Jet Ski Part II 1994 Jet Ski - Will it run?

[@JohnBullOutdoors]

If you missed Part I, you can check it out here -- kzbin.info/www/bejne/qGWzqmmghK2ChKM

[@wiktorborowski11]

I know Ur gona be sucesfull on youtube i.m going to mąkę an screen of this comment and over 5 years when Ur gonna have 3mil subs i want an Free jetski for my suport over 5years

[@wiktorborowski11]

I must give u 2 tips when Ur recording tel ur wife to not to mąkę the wash and upload morę if you can that gives you morę subs and put some relaxing but not sleepy music in the backround

[@jetskirehab750]

As others said, engine on first, then water. Water off, then engine off. Glad you're bringing it back to life!

[@JohnBullOutdoors]

Thanks for the tip.

[@evgehaplay4912]

Hey man! Good job! Thanks for the content from Kharkiv, Ukraine ❤

[@albertopostt]

Its is nice what you have done for this old jet ski, keep him alive! Nice job.

[@basimunoz930]

I always double zip tie the oil lines, great video!

[@JohnBullOutdoors]

Double zip tie. I didn't think about that. Great tip! 👍

[@bryanglover3217]

That trim moter assembly is a Chevy Malibu mid 80s -90 windshield wiper motor look up wipermoters . That S, Steel box at the back is a water box muffler when you're done ridding at end of the day take out of water start up reve up couple times get water out .cut off fuel an run it out same time so carbs don't couroud. Pull out bull plug ledge out tell next time. When u put in water next time ledge tied to trailer in water fire it up work up rev up about half throttle to put under load about 30 sec to one an half min till she runs clean you'll have no problems good job keep extra set of spark plugs in compartment change every season skii on😎

[@josephriestra7904]

Hey!! That was a pretty good fire fighting knot your videos are great love to watch them!

[@jetski_buddies]

Cooles Video 👍🏼 I love old Jetski

[@jetskirehab750]

Stock bilge only works in water, It uses suction from the jet pump.

[@benjiej1380]

Nice work

[@derekperkins8158]

getting it fixed up little by little...the same thing i would do..lol

[@wiktorborowski11]

Bro good work keep IT up

[@billd1795]

I have a 97 kawasaki and it is a siphon style bilge pump. So you have to be in the water. There is a hose run to the pump and it uses vacuum made by the pump to suck out the bilge water.

[@JohnBullOutdoors]

Really good to know! I was hoping that was the issue.

[@ptsdgopedsnbikes8156]

i dont know if this jetski is different from the ones ive owned but you should turn your water off before you turn the jetski off then if your going to start it you just start it up and then turn the water on or it can flood the engine with water and hydro lock

[@JohnBullOutdoors]

Great to know. Thanks for the feedback!

[@jankemmerer6669]

the bilge pump is only working when you are driving in the water. the jet stream of the pump is creating a vacuum and sucking the water out

[@realworld8990]

I dont like the twin keihin carburetor, no many torque vs mikuni. Swapp, this carburetor for à single 44 Super BN Mikuni and see amazing torque I'm remenber the big change when we swapp for Mikuni 44 vs keihin on old 650SX or X2

[@jimjulie1]

It doesn’t have a pump, water is evacuated from the hull by siphoning action created when the ski is in motion.

[@marianomalespinasencio9441]

Hola amigo tengo uno kawasaki 900 me falta la turbina

[@johnhicks735]

It would A can save you some money to. Window motor.,or A windshield wiper motor will work in it's place just the same for that part. Try find one that matches yours. By taking it along with you for A comparison part reference. Mitsubishi.& Other foreign type of imported vehicles have those kinds of electric motors on them to.

[@peterheunz9391]

I would remove the oil pump and pre mix the gas with 1:50. if the oil pump fails you can have engine failure. Greetings from Germany

[@johnhicks735]

Why don't you just go to A junkyard to get that electric motor for the up.&down control part of the trim.& Tilt for the impeller head unit.

[@bryanglover3217]

When u store it take out bull plug cut off fuel run it out in carbs they won't gum up from sitting.put tung of trailer up at a good rake pull plugin hull keeps water from standng in hull and rotting wireing hosees electrical stuff dis connect battery in winter ,mist moter compartment and aluminum pieces with we -40 cuts down on electrolysis an coroushion from forming on older machines great gob

[@heli-man-]

Sorry I can’t take you seriously with that mustache it’s hilarious did you do it for a dare 😂

[@johnhicks735]

I recommend taking battery.& Tester A long with you such as light tester.& Multimeter tester for those purposes.& A good 12-volt battery to like A deep cycle marine battery.