Arctic Cat 650H1 How to Remove Head DIY

[@andrewlacroixharding9922]

Usually never comment on videos but gonna write one this time I really appreciate you taking the time to show how to do this, and your other video about doing the timing I had to change a head gasket on this exact model of atv and it all went smoothly thanks to your videos super helpful man thanks. Atv runs perfect

[@reignswolf815]

FOR THOSE WHO WANT TO KNOW HOW HE TURNS THE CHAIN: There's a hex cap on the side of your motor. Take the hex cap off and it'll expose a nut. Turn the nut and it will turn the chain. The hex cap is just a small circular cap with the hex imprint on it.

[@paulmacdonald4588]

Hey quick question on removing head to do valves should you also replace bottom cylinder gasket ??

[@user-vo9vj2ek2c]

Where are you located, I got one of those that needs the same work it is the same brand too.

[@chownzi2461]

My arctic cat mud pro 700 2009 has the engine loose apparently they have rubber mounts that wear out but other people said you can replace them with solid ones but I can't find any does anyone know about this

[@grantstockland2499]

Ya know the two bolts you have to talk of in those two caps, well I didn't take those off and my head broke in those two spots. And the arctic cat is an 04 and he was gunna scrap it and we were just trying to get it going. Is there any way to either JB weld it or do I need to get a new one. Help

[@Jacksonransom]

do you have a video of removing the engine from the bike? im trying to figure out how to disconnect the drive shafts. rear has 4 bolts, cant figure out the front. cheers

[@TestDontguess]

+Jackson Ransom the front driveshaft is a slip yoke. It’s kind of a pain to remove without pulling the front diff

[@chownzi2461]

There will be a boot put a screw driver in the clamp and pop it open then pull the boot off and the drive shaft will come out

[@wadesmith9483]

Just unbolt the front diff mount bolts this will allow you to slide it forward a few inches to disconnect the front driveline. Easy peasy

[@kevinengland4675]

you ever try that seafoam for cleaning carbon out of an engine Jerry?

[@TestDontguess]

i have numerous times actually, works pretty good

[@kevinengland4675]

jerry bskorner good to know :-) thanks