting out, so dryer overheats.

[@kris10tackles]

Thank you so much! We noticed our dryer wasn’t heating on Friday morning. I found your video and ordered the part within minutes. It arrived the next day and we were easily able to get it swapped out. No stress, no hassle, no having to wait for someone to come out. Thank you so much!

[@jeffostroff]

Glad it helped Kristen, and thank you so much for the $4.99 $SuperThanks!

[@jamesgoings]

Absolutely the BEST video I found. You eliminated unecessary steps and saved me hundreds of dollars for a repairman. Keep the great videos coming. Thank you so much.

[@jeffostroff]

You're welcome Jim!

[@CalebOhh]

Heads up, if you just unscrew the "bottom bracket" that you refer to at 9:26, you don't have to use your "stubby little Phillips" to blind unscrew the bottom bracket. You can keep the bottom bracket in the dryer and remove the heating element's housing. Great video, this was extremely helpful!

[@donknotts33]

That's fine you can get the heater loose but there's no way to get the heater out with that stand in place.

[@kirkj101]

I tried this but I couldn't do it on this model without removing the bracket. Is it physically impossible? Seemed like it to me, but maybe a professional could. I agree with his decision to show the process of removing the stand, but definitely good to know you can if you're experienced.

[@patrikschneider5993]

My forever tip I've got as an becoming engineer back in 1976, during studies was, that I always have to think about the one who works on any engine/machine with the screwdriver! I NEVER forgot about that! Had to smile about your brand related comments! But you find these genius everywhere..! Free translation from German wording: "Yesterday I did not know how to spell engineer, today I am one (of these)!"

[@jeffostroff]

Maybe these machines were not designed by engineers, but rather some people from marketing left over after the engineering team was laid off.

[@Rextrent]

@@jeffostroff Good answer!

[@SiegeTF]

I think they make it as hard as they can to encourage the use of servicepeople. There'd be almost no need for them if everything was easy to fix!

[@elizabethjoyce7817]

THANK YOU!!!!! You made replacing the heating element SO EASY. I got it repaired in about 2 hours, and that includes picking up the part. GOOD NEWS: I have a newer Samsung Steam Dryer and the metal platform that the element casing sits on does not have that back screw!! It has 2 slots that you just slide the back side into! Easy peasy!

[@ZZAAAID2]

What sets this video apart from others is the importance of checking electrical continuity of various components involved, not just the heating element. This way you can diagnose the actual problem. Last year I replaced the heating element using this video. This year the heating element has no problem, but the thermal fuse is the culprit. Thanks a lot!

[@saroumath6041]

The cheap heating element is probably the problem that I’d blowing out the fuse.

[@karenarcher3175]

Just sending a “high five” to you Jeff for a most comprehensive video that enabled us to disassemble, replace the element (which by the way had the element broken and the metal housing cracked in exactly the same place as the one you showed in the video), clean and reassemble very easily. Great step by step detail with clear camera shots! Thanks!!

[@jeffostroff]

Yes! Helped another one! Thanks for watching Karen!

[@deejohnson5163]

Probably engineered to break.......buy, buy, buy.

[@carlosluck1704]

In my case the resistance broke exactly on the same spot, with the frame cracked on the same spot, except that there was no obstruction in the exhaust duct that could cause overheating; we clean it regularly. Well, it's been in use for 7 years, so this might be just regular wear. I agree that it must have been designed with that weak spot built in.

[@Troy-Sheets]

@@jeffostroff Just repaired mine thanks to your video and it was also broken in the exact same spot. Thanks for the amazing video!!!

[@jazzchamp]

Add another to the list that was broken exactly the same way and fixed by simply following your video. Let me just echo everything that Karen and so many others have said! Superb!

[@murrayherron3893]

First class KZbin University how to video ! I cook booked it the whole way and got perfect results the first try. Excellent tutorial Jeff, much appreciated. We subscribed to your channel and look forward to our next project. BTW, there’s an air leak on the shuttle, we’re throwing your contact info their way.

[@jeffostroff]

I'd love for NASA to call me!

[@delclark]

Replaced the heating element and it works! Fabulous instructions! So thankful to JEFF !!

