Adorable Halloween Ghost Badge

[@madhukeshnp]

You have got some seriously good bending skills and soldering skill

[@JiriPraus]

Thanks!

[@manukalias]

Ghostly Cute Project 🤪 Made my day, Would love to try this.

[@VagabondTE]

You are brilliant in your simplicity

[@Axeltreman]

This is so darn original, thanks for sharing!

[@MarieLynnRichard]

I am obsessed with this! Must make other shapes!

[@alico797]

This is so satisfying to watch ... Standing applause!

[@kylehickmen1684]

How did you make the LEDs flash on one badge

[@jonasmp6663]

These LEDs have special micro chips inside them. Just power them and they flash, no external control required.

[@ynnus_]

Where do we acquire such LEDs?

[@jlishere-dq2xn]

Yes indeed where do we acquire this kind of powerful light source, I can smell the power in them... the perfect balance of light and darkness has finally been made.

[@kylehickmen1684]

Uhh... okay?

[@hansdietrich83]

@@jlishere-dq2xn bruh use google

[@scarletblaze]

So I guess you can't use your wire bending machine. Even just for the outline of the ghost?

[@JoyceAiman]

Clean work 👍

[@AlexYeryomin]

Brilliant.

[@FriendlyWire]

These are absolutely adorable! Thanks for sharing!

[@BalynOmavel]

Blinking wtf? But you have no controller. How? :>

[@Sheevlord]

Those are blinking LEDs. They already have a blinking circuit built inside of them, so they don't require any external components to blink. Only power. There are even RGB LEDs that slowly change color on their own when powered up.

[@prateeksrivastava8470]

@@Sheevlord can you please share the part no and data sheet for the same blinking led?

[@Sheevlord]

@@prateeksrivastava8470 There are lots of those. I don't know which ones are used in this project. You can go to ebay and search for "flashing LED SMD" and you'll find a lot of different kinds.

[@prateeksrivastava8470]

@@Sheevlord okay thanks 😃

[@dr.s.b.3461]

Those are 1206 SMD LEDs with built-in controller. www.amazon.de/s?k=1206+SMD+wei%C3%9F+rot&ref=is_s

[@Kitearmy]

Super Fun - thanks for posting!

[@LuckySeer2]

What soldering iron do you use?

[@saintskinny8128]

You're an inspiration! I'm considering coming up with one of these myself, I just don't know what it'll be yet, maybe a penguin if I can figure it out lol

[@lukas--8538]

Jak dlouho to dokáže svítit a blikat?

[@valkorsimpson4525]

Can i get a link or description of that wire used?

[@nyetloki]

0.8 cm brass wire i believe from his other video description

[@fltcdtkaranchauhan6750]

awesome.......can you upload a guide for "Buckminsterfullerene C60, C70" with led and brass wire

[@rekhachoudhary6677]

What is the material of the rods you are using??

[@lars-sorensen]

LOVE IT

[@traitorxander]

I need to make one! Why does the one flash?

[@JiriPraus]

These are special LEDs that contains integrated circuit inside. They can do various effects depending on type - changing color, blinking, fading, ...

[@PaerlBlack]

@@JiriPraus Can you pleas tel us some more ! How are they called?

[@almaefogo]

@@PaerlBlack You can search on google and you will get for example a site from australia selling them, search with these keywords "Flashing surface mount LEDs"

[@PaerlBlack]

@@almaefogo And they are all 0805 ! Where he get 1206 no clu))

[@bh-db2rp]

@@PaerlBlack what is the difference between 0805 and 1206?

[@galihnurcahya1772]

Genius

[@annibot5124]

I came here after watching your project on INSTRUCTABLES.

[@arnavshinde9338]

Which program do you use to make stencils?

[@latheme1]

That uninsulated copper wire?

[@davidbeaine]

Thank you so much for sharing. What's the yellow thing at 5:29?

[@TheNormalUniverse]

So cute! Do you have any recommendations on where to buy the brass rod?

[@VDC48]

Very Nice 👍👍👍👍

[@rekhachoudhary6677]

What is the name of the led u use

[@WolFFenstein3]

Cool idea, but led leads very fragile, need to be very careful) Sorry for my english)

[@wilmanenamorado657]

Hola que bonito ,quería preguntarle,¿que tipo de material es el alambre que uso?

[@davidlacey6417]

Nice ideas,How could you power them using a 9v battery with a switch,Thanks

[@wallaguest1]

so cool

[@SuperBoobaloo]

Do you have any idea what the run-time would be like with a typical 2025 or 2032 cell?

[@babyloveyou1314bb]

yellow led (1.8-2.2v)to 3v battery ??it's work??

