Jetworks F/A-22 Raptor build

Grateful thanks to Barry Fleming for his hard work into creating this video to help you build the F/A-22 Raptor.
This and over 40 other Jetworks designs can be found at www.jetworks.online

[@fcolon1976]

Awesome video thank you! 😊

[@patdiviney7630]

Another entertaining and informative video. Thanks for focusing on the mirrored parts, your explanation was crystal clear.

[@Shad3yB]

lol hope it helped Pat, there certainly needs to be more entertainment as it is a hobby and things do go wrong :) more so when trying to land or avoid trees

[@Hezza50]

For beveled cuts, I actually sand them. It started with making 45 degree bevels for control surfaces. With a metal ruler standing on it’s edge, tape the part, on edge to be beveled, to the ruler. Mark a line, parallel to edge of part, the required distance needed for bevel. Now you can sand back to the line, using the line on top and edge of ruler on bottom, to control angle of the bevel. For control surfaces, you measure back the thickness of the foam for a 45 degree angle. Or you just measure back the distance indicated on plans.

[@samaeltm]

Good vid. Very helpful

[@TegoSuwarto]

good job

[@rcdc9917]

Really enjoying your builds of these planes👍🏻very impressed . Can I ask which 3D printer you use? And also are you going to do a Vulcan build. Regards Dan

[@Shad3yB]

Hi Dan thank you, i use an ednder3 printer :) the Vulcan build is coming soon

[@rcdc9917]

@@Shad3yB thanks pal, looking forward to the build, then I’m making one myself👍🏻

[@Sandokans]

What battery size is needed?!

[@leonlevy9106]

Hi.i am a newbe to your site and projects.is there an option to buy the whole sheets cut by cnc?or just the plan and some stuff 3d printing?

[@jetworks]

No sorry I run Jetworks as a hobby I’m not in a place to offer that service

[@leonlevy9106]

@@jetworks thank you

[@JRIVERA1124]

Where can I get the plans for F/A-22

[@jetworks]

Www.Jetworks.online

[@tomaszkulas502]

can I buy the stl file for the 64mm EDF BULKHEAD from you. I don't want it for free, I know it takes time to design things like that.

[@carlosnevares940]

So you dont have any plans that we can download your planes to

[@jetworks]

www.jetworks.online - there are 40+ designs to download

[@tomaszkulas502]

Where can I get a stl. file to 3d print the exhaust tube for 64 mm edf?

[@jetworks]

Have a look on the Jetworks website :- jetworks.online/product/f-22-edf-thrust-tube-64mm-stl/

[@tomaszkulas502]

@@jetworks Thank you

[@ryansloderbeck421]

where can i get the plans for this

[@jetworks]

Www.Jetworks.online