Install new tracks on the Gehl and do a land clearing job

In this video, I install new tracks on the Gehl CTL60 and then do a job clearing some land and installing a culvert

[@gwgrote5]

@9:51 Supervisor said: "That was easy!" 😎 I appreciate the time Jesse takes to explain the before and after the project(s).

[@supremelandscapes]

Really like this type of video Not a big job but not a small one either, still requires experience and the right equipment - your crew did a good job, thanks for the video Jesse.

[@RustyNail5856]

That place is looking better and better every time you go there, keep up the good work.

[@Geekn4sty]

I had a good laugh at 9:44 "That was easy." He just makes it look easy. These kids will learn to appreciate the skills of the old man when they get out there and try it for themselves.

[@jmuller86]

yea that was pretty funny when I played it back

[@michaelfraser5723]

which kids?

[@larrycroft470]

Another outstanding job by Jesse!!! The man can literally do anything he sets his mind to.

[@njonebale7889]

I subscribed to you awhile back and I only seen four videos and two were of this field, good stuff!

[@allanmcleod3302]

Replacing the tracks and not the sprockets is a mistake I used to make those sprockets are so worn they will rip those new tracks up I do like the track pattern you chose great traction

[@pmiller7886]

Agreed, Jesse watches the money close though. If the new tracks get damaged he will address it before it goes bad.

[@derrillbalshaw1199]

A lot of Skid steer owners change the drive sprockets at the same time as fitting new tracks. It make the tracks last longer. Because fitting new tracks on old drive sprockets, wears the tracks out far quicker due to the worn teeth damaging the new tracks.

[@stuartandrews4344]

Wouldn't dream of fitting new tracks without replacing sprockets..

[@chillywilli]

It is exactly what I thought as well. You are suppose to replace both, because they wear out both at the same time. The new tracks are wearing more in the beginning because of the difference between the two.

[@jmuller86]

I didnt realize that you should do it every track change, I thought it was every other one. The sprocket doesnt look too worn to me

[@stuartandrews4344]

@@jmuller86 worn sprockets will accelerate the wear on the new tracks..

[@chillywilli]

@@stuartandrews4344 Chris from Letsdig18 recently swapped his tracks on the Takeuchi and in the video he explaines changing both because of this. @Jesse Muller Price at truckortrack seems okay, $380,- for the pair.

[@garywilliamson7493]

Perfect place to put a market garden Has it’s own water supply as ell , very nice

[@BassickS77]

Your sons have such a cool dad!

[@donaldelrod9172]

looks like a good start for a private air strip!

[@goldshieldenterprises692]

Changing tracks. Hands down the biggest pain in the ass of any maintenance!!!!!!

[@tombauer7330]

Jesse, good video. Thanks for posting.

[@the2060ish]

Good video Jess you guys do good work..👍👍

[@krispetersen9595]

Very interesting, you do a good job with these videos

[@pmiller7886]

Good stuff Jesse, thx for the video. 👍

[@Poppi2006]

Very satisfying video, from my easy chair. 😊

[@tc50cal888]

Looks great!👍

[@canvids1]

Where I live Jesse the bees are around by the thousands at this time every year as they do a lot of feeding I guess just before winter.

[@tillman1697]

Yeah! First LIKE!

[@bobjoncas2814]

...lookin' good, nice work, keep safe..

[@Shield.148]

Excellent! Great work !

[@bigbird2100]

Great video 👍 Jessie I see your getting the lad involved in some parts of the video ,will you let him run any of the machinery or he to young.Love the edit and time lapse.

[@bendigr]

time to upgrade to a battery powered grease gun. for these situations. that's a lot of pumping.

[@mrandrewdennis1]

Great video thanks for sharing.

[@blackbuttecruizr]

With all the land clearing you do, I'm surprised there is not a stump grinder in your stable. 😉

[@johnkranz4004]

Nice job Jesse

[@CranialAccess]

Looks like you are up in the Greenville NY area…..or even a little further north 😊

[@timg8138]

Go Guido! the mighty little forklift

[@colinratcliffe2454]

When you change Tracks one should replace the sprockets as well.

[@MySynthDungeon]

Here we go ...well said ,well done!! Cheeers!;-)!

[@raytalbot5890]

That’s the land you cut the gully thru to the old railway?? 🇬🇧🇬🇧👍👍

[@jmuller86]

yes

[@garylaszewski7380]

The only guy that changes out more tracks is Andrew Camarata. Those things are heavy, and more difficult than they look! I assume you are not going to cut the old tracks into small chunks, sign them, and send them out to your fans, like Andrew Camarata does! Ha! Looking forward to your finishing your house. Best wishes.

[@richardwalters1803]

Great work

[@bbrachman]

Just wondering. In the future, would you do this inside the new garage or still outside. Seems like outside works just fine. But a new, shiny garage....

[@kylejones2075]

Oh boy fine thanks for sharing

[@deathbecomesu4604]

Jesse, is there a reason why you ppl dont place the skid-steer in the back of the truck tray?