[@AshokKumar-pj9ms]

Awesome brooooooo

[@vijaymortha2350]

Arts + science 👍

[@leoneltello4916]

ask how do I make a lot of electronics blink I don't know

[@almostanengineer]

Made a wire bending machine, bends ghosts by hand 😆

[@markushykus]

Dobře ty !!!

[@xiuxian_feiyuli]

Where can I buy the material?

[@90daner]

Any wire is good for this?

[@eyonohesido]

How did you do the led blinking?? I love it!

[@Sheevlord]

Those are blinking LEDs - they have the blink circuit built into them, so they start blinking when you apply power

[@zeldaboch]

@@Sheevlord have they a neme? normal are 1206, and blinking one? thanks

[@harveycastiblanco1928]

Hello Jiri Praus, I hope everything is going very well, I have followed you for a while and I really like the projects you do, the truth is that they all seem great. In the ghost project you use flashing LEDs and I would like to do it, in your intructables blog you say that flashing smd LEDs can be used, but I have not been able to find them, do you know where I could buy them or what reference they are? Thank you and stay tuned . Have a happy day and continue to be successful in everything. Take care. I send you a big greeting from Colombia =)

[@youris4095]

Nice

[@davidferguson8478]

You should use copper wire because it's more conductive than brass wire

[@nyetloki]

The current requirements of this are so low that the wire resistance isn't an issue.

[@shahabhatefi5719]

Hi could you tell me what software you use for design this?

[@TheSyahrils43]

How to blink?

[@iceberg789]

what is that stiff wire, where do i get it ?

[@integrationofmanandmachine4714]

Stiffy limpy

[@aing.j.m]

Great video! It really explains how to do it, I tried with previous Instructable, but it was a bit hard for me and result was not great, with this video everything is much clearer. Also, please, could you indicate link to the button cell box? I really liked it.

[@edwinrodolfocampossolis8832]

Hermoso Trabajo ❤💖❤💕💖❤❤❤

[@farelo7428]

Are surface mount LEDs?

[@robmodzelewski9935]

yes

[@zephirius]

awesome !!!!

[@ankitkalekar7906]

The blue blinking one reminds me of someone (Megalonavia)!!

[@NTNLabs]

Tie diody su predkodene aby blikali?

[@profitablecopy]

You are both a fine artist and fine teacher! Thanks!

[@3X0easy]

How to chase?

[@subseeker]

Why would the hands be blinking, I don't get it

[@JBNoles]

What kind of wire are you using to make the form? Also where do you get your LEDs? I just found your videos and love them but have no experience with this sort of thing. I’d love to give it a try if you could point me in the right direction of supplies.

[@johnacsyen]

Brian Graham it’s brass wire soldered to form circuit.

[@Enigma758]

Interesting, as I've always learned that you shouldn't "paint" with solder, instead heat the work piece then apply it. But here "painting with solder" seems to be the best way to do it.

[@MrConminer]

Awesome! Gonna make a cat shaped one. Just subbed ;)

[@thecraftyphoenix1645]

That's so cute. Hope your proud of this. Love him!

[@GoingtoHecq]

I really want to make my own things but with rechargeable batteries. Tiny ones.

[@PCBWay]

You are amazing!

[@Дмитрий-ю8е2х]

Они мигающие есть в этом размере??

[@moth9659]

Instructions weren’t clear. Ended up summoning a real glowing ghost

[@AyanPahwa]

Hi please share the stencil to print :)

[@JiriPraus]

www.instructables.com/id/Halloween-Badges/

[@rahulghosh4289]

Smd led used?

[@shameemsha8361]

Minnel engane set aaki

[@ST0L24]

Pliers & wires, such unfathomable tediousness. If only you had a wire bending machine at your disposal. What a merry occasion would that be !

[@r.blohit4638]

Nyce bro

[@fixik179]

Круто получается! Можно и на ёлку повесить.

[@blyatskost]

Мне нраица

[@mskogly]

Clever to use double sided tape.

[@vitalin5953]

Вроде бы и интересно, но музыка на фоне не была бы лишней

[@dadasin7093]

Coming soon on alliexprees

[@rekhachoudhary6677]

This is the second time, I am asking this question.

[@Grek2456.]

Naice

[@rekhachoudhary6677]

Please reply.

[@yunikeil]

Ну что, поцаны, спамим гайверу?

[@sinsgluttony]

Илья Юнаков как он сделал поочередное мигание?)

[@yunikeil]

@@sinsgluttony мб задержка какая в светодиодах Я хз Но это явно из за светодиодов)0)

[@BijBijTCG]

Someone sell these on Etsy for me please

[@elstaso2323]

Ничоси

[@factormarketing5652]

🥰👏👏👏👨‍💻🤓

[@ollzix]

Класс! : )

[@Бродокалмакскийтракт]

Ничёси

[@UNITYMusics]

2068

[@mayurjain392]

2 ghost's 👻 disliked the video