JIC Fittings / Thread - Identification & Installation - Heads Up for Hosers

[@deankay4434]

Thank you Canada for giving many the nick name of “Hoser”. I thank you kindly my friend. ASE Master Tech, 78. Retired.

[@jorgebarcasnegras6262]

Thank you for taking your time to improve our life.

[@robertdeptula2003]

1:50 So, if I connect JIC 37 male with SAE 45 female. Is it going to hold?

[@GreggDistributorsLP]

As long as the fittings are not a -6 or -12 size, they should still create a seal on the metal to metal surface and hold together.

[@robertdeptula2003]

@@GreggDistributorsLP Thank you

[@job38four10]

Great info video, thanks for posting........

[@dmanliberty3136]

Very helpful! Thankyou!

[@gerardl2395]

Another great video.

[@GreggDistributorsLP]

Thanks again!

[@39_a_be_aldrinmarian48]

explanation is too good sir can i get catalogue guidance?

[@GF-wb7xt]

Thank for the explanation. It was very good.

[@GreggDistributorsLP]

Thank you! We're glad you enjoyed it.

[@vinodkumarvinodkumar2516]

thanks sir very helpful

[@MS-be9wv]

Is there a working pressure for those fitting? And at which value they could withstand?

[@GreggDistributorsLP]

The question of working pressure is a tough one to answer as there are several variables that have an impact on the ultimate pressure rating for the adapter. Pressure ratings can vary based on the material, the quality of the adapter and ultimately whether or not the adapter is being utilized in a dynamic or static pressure application. Lastly, pressure rating varies based on the size of the JIC fitting. For instance, the Aeroquip -4 JIC has a pressure rating of 7,000psi whereas the -32 JIC has a pressure rating of 1,750psi.

[@mdfahad6584]

Thanks 👍

[@jean-francoisfortier8727]

Where can I find your guide and tool to identify fitting? Thank you and btw great video 👍

[@GreggDistributorsLP]

Thanks for watching, we're glad you enjoyed it! You can find the thread identification kit at: greggdistributors.ca/hose-and-fittings/Industrial-Fittings/Industrial-Fittings-Tooling/aerft1341

[@daryncook]

thank you for the helpful information!

[@GreggDistributorsLP]

We're glad you enjoyed! Thanks!

[@kennethkuhlman8864]

If i have a #10 45degree male and a #10 37 female, will this seal properly?

[@GreggDistributorsLP]

Those will not seal properly, unless you were to use a few adapters to make it work. We would recommend watching our other videos in the Thread Identification series, as this will help you understand it more.

[@CBM-k8d]

Hello sr., Which is the Thread angle of JIC fittings?

[@GreggDistributorsLP]

As shown in the video JIC has a 37 Degree thread.

[@CBM-k8d]

​@@GreggDistributorsLP Thank you Sr., I noted that 37°C is the flare or seat angle, but I found that JIC thread does match with UNF specs, for example: for Dash N4 (1/4") thread spec is 7/16"-20, TPI and outer diameter (male thread =0.44") are the same mentioned in UNF specs for 7/16" thread, it is correct? if yes, thread angle is 60° (I'm sorry for my English, is not my native languaje)

[@MS-be9wv]

If I connect JIC fitting to spherical O ring seal, they will leak or not? Because it happens in low pressure system , and found no leak

[@GreggDistributorsLP]

For a JIC fitting the sealing action occurs on the 37 degree seat of the adapters and not on the threads. The use of an O-ring of any kind should not be necessary. If you are worried about leaks on a JIC fitting, you are better off to utilize a specialized sealant such as Loctite 5452, if you want to learn more about this product, it can be seen here: greggdistributors.ca/adhesives-sealants-and-tape/Thread-and-Gasket-Sealants/Pipe-Sealant/lct1265770

[@haydengeorge4345]

where do you get those tools?

[@GreggDistributorsLP]

They are available at greggdistributors.ca/hose-and-fittings/Industrial-Fittings/Industrial-Fittings-Tooling/aerft1341

[@captainraven8004]

Ffft or ffwr does not guarantee a leak proof seal. Engineers with clean hands have little actual knowledge.

[@jerrycudd613]

Stop with the back ground music!!!!!!!!!!11