[@Sliminem04691]

Watch the video once and ordered the part from the link. I was able to install like a pro. No problems. My element look just like yours. It was broken in the same place and had the same crack in the metal plate. We have had our dryer for 6 years and this was the first problem. Thank you for the video!

[@jeffostroff]

Awesome Roy!

[@johnsaldarriaga5308]

Thanks so much for this video! I was able to disassemble the dryer and test all connections for continuity. While it actually wasn’t the heating element, I still had to take the same steps to determine that it was the thermal cutoff fuse. Ordered a new one on Tuesday, got it today, switched it out, and reassembled. Voila! We have heat in the dryer now! I agree with the previous comment about having a first aid kit handy. No matter how careful I was, I still managed to cut myself 5 times just because all the pieces are metal and pretty thin, so like razors everywhere. Also, be prepared for a harder time putting it back together - at least that’s how it went for me. Screws come out much easier than they go in. Same with the bracket. My Samsung didn’t have the two screws on backside of bracket, fortunately. And finally, when this man tells you to take good pictures of your wiring, LISTEN to him. I took pictures and still was praying I got it right when reconnecting. Thanks for the awesome video.

[@jeffostroff]

I cut myself too!

[@MrHermangv]

Yea my didn’t have the screws in the back bracket either so that help a lot, my heating element had a crack on the plate but not on the actual coils so am hope this fixes it

[@palawanbeans]

This video really helped me with the same Samsung dryer. Maybe you should make a video on what dryer to buy that doesn't require so much work like this Samsung.

[@jeffostroff]

They all do. My old Whirlpool DUET same thing.

[@torcan1990]

Thank you so much for patiently providing us step by step instructions on how to fix the dryer heating problem. Your steps were so easy to understand and I was able to fix my dryer, without having to go out and buy a new one.

[@jeffostroff]

Great to hear Rosshan!

[@lesleypicon]

We bought a used set which lost heat very quickly after purchase. You saved us a boatload, AND we had a fun project to do together. Thank you!

[@wlfe-cs5rb]

Perfect! Saved me tons of time man

[@jeffostroff]

Glad it helped!

[@mrchowdary]

Thanks Jeff. I was about to call Samsung service and do an expensive repair before watching your video. Could complete the repair under $25.

[@jeffostroff]

Holy cow, I'm getting 3 to 5 people day telling me the same thing, there must be a boatload of these Samsungs failing out there.

[@bilbusb]

@@jeffostroff these things suck .. i know 2 ppl with the same issue.

[@craigday9842]

90minutes start to finish. Jeff, thanks, very well done Video. I normally make jobs like this into an afternoon and evening but watched your video start to finish, gathered the tools, ordered the parts and then walked through the steps.

[@jeffostroff]

Glad you enjoyed it Craig!

[@thomasblackwell9507]

Sir; I now feel confident enough to attempt to repair my dryer. The amount of detail that you put into this video really made a difference. Thank you.

[@jeffostroff]

Awesome glad to help

[@russrockino-rr0864]

Hey Jeff! I just replaced the first heating element in my Samsung Dryer about a year and a half ago. The first element lasted about 8 1/2 years. You have to take several parts off to get to the element, but the procedure is very strait forward, as you show in your video. I also cleaned the vent pipe and now it is time for me to do it again. I only have about 6 feet of vent pipe to clean. I also replaced the lint screen at the time because it was torn and allowed bigger chunks of lint to get through. Thanks, Russ

[@jeffostroff]

Yes, keeping those pipes clean is the key to a long and healthy heating element lifespan.

[@jeffhitchcock3368]

Very helpful. I was able to TS the issue and found the heating element to be “open”. Thanks!

[@jeffostroff]

Great to hear! Did you replace it and get it working again?

[@jeffhitchcock3368]

jeffostroff part is coming in from Amazon sometime today.

[@RAWRdc2]

@@jeffostroff 0Ip

[@paularroyos2440]

@@jeffostroff w57

[@whitieford_rc948]

I worked on a bunch of these and almost evertime the issue ended up being in the board after replacing the element and the thing sky rockets up over 500 degrees when you start it 😳

[@tubethis777]

After searching on multiple channels, your comments, safety tips and filming were on point, thanks a bunch, best of kind.

