Free CCNA | STP & FHRP Synchronization | Day 52 Lab | CCNA 200-301 Complete Course

[@ahmedabdallah6385]

I would like to thank you Mr Jeremy recently I passed my CCNA exam you're my primary recourse without you I couldn't pass this exam may god blessed you am Huge fan of you again I really appreciate your help and support

[@JeremysITLab]

Awesome, congrats Ahmed! Best of luck with your future career and networking studies.

[@ahmedabdallah6385]

@@JeremysITLab 😊😊😍😍thanks

[@jainamshah8108]

Hello jeremy.. Yesterday i gave my CCNA and successfully passed the exam.. thanks a lot for the free videos.. god bless you

[@JeremysITLab]

Awesome, congrats Jainam! So glad to hear that :)

[@modouceesay6574]

Much love from The The Gambia 🇬🇲🇬🇲...I can't thank you enough for everything u have been doing to help us. Your work is very much appreciated 🙏

[@michaelgerrish6364]

Yo dude, got my CCNA just with your materials and boson. Thank you greatly!

[@JeremysITLab]

Awesome, congrats Michael! Glad to hear the course helped you pass even in its incomplete state ;) Best of luck with your future career and studies!

[@Angelwt26]

Awesome lab, feels great when it's difficult but at the end you do it all by yourself

[@リンゴ酢-b8g]

another lab done. even though it's not required by the ccna, it was a lot of fun and i will do it again, experimenting around with the concepts learned so far

[@-b777ljq3]

good practice about the knowledge in earlier videos, many thanks for Jeremy's hard work.

[@TiTo_SPB]

Jeremy,, i wan to thank you for the great effort your doing,, i just passed my ccna exam 2 hrs ago,, you are a part of this success. Thank you)

[@habinh2520]

Have you referred to any other study material or did you passed Ccna just by this watching all this videos?

[@habinh2520]

I am also trying to crack ccna. How is you advise

[@TiTo_SPB]

​@@habinh2520 Jeremy course is amazing ,, but because it didnt finish yet i used different resourses for practing ,, david bombal , kevin wallace .. and a lot of search on the internet ,,,, its a long journy )

[@JeremysITLab]

Awesome, congrats Tarek! Glad my course helped :)

[@TiTo_SPB]

@@JeremysITLab your course is the basic foundation for my knowledge, thank you :)

[@majiddehbi9186]

Hello jeremy u re great and just to tell u that here in algeria u re very famous. Very crutial lab thx and GOd bless u

[@JeremysITLab]

Thanks Majid!

[@svenra1009]

Hey Jeremy thank you very much for you studdy materials (Labs, Videos, Boson....). Your flashcards helped me to pass my ccna 200-301 today :) 🙏 Greeetz from germany

[@JeremysITLab]

Awesome, congrats! So glad to hear that :)

[@TheFaisalfam]

Hi Jeremy, Thanks for making it easy for us, I recently passed my CCNA.

[@ng-itconnect]

thank you very much Jeremy's IT Lab with your well explained course and my personal research I passed my ccna cisco 200-301 exam with a very good score

[@JeremysITLab]

Awesome, congrats Zack! Glad my course helped :)

[@jackass3517]

Thank you Jeremy, the way you teach en explain is great!

[@safayethossain4485]

Another great Lab. Thanks a lot, dear Jeremy.

[@alexanderjunior9442]

You are great Jeremy. Thank you for all you do. We are greatful

[@konefine3626]

Thanks for changing people's life.

[@JeremysITLab]

Thanks for your long-time support :)

[@benjaminazu-crabbe3818]

Thank you Jeremy

[@Morawka1]

Why did this topic follow LAN architecture and when did we learn about FHRP Synchronization?

[@NetworkingwithHamza]

I had forgotten configuration for FHRP - Good time to go back and revise

[@azam-khan]

@Jeremy's IT Lab very good lesson

[@knaulzz]

need the will to not give up. KEEP GRINDING

[@balafua]

This lab has been the hardest so far, struggling to understand it. May be refreshing my brain with STP and HSRP would help

[@derangedkangaru9017]

out of curiosity what day did we go over all these standby commands. I have so much love for this course... its insane that 53 days in and this the first time i feel a little lost :P

[@John-kj4td]

Same lol. Just did the day 52 lab which is NAT architecture: 2 tier, 3 tier, spine leaf... definitely lost on this one with HSRP. Will follow along and hopefully some of it sticks in my brain. Anyway, thank you for this amazing course it has been wonderful!!

[@syundown6005]

Question-- Why is DSW1 configured to have preempt enabled on *both VLANs* if it's a standby router for VLAN 20? I could see it if for both VLANs DSW1 was supposed to be some sort of prioritized router (not taking into account that we want better load balancing as a point of this lab), but then in that specific case, why is DSW1 being configured as the standby router in the first place for VLAN20?

[@secchu8812]

Great course. Good content. Looks like the syllabus is almost complete. What next? JNCIA? CCNA Voice? If CCNA Voice packet tracer nor GNS3 won't be able to cover the labs. Probably the CCNA is the exam that requires the most real physical resources.

[@JeremysITLab]

The CCNA voice certification doesn’t exist anymore!

[@otonalencar5145]

in DSW1 the configurations for FRRP were made on Interface VLAN 2 instead of 20. 4:30.

[@JeremysITLab]

Nope! Notice the '0' under the two log messages. Those log messages appeared in the middle of me typing '20' so it looks like 'int vlan 2', but that '0' under is part of the command, so its 'int vlan 20'.

[@otonalencar5145]

@@JeremysITLab 🤦‍♂you are right! Thanks for replying!

[@Hartley94]

Thank you so much 🚀.

