Worlds Best Turbo Flutter! We Broke The Turbo.. Testing Your Dose Pipe Suggestions on the VL Turbo!

[@danielsullivan9207]

where's the milo tin?

[@Mr.Wongburger]

If there's one thing this suby guy knows, it's how to get that rumble. Need to section off the horns in the middle 4in connection, then make one side longer and have them come back together into 1 connector at the end.

[@SHOCKcustoms]

The sound wave reverb oscillates along the pipe at a ratio directly proportional to the diameter and length. SCIENCE!

[@TelmenBudsuren]

i dont understand ur comment but yeah, science

[@gmula1987]

& material.

[@troubledpigeon4493]

honestly if you made 100 of these videos i would watch every single one

[@s_1.o929]

25:30 is the best sound in the world ❤❤❤❤❤❤❤

[@alastairbrownlie7358]

7:29 when the build up to dose just hits different

[@tutyfruty200]

22:03 killed me 🤣

[@Gooie69]

Ever thought about trying a Fleshlight? I'm sure you fella's would have a few well used units kicking around.

[@MultiNinja888]

That prank will never get old 😂😂👌🏻 poor TJ. Another great bit of science

[@captainjamiegaming2539]

Praangles and pvc pipes were my favorites. You should try do 3.5 inch pvc pipe see if you can get even more perfected, and some of that flexy plastic intake pipe aswell

[@astletruscott6291]

Cheap alternative for the poor VL owners out there 😂

[@Thatcressidaguy]

They should try a 225 6m length of pipe, that would be legendary

[@garren3498]

they should do a fart can lmao

[@mr34]

You need to increase the volume of the intercooler piping after the turbo to slow down the pulse frequency. For shits and giggles, make a really long pipe or add a tank.

[@ivanleal4432]

Part 2 was as good as the first. I could watch dose science all day! How about a two-stroke bike expansion chamber? Or a pair of didgeridoos, one on each end of the moose knuckle antler horns? (since a single didgeridoo was too restrictive) Also a 3" cannon muffler, or a resonator? Or the most extreme, a tea kettle? Maybe it would need to be cut a bit to not choke the engine.

[@nathanwright8477]

Corey just that one guy always workin while the boys are muckin around. Keep up the good work cooooooreyyyy

[@Mo_tism]

Get another VL turbo and do a 2 into one double dose pipe. Both VLs into a 3.5” stainless pipe would be insane if you could get them to dose together

[@danielbrealey2924]

😬😂 That sounds like a firing squad for a turbo or two

[@patrikvnencak2923]

That double exit was best so far !! Great video guys as always !

[@wheeman999]

dosed my xr for 8 solid years 250,000km on stock turbo and it was still fine when I sold it. Dosing does not damage the turbo and or seals as other suggested. At least in my experience.

[@WaxedMerkin]

what about a expansion chamber, kinda like a hotdog muffler that has no baffling in it

[@nigolus8752]

23:22 sounded like fh5

[@damarlo1]

2 things i would like to see is a resonator, and a killer glass tube. Normally used as a see-through radiator hose.

[@josh5425]

Whale dong intake pipe there made for a Honda , they tapered from 3inch to 5inch in the middle and back to 4inch at filter end

[@JOSHJJ807]

pringles tube was sick but whats glass like? i reckon get a glass spaghetti container, glass cutter and knock the bottom off. tin tube would be siick too

[@wimsnuif1232]

Use a 3" stainless tube welded into a spiral or like a spring

[@4geedupandstuff132]

I think if you put a small bit of steel at the clamp end of the pringles can it would be tremendous

[@Vok250]

Love the zero fucks given down to earth production style of this channel. This is what we should show the aliens when they ask about human culture.

[@ifluro]

Keen to see the difference in a large volume between turbo and throttle body and small volume. Eg: long cooler piping with front mount vs short pipe-turbo to throttle body-no intercooler.

[@unheimliche9410]

use a muffler or resonator for the intake next time

[@luke_james]

Need to do a anti surge housing vs t51r mod housing

[@darkshredz2732]

Could do like the jassie but have then end sealed of the 4 inch tube with a 4 inch round plate and drill lots of little holes in the plate and call it the Cassie

[@Smisky]

oooooffft! lovely dose! 🤙🤙 (Get the assetto corsa modding turbo people on this asap!)

