2021 Kawasaki Teryx-4 "S" Camo Hester Edition. 30's, Audioformz top and more!

#Kawasaki #Teryx4S #HesterEdition
Thank you for watching, please hit that subscribe button and click the notification button to stay up to date. Let us know what you think! Be sure to like us on facebook!
www.hester-motorsports.com
hestersmotorsports

[@_Croom]

Awesome thanks 👍😎

[@HesterEdition]

Thank you for watching

[@duridersa]

Uummm can that 08-09 get some love to!??

[@llegacy1870]

Nice machine

[@HesterEdition]

Thank you, simple yet streight forward.

[@michaelnorsworthy4601]

Mmmm good info.. I'm thinking those tires are the way to go. Thanks for the info on this nice build.

[@HesterEdition]

You betcha

[@duridersa]

Should do a vid installing the uca & lca from new unit to 08-09 unit. Damn sure can swap the front end with the new stuff still.

[@andregiroux9839]

Hello and thanks for the video...a couple of questions...i just put 30-10-14 inch carnevores back and front on 5+2 rims...seen a couple of videos of guys doing this and like you put a 1inch spacer on the rear wheels..so i did also...and when you look down the machine front and rear wheels look lined up but the actual stance when measured is 2 inches wider at the back? And I've noticed some power loss especially on acceleration....I'm not a high speed driver but need the torque to climb hills and going through mudholes and it seems to do this just fine. I really don't want to get into a clutch kit...should i worry about premature clutch damage and belt wear? Thanks in advance!!

[@HesterEdition]

The Teryx will pull 30's decently, but if you want to gain it back and then some, clutch work will be best, more so from slow crawling. a stage 1 from EPI will make it feel like stock, sending off to either JBS or FTGU clutch builders will get you WAY over that!

[@draco9136]

If you had to choose a UTV for basic ranch work, trail riding, but also I need it to get over flooded rice fields for duck season. So heavy mud and water. Im love the mule..but leaning towards can am and polaris because idk how they fair in the mud

[@HesterEdition]

It's hard to beat the reliability and dependability of the mules, and we have built some sick ones! Can set up a mud beast or any way you dream really

[@draco9136]

Ok so I’ve narrowed it down to the cfmoto uforce 1000 or mule pro fx. Which would you recommend for the flooded rice fields and mud? I know you said I can set them up for the mud but I’m talking as far as engine and not getting stuck lol.

[@briangabriel4165]

Still going to be 3-6 weeks before mine shows up. Apparently they are having trouble getting shipping companies to move these around from the ports. In Canada anyway.

[@HesterEdition]

World wide I'm afraid. We are TOTALLY sold out of a 4 seat Teryx's for 2021 now, and it's April, won't see anymore till probably Sept. for 2022's. It's crazy

[@matthewshell8095]

Is there a lift kit out for the teryx 4s yet

[@HesterEdition]

No, add 3/4-1" preload in the front like we did on this unit, add 30" tires and you will sit at roughly 14" of ground clearance F&R.

[@jaysonlund4050]

What would you suggest for a fender flare for the Teryx4 LE S. With the wider stance they make a mess in the mud and snow.

[@HesterEdition]

We can get you set up with mud buster fender flares in 3 widths for all the coverage you want. Tuesday-Saurdays [phone]. Thank you

[@mustanggang3889]

How much for a red and black teryx 4s on 8” portals and 35 bkts? Nothing else and can y’all ship to Mississippi

[@HesterEdition]

Get with John Tuesday-Saturdays [phone] and we can help you out!

[@jessealdridge8573]

Will you guys come out with a Elka suspension package for the teryx S models and if so what kind of improvement are you expecting

[@HesterEdition]

Waaaaaaay ahead of you. Shocks done and we just got the first shipment in (limited numbers, and prices going up after these)! We once again totally humiliate the stock foxes in every way!! Travel increased, ride quality you dream of. To order call Tuesday-Saurdays [phone]

[@ThePrettypablo]

would you be able sell me this tire and wheel and spacer set up for my 2021 Kawasaki teryx4 s le And ship it to Wisconsin?

[@LetsGoBrandon_]

Toe/camber looks way off.. maybe it's just the camera angle?