[@jeffostroff]

Awesome, thank you!

[@Morghan129]

This worked perfectly! My husband and I just finished repairing the dryer and what a joy it was to turn it on and get heat! We used the link you provided to purchase the heating element gathered up all the tools required and set to work. By far the most difficult part was getting the screws out of the back part of the heating element then putting them back in...more awkward than difficult. You saved us a hefty repair bill as quotes ranged from $220.00 ca to over $300.00 ca. Thanks Jeff!

[@jeffostroff]

Way to go Glad it worked!

[@patrikschneider5993]

Following the video, this is perfect, just one point is missing! Add some band-aid to the workplace. All parts are sharp like a Swiss Army knife. Other than that, my wife's one is fixed, so I can use it again! Cheers y'all!

[@jeffostroff]

Awesome, glad to help Patrik!

[@daniellind6431]

I second that! Got a few cuts myself throughout this repair

[@TrukaLyf01]

Yes! You will definitely be cut lol...thx for the video!

[@marceloarreola2663]

Jeff - You are the man! I was able to replace my heater element within a few days going out and it was as easy as you made it look. God bless you, sir!

[@SusieC10]

THANK YOU 🙏🏼 so much, I have the same red Samsung dryer as in this video. We were able to repair it ourselves and saved a ton of money. I watched your video and was able to instruct my husband with every step. Thank you again. 👍🏼

[@ntekampe]

Not all heroes wear capes... that's all I have to say. Thank you 1000x

[@jeffostroff]

Thanks Nicholas!

[@proanswers]

Usually we see a code on the Samsung models (most not all depending if the temp sensor is driven by a circuit board: tS, t5, tC, tO, t0, tE, tE3, tC5, tCS, 1 tC, 1tC5, 1tCS, Extra Low light is blinking. * some units have a fault code that wont allow the dryer to start until the filter or vent is cleared. One has to ask are you getting no heat, low heat at high heat setting, just lo heat etc.- might not be the heating element coil. This is why we use diagnostic steps, basic electronic science and read a wiring schematic. VS most DIYERS and novices * even professionals shoot the parts cannon at the problem see what sticks (which is NOT diagnostic/critical thinking). HINT most wire schematics for dryers are taped behind or behind and inside the top control module (BONUS HINT on refrigerators there taped Behind the front grill, in the center or on the left side. Other common locations are on the left or right side by the condenser, or inside the refrigerator section inside the control panel)). Most show you the error code faults and most show you how to read the faults from there you can TEST the circuits, sensors, heating coils following the wire schematic to determine exact problem. If you cant test it you haven't found the problem. * like Jeff shows. Electric dryers are very simple machines (most are electron hogs) vs gas vs line clothes outside. IF I could recommend any purchase advise to consumers- STAY AWAY from all the sensor gadget features on a dryer (or washer or any appliance) you only need about 4-5 temp settings with todays clothes the rest of the crap manufactures throw on there is just plan nonsense i.e. sanitation settings. Dryer manufacturers use sanitation standards put forth by the National Science Foundation adding more settings and upselling is just marketing BS. Sure manufactures are thinking about a VIRUS sanitation setting.

[@jeffostroff]

The washer is smart and talks the app, but surprising the dryer does not, and no error codes appeared either which was surprising.

[@garymccall9573]

when should you see the error codes? upon start up? paused? is there a trick to get them to display?

[@proanswers]

@@garymccall9573 start up there should be a code display. Whats going on with your dryer?

[@garymccall9573]

@@proanswers it starts and runs but doesn't heat up. No codes on start up.

[@jrod1004]

Thank you Jeff for posting this very well-detailed disassembly video on how to troubleshoot & replace the heating element on the Samsung dryer. I have model: DV328AEW/XAA which was manufactured on Feb. 2008, and I'm glad I was able to get it working again, and possibly get a few more years of service out of it. I clean the lint filter just about every 2-3 cycles, so maybe that's the reason why it has lasted so long with the old/original element. I did vacuum and cleaned the interior once I had the dryer disassembled, as well as the vent port to make sure there aren't any blockages.