[@OFFNSV14]

Blow compressed air into the exhaust turbine on the double turbo set up see if it spools backwards or get one with a reverse rotation wheel in a normal rotation housing so its spinning the correct direction for the flow direction

[@matheusvieira7601]

Thx for this video my friend, I will make the same in my car using a 3" PVC. Hugs from Brazil!

[@KAP_MTB_Advetures]

Should try 1inch stainless steel dose pipe then drill 5mil holes in the first inch of length on the pipe?

[@jarrodd9392]

do a spiral type see if goes alright or turbo size to twin 2 in

[@PHONKYBOY87]

What do you think about making the turbo intake tube make 7 turns of 360 degrees, that is, a spring-shaped Pipe?

[@aroonali3399]

Can u do a tolite paper roll please

[@carsandkarts5021]

How about a traffic cone?

[@trigtrigger9794]

You guys blow at this .. Awesome work 👍

[@Z28Blake]

What about a dose pipe that's about 36" long made up of alternating 3" & 4" diameter pieces that are each 6" long?

[@e34boat88]

what if you weld the 30cm 3 or 4 inch pipe on the turbo so it would be solid

[@TheSaltySailfish]

What about a bunch of .25 or 0.5 inch welded into a 4inch maybe 8 or so baby pipes into a 3 inch

[@kevlong76]

This is sick boys

[@STEVEH-sp9fo]

Try just the sillicunt connectors that you used to hold the pringles tube .

[@bigsnibes8604]

sick vid as always could try to stick an air compressor down the didgeridose pipe, combat some of the restriction and help her spool up could let you boys try more silly stuff :p

[@criticaldawg]

The pvc pipe sounded kaaaang.. Idea for nek time a actual trumpet! And get jessie boi to play different keys to see if it changes the dose… ooooft

[@willie9899]

What about a 2 stroke expansion chamber?

[@EliteHydronics.]

I have a fool prove setup of the audi quattro S1 chirping. Sounds incredible

[@JakeDogg-RIP]

Need a small straight thru muffler on it

[@fahadalnaemi2789]

what is the company name for the turbo and what size

[@andrewmagro7703]

the bazosoka was the best sound and you could even run it through the grill

[@ignacioaguirre4623]

How do they achieve that sound? Any modifications

[@jayadamson9750]

Do like a 3inch 300mm pipe with a traffic cone on the end of it

[@garathunnuvahkin7819]

Straight intercooler as a dose pipe?

[@dunxy]

Expansion chamber! So inlet dia--inlet (or smaller)dia again, dooo it for the dose!

[@AmirPomen]

Jasse is the most accurate replica of subaru impreza wrc pigeon chirping noise... From the 34mm fia spec turbo inlet restrictor

[@darcygreen3963]

Can u do a loop next

[@astletruscott6291]

Loop da loop dose pipe?

[@argi1495]

You should try the turbo on turbo action again by having a bit of hose on the other end of the compressor housing end going into the inter cooler straight into the turbo that way it spins the right way around and hopefully you will get a blooooooody mean dosey boi

[@YourbroDan]

What about a thin intake flatten one end of a 4 inch

[@Drunken_Hamster]

Moos knuckle big disappoint. But now I want to see some 2" and 2.5" versions of the Jasse pipe since the 1" version and 1.5" digeridoo were too restrictive.

[@trentblack9807]

Love the vids boys what back space u have on vl drag rims and what size and do u run a 235 thanks

[@Gabriel83580]

What about a 3" glass tube.

[@kingjimmy4770]

Lmfao It's that sammit's picture on the wall 🤣🤣🤣

[@LinoDoue]

T51r mod dose pipes next? Think pulsar sells one cheep to lol would be cool to see a stress test to

[@RodrigoNascimentoMattos]

for the turbo to work you need to invert the flow, so it feeds air in the right way!

[@ZupGarageJPN]

dose pipe suggestion, whole car exhaust and lets see if the mufflers, resonators and cats will muffle the sound!

