Рет қаралды 195,729
In this video I show you how I regeared my Dana 60. This axle is from a 2005 Superduty and will be going into my Jeep Wrangler. This is a very complicated process and can be different for each install. This video is not a step by step instruction, but more of a means to help you decide if you want to do it yourself. Check out some more info online and do plenty of research before trying this yourself.
www.pirate4x4....
My final Specs:
Pinion Preload - 25 inch pounds
Backlash - .008”-.007”
Gear Pattern: Good haha
Be sure not to skimp on any steps! Make sure bearings are fully seated and lubed with gear oil!
Part numbers will be posted soon after I drink my coffee
5.38 Thick Cut Gears : amzn.to/2WRSF7t
Zip Locker 4.10 down Case (for thick cut gears) amzn.to/2UpzzJg
Master Install Kit amzn.to/2IhFNn0
1/4NPT tap amzn.to/2IqapTk
Calipers amzn.to/2WUzSIU
Dial Indicator amzn.to/2UIDyzP
Yukon Bearing Tool amzn.to/2C6O6yj