[@jeffostroff]

Thanks, I'm glad you liked it!

[@kennethpease6323]

Jeff, Thank you! Best fix-it video I've ever seen and the only one I've commented on. I purchased my heater element via Amazon which was $22. I overnighted it and it cost $38. Every detail of the job is outlined - even how to pull apart the connections which I usually lose patience with and ruin, get angry, cause more repairs and then spend more money. Great video that anyone can follow. I also took apart my vent hose and blew my power blower through it and cleared out the whole line. Agree with the one comment though, you will need some band aids!

[@jeffostroff]

Awesome Kenneth, glad you were able to make this repair!

[@lynseyc4513]

Looks like I’ll be replacing mine again it was just replaced last year. Samsung needs to do something about this.

[@jeffostroff]

A lot of time people blame their dryer. Mine was my fault because I did not vacuum out the vent ducts leading up to the roof, so it clogged, and super hot moist air remains in the dryer instead of blowing out the roof.

[@jackskelly6473]

Same. I replaced mine after 4 years of use. The new one from Amazon lasted 1 year. Fixing it again tomorrow. I take out the drum though. Easy to do and makes it so much easier.

[@johngirard6343]

Hi Jeff. Is this the same type of fix for a gas dryer by Samsung, model DV42H5000?

[@jeffostroff]

No, I don't think the gas models have a heating element, I thought there was a combustion chamber or something.

[@z3r0sky]

Saw multiple videos but yours get to the heating element quicker but it was a beating to get to assemble back. It was done. It was cut on same place too as in your video. You are a life saver 🎉

[@Need2Build]

Not only did you show each step crystal clear, you even went one step further and demonstrated how to diagnose the leads with a multimeter. Absolutely beaut! Cheers brother.

[@jeffostroff]

Thanks, I'm glad you liked it!

[@kingcast4510]

I took everything out just like you did and checked for continuity and everything seemed fine but when i put everything back together it still didn’t heat up... is there a fuse or anything like that? Or should i just buy a new heating element?

[@jeffostroff]

Well if everything else is fine I am wondering if there isn't something wrong with the controller board not sending the signal to turn on so the question I have is does your dryer support any kind of Bluetooth or Wi-Fi support to a Samsung app on your phone? A lot of people have this in their appliance and they don't know it but it can help determine what's wrong with your dryer kind of like reading your cars obd 2 port to find out what's wrong with the engine

[@kingcast4510]

@@jeffostroff No, it doesn’t have any type of Bluetooth or wifi

[@kingcast4510]

@@jeffostroff The thing is that when i put everything back together and turned it on, it actually heated up but It started smelling burnt and it only heated up for about 5 minutes and it stopped drying

[@kingcast4510]

So do you know what it could be?

[@erichernandez7072]

Did you ever figure out what went wrong? I just did the repair myself today and I had the same results you did...thinking I may have misconnected the wiring

[@MisterBinx]

Eh you just admitted it is the design that's at fault after saying it was the user's fault. The thermal fuse should open before there is any chance of the element breaking. It's a flat out bad design. A thermal fuse is much cheaper to fix than an entire heating element.

[@jeffostroff]

Sometimes the heating element can break simply from the stress of the heat several cycles of high heat before and the thermal fuse kicks in . Also we don't know that maybe there is flaw in the manufacturing I have had a number of people comment to me that their heating element cracked in the exact same place mine did I find that to be kind of coincidental. But yes when there's excessive heat inside the dryer it is our fault for not cleaning out the duct inside the wall and if you have blockages in there then all of the heat and humidity cannot escape out of the duct and out into the outside world, it stays trapped inside the dryer where it is constantly under high heat and the dryers are designed so that the heat is dissipating out the duct not being trapped inside the dryer

[@jjbarrientos88]

Agreed. Ours was perfectly clean and still died

[@crispimike5765]

We could not have done this without the help of this video. My husband and I are 70 years old and have always been very resourceful, but this was truly a job that was beyond our skill set. However, with your help we now have a working Samsung dryer that was purchased under 4 years ago. We remodeled in 2017 and purchased 4 brand new appliances. Of them, 3 have had issues and we still do not have the ice maker in our fridge repaired. We will never buy a Samsung appliance again. Thank you so much for putting this video online. The hardest part was loosening the screws and wiring clips. Lol! You are a gem!