[@HesterEdition]

These are factory a-arms, without the proper pre-load adjustments they camber is even more aggressive looking. But no, factory shocks and arms.

[@LetsGoBrandon_]

@@HesterEdition Thanks, I'm studying your builds so I know what to get when I do the long travel shocks for my T4LE.

[@chrissegar8087]

Can you post a link on the wheel and tire set with rear spacer? I want to price them out. Thanks

[@chrissegar8087]

Or can I order them from you direct?

[@HesterEdition]

@@chrissegar8087 Sorry for delays, KZbin does not show all replys to us, I happen to be going through lol. We don't have an online store, everyone calls in or messages us through our Facebook page facebook.com/hestersmotorsports and we can sure do our best to help most situations. Since these were truck tires we bought them from a local tire shop here in town, what most people do or hunt for deals on size and style on the internet, wheels we can help with in that situation.

[@waynepirkle1593]

Nice ride, i have the same model and looking to upgrade the shoes. Can you please confirm the part # of the ITP wheels being used on this Teryx? I believe you say 4+3 offset in the video but i can only find 5+2 listed for 4/137 -15" on ITP's website ... Thanks!

[@HesterEdition]

The part numbers I have are from suppliers, but when I look at a 15" 4x137 I only find 4+3's. Any other brand that makes a 4+3 will work as well, even in other wheel sizes, unless you wish to run truck tires like this one.

[@tceason4510]

What would this exact setup be OTD?

[@outthedoorlife]

I have a 2021 Teryx S two seater. Do you know of a rear windshield for this model? I'd like to put the front flip windshield on but I've read that it can get pretty dusty without the rear. Perhaps a complete accessary list as Kawasaki is very limited, their weakness imo. Appreciate any info and I enjoy your videos. Very informative.

[@HesterEdition]

If you have the flip open window dust is vastly cut down because of air flow. There is a mesh rear window yo allow air flow but stop eddie currents from pulling dust from the bed when the windshield is closed.

[@CTDpower07]

Could we get a view of an S model with the wheels turned to see the clearance between the tires and fender wells? I want to put 30's on mine, but not if they rub when turning/flexing... 4/3 backspacing (+10 offset) for the wheels is what I was thinking about using, same as you did here correct? Also, do you know off hand if there are any issues with a 1" spacer in the back as far as the OEM stud sticking too far through the spacer? Maybe you have to cut them shorter? Thanks! Aaron

[@HesterEdition]

Not all 30's are true to size, most are slight under sized, these measure true at 29 1/4" 0 rub. Some will measure more true or slightly over size, on the "S" with a TRUE 30" tire at full lock to the left and compressing the shocks like rock crawling, you can get some rub, but it's all steel plating and if it does it's not often. Take the ol hammer and bend that nub at the bottom on the drivers side bottom, that will also prevent tire damage.

[@JamesJohnson-gw1yi]

Hester what is the best tree kickers to put on a two seat 21 Tyrex s model just put 30 all the way round so a little bit at a time

[@HesterEdition]

Best all around and bang for buck is the Super ATV ones, let us know, we can get you a better price then direct from SATV :) You can see those nerf bars on a Teryx4 we built here. kzbin.info/www/bejne/Y3XGXoKNh9Kmba8

[@JamesJohnson-gw1yi]

Pastor this is James Johnson in Indiana do you have a pipe to fit my T-rex 2021 it's a two-seater 800 and then I heard you was going out of business is that true I need some tree kickers too

[@HesterEdition]

@@JamesJohnson-gw1yi if you believe rumors we've been going out of business for 40 years lol. You need a muffler for the Teryx? Or a performance exhaust? And yes we can get you the nerf bars.

[@Kadukuoffroad]

Nice unit 👍 I really like the teryx S ,but i was wondering if you get any 2 seater units in stock, and is possible to run 32's on 4+3 15R ?? That would be epic 😎. Or must have a super atv 6"l Iong travel kit 🤔 to run that size tire??

[@HesterEdition]

no way to fit 32's without portals at this time, but SATV is working on more "S" stuff and I'm sure HCR will as well, we do have out HesterEdition Elka shocks ready and pre-selling nore for more travel and EPIC performance upgrade. Set of shocks, 4" portals and 32's would be a EPIC crawler build!