[@K0NAK1D]

The only way to draw a 2, JASSY is with us in the big boiz league

[@lukajanelidze1176]

Last dose sounded like FH5 2jz highest turbo upgrade

[@connoranderson4534]

Traffic cone boys

[@FigQc]

idk why but when the other mechanic only watched 4 seconds, when you said "you, go back to work" i was like bruh

[@codacc173]

Best channel ever on KZbin haha bought one if ya drag vl tees waiting for that Thang to arrive

[@mercedes320e]

You should try a foot long 3" box section 👀 get all square up in here 😂

[@suprablackdream]

Best of the best video about flutter 😂😂😂😂😂 top !!

[@michaelgreen2642]

Gotta try a supercheap cannon muffler

[@nachoietaco6289]

Do one of those tubes that would make a weird whirring sound when you spun it around in the air

[@KareemFloat]

there's a channel called "hardware unboxed", where he does a "fan showdown" where he 3d prints/benchmarks/scores PC fan blades that the community made and sent in. this could be your version of it. as for suggestions for future dose tests, with added ascii diagrams: 1) the ball and shaft. buy 2 cheap metal bowls and hole saw a spot for the pipe and exhaust, throw a bead of weld/rtv around it to make a ball. with this you can make a lollypop shape (---o) or a skewered (---o-) shape. test both to see the difference and ball at the tip or near turbo inlet. 2) The 2 stroke chump. using a 2 stroke bike expansion chamber --- 3) Tentacle monster. fill a normal pipe with several bendy metal conduit. lets say 8 conduits fills a 3 inch pipe, then the empty spaces between the conduit you fill with Rtv. you own little cthulhu intake. make the conduits equal length, but later try to change their lengths. like borla tunes their exhaust. 4) the stinker. Take the usual pipe, then at the tip, add rubber hose/innertube slice. think of it like a whoopie cushion. farting car? 5) drunk dosage. take a Heineken mini keg, hole saw it out and lets see how that baby sounds. 6. inception make the pipe look like a VL. think pikachu bozo pipe but the air enters the top left point of V, the air then travels though the top of the L and down the lil leg. ----VL__

[@klyddmeisters]

you forgot the roadcone. that would be amazing maybe

[@jasonwilson9309]

Should try something in the shape of a traffic cone in different materials

[@trustfire]

4 inch cone down to a 2.5 inch outlet. 30mm long. 100% Spice I reckon.

[@haydenkobner5734]

These have to be the funniest guys on youtube!

[@tommurray8312]

keg dose pipe ?

[@AD-mcfurious3663]

I think this is the best one 20:08 And These sound like forza 23:24 25:41 And this is all of them 26:39

[@timothyoconnell3459]

4inch to 2 inch back to 4 inch?

[@stanley6440]

god i love these vids best sounds ever

[@neilwalker8686]

Something like a 2stroke exhaust

[@arthurdaher6087]

21:10 Reminded me of a Volkswagen

[@RustingSoftly]

4 to 1 exhaust collector. Quad dose pipe.

[@PetrolSniffa]

Ay, you boys should try the didgeridoo on the exhaust. That could be sick.

[@timbuzick8778]

whats a restraction

[@potentpudz9311]

Part 2 super trap off a motobike or a fmf pipe 😂😂 or how about a pipe with a end cap and 50 kazoo's 👌👌

[@clonehunterz]

yall know these old vinyl player horns? Gramophone? we need that! :D

[@naxoslfdl7440]

Need the rubber chicken dose with a 2” pipe up the clacker

[@Eb34zlr]

Part 2 bby😆 it’s in the science ☑️

[@liamcoll1411]

4 inch into twin 3 inch but make one 300mm straight and one with a 90

[@kohanson]

lol this is an interesting experiment and I am subscribed to your channel!

[@Turtzi375]

u should try a turbo exhaust manifold next

[@MultiNinja888]

How good was the PVC 👌🏻👌🏻 KANG dose for a few bucks

[@corpsenugget455]

Try a catalytic converter, a 4 inch to a 2 inch back to a 4 inch and a bagpipe reed

[@vass._ek]

pvc and s bend is best for me

[@rattyratstuff7125]

with the digeri dose pipe was anyone else expecting "its time to... du-du-du-dududududu dOSEEEE"

[@boedinnovotny4118]

Idea: instead of having the compressor inlet attached to the pipe have the outlet attached, then it would be spinning the right way

[@abandit1312]

Should try a 90 3inch with a hotdog muffler