[@jeffostroff]

Glad to help, and congrats on fixing that yourself!

[@CultofDeepSpaceDivers]

Hey man, I super appreciate this video and I appreciate you even more for doing it in the first place. 3 years later after you made this video here I am watching this video, step by step with this same dryer (grey color) and it's been out of commission for almost 3 weeks. You're awesome. Thank you so much. I seriously couldn't have done it without you.

[@wendyalderson6742]

Absolutely the best DIY video out of the hundreds I've watched. The reminder to take a picture of the wiring?! Brilliant

[@jeffostroff]

Glad it helped wendy!

[@coolhand727]

Thanks so much for your attention to detail and your well explained video. The crazy thing about this is the fact that my broken element had the break in the exact same place!! Second coil to the left of the retainer. And the base plate was cracked in the exact same manner. Thanks so much for saving me a lot of money by being able to do this myself. I appreciate it.

[@crystalruiz7042]

I followed this video step by step, and was able to change this part on my own, (someone who has very little experience in handywork!) Amazing!!! Thank you so much for saving me a couple hundred dollars on a repairman.

[@ramcentralstation]

Just watched again as a refresher. Changed mine 2 years ago and I have to do it again. Thanks for the great video

[@blackraen]

Thanks for this video, helped me all the way from opening up the dryer, to confirming the open-circuit on the heating element, as well as how to properly clean the heating channel into the drum. Need more of these kinds of help videos on KZbin.

[@jeffostroff]

Glad it helped

[@fluffyduck9153]

Right on the mark. Ordered the part upon watching this video and before opening up the machine. It is exactly the heating element. Thanks!

[@jeffostroff]

Glad it helped

[@davidadamus177]

A big thank you to you sir. I have a similar Samsung dryer which wasn't exactly the same model as this, but was able to test all of the electrical components with the help of this video and determined that the heating element was bad. Ordered a new one, installed it, and it's working well 😎

[@jeffostroff]

Glad I could help David!

[@csmtree]

Jeff, Thank you so much for making this step by step video. I just used it to replace my heater element (I have the exact same Samsung dryer). This was super easy and probably saved me over $1000.00, thanks!!!!

[@jeffostroff]

Awesome, glad it helped you

[@jimmydulanto7303]

I had my dryer quit heating and this video helped me fix it. Every step was just right. Thanks so much!

[@jeffostroff]

You're welcome Jimmy

[@alexanderaxt7522]

Thank you for this video! Was able to fix my Samsung dryer in 1 1/2 hours following your video and all for a $30 part. Really appreciate your thoroughness!

[@jeffostroff]

Way to go Alexander glad to hear you were successful and thanks for watching my video

[@prashanthurrynag3776]

I have a Kenmore dryer, which is made by Samsung and this tutorial was amazingly helpful😊. Thank you so much, you saved me a ton of money !

[@mrzbosshogg69]

Thank you so much!! We have not cleaned our exterior vent since we purchased three years ago. Again thank you for your detailed and informative tutorial, I'm glad we didn't have a fire before we knew about the regular maintenance. ❤

[@flubu33]

This was simply one of the best videos I have viewed, it was correct in the cause, used the link to order the part and once the part arrived, had it all put back together and operational within 1.5 hours. I can not thank you enough for the assist, subscribed, liked and passed this on to my friends.

[@taylorverner3800]

Fixed my dryer today thanks to your video! Thank you 😊

[@JimAdams367]

Well made video, my son and I just replaced our heating element by following along. Was a snap, dryer is working like new! Thanks for posting this - definitely a great video to reference if you are replacing your heating element in a Samsung dryer. Saved me lots of $ and didn't take long at all.

[@jeffostroff]

Glad it helped Jim!

[@edshields1664]

Thanks for the detailed help. Fixed my dryer, cleaned the vent and feel like a champ! You helped me from making the mistake of buying a new dryer!

[@jeffostroff]

Great job!

[@pratikzora]

Dear Jeff, Big thanks for this wonderful tutorial. I just finished replacing the heating element and my dryer works well now. I am from Calgary, Canada. Thank you.