[@Kadukuoffroad]

Yes sir, I would like that just without the portals. Some nice clutching and tuning. I've been following along with all the builds and very impressed so far.

[@Kadukuoffroad]

So no new updates on the Hester long travel kit yet?? Would be awesome to see 14"/16" of travel on the teryx S with a 72"/74" width and wheel base greater than 3", at least 2"front and 2"out back..

[@Kadukuoffroad]

Can't wait to see what the crew @ Hester's come up with.. cool stuff 😎 thank you

[@HesterEdition]

@@Kadukuoffroad It will take a little time for all the aftermarket to catch up, BUT yes you will see everything, JUST adding our shocks will put you almost 13" travel! and I'm sure long travels will come out, I know HCR won't come out with anything for at least a year, since they can not get King shocks till March of 22!! Good thing we will be making our HE Elkas for HCR's! As for SATV we are working with them on new Long travel kits! might be fall to winter before they come out, we are trying to get them set up with our HE Elkas too!

[@matthewshell8095]

I have the same teryx that's in this video and I seem to keep bottoming out on everything what exactly should I set the preload to is there a phone number that I can call to speak with someone that could help me

[@HesterEdition]

Bottom out on the chassis or bottom out the shocks?

[@mitchellfarmer9536]

Can you do a different offset in the rear to avoid using wheel spacers?

[@HesterEdition]

If you keep stock wheels you wont need to. You don't HAVE to have the spacer, but if you want it flush. Nice thing about the matched wheels is you can rotate them, you can't with staggered wheels.

[@mitchellfarmer9536]

What brand of spacers did you use and did they fit without any mods?

[@HesterEdition]

@@mitchellfarmer9536 Super ATV, we can get you a better then sight price on them, 0 modding, bolt up and go.

[@fernandorivera374]

I have a 2020 kawasaki teryx 4 can I put 30 inch tires and not hit

[@HesterEdition]

You need arched arms to clear 30s, either Super ATV or HighLifter. A lift OR our epic shocks for best clearance. Max tire size on stock arms with a lift OR our shocks is 28"

[@HesterEdition]

Check out our Teryx playlist OR Everything Elka playlist to see Teryx's with those set ups. Let us know if we can hook you up and save you money.

[@michaelrichardson9694]

Nice! Like you videos. I am looking around for a hunting rig with good clearance and suspension travel. Any suggestions?

[@HesterEdition]

Check out our Kawasaki Mule playlist, on the FXT 6 seat mules, go lots of hinting rigs, and also the CF-Moto playlist, the U-Force 1000 is awesome and the new 1000XL 6 seat coming. We make shocks for them all, awesome everything rigs as well as the Teryx's

[@washmedetailingandaccessor1286]

I may have missed it but what’s the tire size on the side wall. I am looking to order this exact set. Thank you

[@HesterEdition]

You have 2 options. 235/75/15 or 30x10.50x15. Both are 29.6-29.8" true but the 235s cost less then the 30.

[@Gustavo-nu1kq]

You mentioned these were mud tires?!?? And that they were lighter then other utv 30”??

[@HesterEdition]

These are light truck mud/snow tires, not a utv tire if that clears that up 👍.

[@laddeleon22]

Can I run 4” portals on the SLE models?

[@HesterEdition]

Yes. 4, 6 and 8"

[@laddeleon22]

@@HesterEdition what mods do I need to run a 4” portal?

[@HesterEdition]

@@laddeleon22 portal kit, pick gear reduction and case material. Install.

[@laddeleon22]

@@HesterEdition thank you 🙏🏾

[@HesterEdition]

@@laddeleon22 we can save you money on those too, let us know!

[@markfrasier4213]

I just got my camo s model. Thinking of putting 30 inch tires on it. Does it affect the low end power very much? Would I need a clutch kit, the trails I ride aren't very rough.

[@HesterEdition]

Stock clutch can pull 30's pretty good, if you want MORE torque, harder acceleration a clutch kit can help, you have 4 main options for the teryx based on the performance level, elevation and riding style and performance demands.

[@DZNTS671]

what size are those rims? nice set up

[@HesterEdition]

Rims? 15"

[@DZNTS671]

@@HesterEdition 15x7 or 10?

[@HesterEdition]

@@DZNTS671 15x7