[@shubhammoral5502]

Is it necessary to enable preemption on standby routers like you did for vlan 10 on DSW2 and vlan 20 in DSW1 ? Does it do any good?

[@JeremysITLab]

Not necessary, I just like to make the configurations match.

[@braybraycooldude1238]

weren't HSRP configuration supposed to be done on an interface and not a vlan interface? I don't remember ever configuring it on a VLAN interface in the HSRP video lessons. I was stuck trying to enter the standby version 2 command on interface g1/0/1 .. for some reason the switch would not recognize the command in packet tracer but for some reason it'll accept the command if I enter interface vlan configuration

[@vulpritprooze]

I think it's because Jeremy set the lab up this way. Using VLAN in this case looks to me like it's a good idea to lessen the burden in creating the lab.

[@ganeshk5378]

Great series Jeremy..!! Thanks a ton...do we have any upcoming CCNP and CCIE series as well?

[@glenntembo2693]

Thanks J

[@Mpinecone]

I have no idea why this works, but if you keep getting the duplicate IP address error, change both versions of the standby to 1, then back to 2. I was troubleshooting for 30 min trying to figure out why they kept trying to become the master, but that was the fix i was able to find.

[@muzam7015]

same problem,probably error on packet tracer

[@very-boring-username]

This drove me nuts! I thought I was doing something wrong. I even went as far as to type int the commands side by side along with the video to make absolutely sure my configurations were identical, and I STILL had this problem. Once I get my CCNA, I'm never using packet tracer again. This program has bugs and lack of support for commands for nearly every single lab in the course, and it's insane Cisco puts out such a buggy product.

[@XxThePlaylistxX]

For me, this happened when I forgot to specify the HSRP standby group number in my commands. If you type "standby ip " instead of "standby ip ", that's when I got the flood of duplicate IP errors. Probably because if you don't specify the group number it doesn't know that the two switches are sharing the virtual IP.

[@vulpritprooze]

You're right. This solved the problem. Thanks! I think I know the reason why it fixed it. For some reason, if you look at the standby brief, you'll see both VLAN10 and VLAN20 HSRP is actually active. This is why it's a duplicate. We only need one active HSRP. Using standby version 1 then to version 2 again most likely resets the HSRP process and thus it's fixed again. The one reason I can think why this entire debacle happened is because we most likely configured the lesser priority vlans first. For example, we configured HSRP on vlan 20 first before vlan 10 in DSW1 and then vlan 20 HSRP became active. Even when we configure vlan 10 HSRP later, vlan 20 HSRP doesn't know this and would fight for the position of active. Idk if I'm right but that's my two cents. Hope I'm wrong though. There's no way it works like this. I started getting duplicate address errors when I configured HSRP in int vlan 10 first in DSW2. I configured vlan 20 after, and then it happened. This is because vlan 10 HSRP has lesser priority, yet it was the first HSRP that activated first. I don't know why vlan 20 HSRP didn't forcefully stop vlan 10. Or maybe this is a packet tracer bug

[@dhanajon5528]

i came across the same issues twice despite restarting the lab. not even sure how i fixed it but i think i disabled and re enabled preempt and it worked?

[@Martin_JY]

Thanks Jeremy!

[@panbelmonte8746]

Hi Jeremy, just wanted to ask why do you need to enable HSRP preempt on standby SVIs? I thought that preemption should only be applied to the active SVIs so that it can gain the "active" status back once the switch went up from a downtime. Thanks for clarification.

[@mohamedalpha3430]

God bless you

[@Pain-xm2cx]

Thank you

[@stephenapenkwah]

Thanks 👍

[@dhavalpatel3329]

Great man

[@kenetwork24]

Thank you jeremy

[@ez7ez726]

when itried to do it in my own its said vlan mismatch how to solve it

[@marouaneazza3519]

Does the FHRP protects the SVIs of each switch ? or it protects the default gateway only ? Thanks in advance

[@iBN-Faar33-n5n]

How to get it to work with Kali Linux?

[@django6556]

Hello everyone, i have this error on this TP : %IP-4-DUPADDR: Duplicate address 10.0.10.254 on Vlan10, sourced by 0000.0C07.AC0A I can't find the error someone can help me please?

[@vulpritprooze]

Switch standby versions to 1 and then after that to 2 of all vlans. It must be a packet tracer bug

[@bernymartinez1025]

First. Thanks. I see you from Perú. Where are you from Jeremy?

[@JeremysITLab]

From Canada, but living in Japan :)

[@sadsmile12]

i think the best answer for task 4 question 4 from boson 15:30 is to disable preempt function so even if a new switch joined the group and has lower priority is wont become the Active switch because the HSRP is non preempt in our case

[@nguyenhuutien1134]

Have you taught about BGP?

[@JeremysITLab]

Nope, this course is just for the CCNA.

[@nedatuaconta2431]

tysm

[@muneebkhan2944]

Is this ccna routing and switching ?

[@JeremysITLab]

The CCNA routing and switching doesn't exist anymore. Now there is just one CCNA.

[@mazenabboud3681]

Thanks a lot, I want to start to learn with your course, how many videos still to be uploaded ?

[@TheRomeNi99a]

Priority in relation to STP and HSRP had me so confused. Lower priority in STP gets elected and Higher priority in HSRP gets elected X_X

[@afridijalal2355]

Sir please make a dedicated video on VPN

[@JeremysITLab]

Maybe after I finish the CCNA course!

[@pieleanumihai928]

😁

[@sodden9732]

oof, bit hard, had to following along

[@llQuietyoull]

Wut.

[@ninosodicho382]

Thank you Jeremy, the way you teach en explain is great!

[@BurimKrasniqi-f8z]

thank you Jeremy