[@jeffostroff]

Glad it helped that is awesome to hear Pratik

[@JC-xg2ic]

Thanks so much for this detailed video! Even though I was looking for an excuse to get rid of the Samsung appliances that came with the house, figured I could try to fix it first to at least finish my laundry. But omg, the lint dust! I vacuumed out the vent in the wall first with my shopvac and it clogged for a sec with the chunks that came out! Glad I watched this video and saved myself a fire. My parents never owned a house, so I had no idea that it was a thing to be aware of. The only thing I wished the video had addressed was how tricky the metal wire connecter tab things connected to the shell of the heating element could be. I figured it out eventually! Thanks again!

[@jamesdodge1733]

Thank you for this video. I purchased the entire unit instead of replacing just the heating element. I was able to take apart and replace it and put it back together with in two hours. Your video so SUPER helpful. Thank you.

[@jeffostroff]

Great job James!

[@redwoodguyTTV]

Awesome video 👏. I had done this fix once before but just used a little vacuum tool to clean the vent. I bought the kit this time and pulled 3 Plastic shopping bags full out of our vent exhaust. Also, your step by step was perfect. The stubby screwdriver was a must. Thanks for making it easier for me to get it done more quickly this time!

[@jeffostroff]

Nice work!

[@shipasailproductions5067]

Thank you so much for sharing this. I paid $17 and bought the heating element, followed your video to the letter and now my dryer is working better than before. You literally saved me hundreds of dollars.

[@jeffostroff]

Glad it helped! Cha ching!

[@darniusterix5774]

Your guide and link to the parts needed saved me hundreds on a new dryer! Thank you so very much!

[@jeffostroff]

Glad it helped!

[@makomeko7055]

Thanks for this video. I have the same exact dryer and was able to do the job in less than an hour thanks to you. Very helpful, not to mention how much money I saved by doing it my self

[@michaelcraven7451]

Thank you Jeff. You just saved me time and a great deal of money with this video. Nothing short of brilliant. A full explanation with every step and I managed to do this within a couple of hours. I think that was very good as we also bought a Flu cleaning kit and did that. Just like he said there was a bagful of lint blocking the flu pipe which confirms what he suggested and probably why the heating element burned out. Watch this video for complete and precise details, suggestion and a very good instructional lesson.

[@jeffostroff]

Awesome Michael I'm so glad to hear that worked out great for you

[@bobifrah]

Thanks to your video, I was able to complete our dryer repair successfully!

[@joshthomas2807]

At first I thought, why such a long video? But after watching, I get it! Fantastic video. Very thorough, but not inefficient in the least - explanations were precise, relevant, and well-timed, with the occasional touch of humor too! Thank you!

[@TheTashira247]

Thank you so much for this. My husband was ready to call a repair company for our 3 year old dryer. Found your video, ordered the parts, et violà! The only problem I ran into was re-installing the housing, darn screw holes wouldn't line up. 🤪

[@taeminusone]

This worked a charm! We did it ourselves following your simple and easy steps. Thanks for saving us a lot of money not having to buy a new dryer! $29, a little time and effort and it was done!

[@jeffostroff]

You're welcome!

[@samanthajacks-gunn4988]

I am so thankful for this step by step video. I AM SURE YOUVE saved us a ton of money.. I fixed the dryer all by myself.. Feeling so proud

[@jeffostroff]

Awesome and yes I have kept many many people from spending 3 or $400 on the repair person

[@Toutanette]

Thanks for this detailed video, I had the same exact problem with the heating element, and you're right : my dryer was clogged with lint, so it explains why it was not very efficient anymore and why my element overheated and burned. Dangerous situation indeed. Now I will open and clean my dryer each year 🙂

[@jeffostroff]

Thanks, I'm glad you liked it!

[@joshuajohns9368]

Just wanted to say huge thanks as well! Was able to get in and swap out the heating element. Great savings by being able to do it myself!

[@jeffostroff]

Great to hear Joshua

[@JoseTorres-mh8qm]

Thank you! My Samsung heating element broke in exactly the same place. You video helped me save a bunch!