[@bruceblais7958]

Hi Jesse just curious which do you prefer the track or the tires seeing that you have both or they serve their purpose thanks for sharing have a good evening

[@ronfrance4041]

Depends. As a homeowner just doing things around your property, tires are far less maintenance and cost. But as a business owner, you can’t really beat a track machine.

[@jmuller86]

I like the tracked machine alot more, but wheeled machine is half the price usually so you could almost have 2 for the price of a tracked machine....that being said the tracked machine has unbeatable pushing power.

[@Mudslinger896]

how far down the road did that blue bar make it before saying goodbye to the trailer? lol

[@jmuller86]

I stopped right after the shot and took it off, I didnt realize it showed up on the film lol

[@jfv65]

if an old track is broken or completely worn out why not just take an angle grinder and cut it off? Would save a lot of time.

[@Sjanzo]

stinks like hell and sprays hot rubber around.

[@billbray8797]

Jessie is this same property from Nov 2020?

[@jmuller86]

yes

[@colinratcliffe2454]

You need a bee suite to finish that section.

[@scottcarpenter400]

You should look for a jack hammer for your excavator

[@michaellynskey7124]

Roughly how much are these tracks for a tracked skid steer this size, Are they only supplied by the manufacturer or is it possible to obtain these from a supplier 🇬🇧🇮🇪.

[@freetolook3727]

@25:50 Seems like a small pipe that'll get plugged easily.

[@TomGuimond]

Jesse I don't know if it depends on you or you tube but this video has no subtitles available

[@jmuller86]

thats weird, usually they do have it

[@125sm3]

Don't mind bee's, just not thousands of bee's 🤣🤣🤣

[@YPllayer]

I was wondering why you put the culvert in so high? Nothing was draining and you still had standing water in the ditch.

[@jmuller86]

it cant drain down any more than that, the bedrock is preventing it from draining more. I explained that in the end of the video

[@RichM1983]

Somebody get this man a Dewalt Cordless grease gun!

[@jmuller86]

i just ordered a makita grease gun

[@Cemilodmir]

Daha sonra izleyeceğim. ( i will watch later )

[@ohcrapwhatsnext]

A propane torch and 20 lb canister works great on bees, like flame thrower

[@HYUKLDER1]

Were they bees or wasps causing a problem by the trees?

[@casycasy5199]

thats a pretty big ditch and that pipe does not look big enough to handle heavy rains??

[@SantiagoCousido]

first

[@benedictoalarcon2388]

How good are Gehl skid steer buddy ?

[@jmuller86]

Good machines. They basically a takeuchi

[@art1muz13]

Interesting, whose property is that?

[@danielburgess7785]

I doubt that method was in the Gehl manual.

[@nickdorendorf7288]

What is the trailer length?

[@factfinder4839]

Aren't you supposed to replace the sprockets when you put on new tracks? otherwise they tear up the new tracks.

[@Mostafa-vs8bd]

I am still waiting for semi truck service and painting wheel or cleaning and repair

[@jmuller86]

it was on the list for a while but then a few unexpected things happened and I lost the time for it. I have moved that back to right after I finish the roof on my house, since I need every minute between now and freezing weather to get it done. I spent almost a month at my old house doing work to sell it, that was not planned for

[@mikeb1]

@@jmuller86 Has your old house sold now?

[@jmuller86]

@@mikeb1 yea its under contract. Should close in about 2 weeks

[@bastiaoemmiami]

25:25 Excuse me, but this pipe is very thin, and when it rains, the waters will overflow, flooding this part of the land.

[@jmuller86]

that pipe could be 4" and be enough to work. it does not run that much water

[@golfmc78]

Which quarry is that?

[@jmuller86]

gallivan

[@golfmc78]

Ok thought it might have been pleasant valley 👍

[@smudger797]

🤠

[@lineman860]

How’s the gehl holding up

[@jmuller86]

It has been a good machine. No problems

[@staygreasy]

42:40 Looks a bit like poison ivy.

[@tricksfixx8303]

292nd!!

[@محمدالزهراني-ق7ع8غ]

✅✅✅✅❤️

[@moirani2021]

💚🤍❤💯💯💯💚🤍❤

[@curtisharlan9230]

Hello Jesse how old are your parents

[@enduser1982]

Jesus, thought you'd have electric grease gun

[@jmuller86]

just ordered one

[@deeper4cheaper128]

😂

[@deeper4cheaper128]

One of the best tools that you can own if you own equipment!

[@ayobbellatrache9940]

ه تم او ممكن ق يجي شي مع نز

[@jamesmerkel9442]

Just wrong way wrong approach heading down wrong trail w/these bands, & nothing remotely out there to improve them. They r so bad makes tractors look good work around.

[@johncorreia9041]

start it and put left skid in drive

[@danieljameschamberlin1726]

Did you save some of the nice rocks to dress up the entrance and exit of your culvert bridge?

[@freetolook3727]

Are those tracks generic? That is do they fit most, if not all, those mini loaders?? And does it matter which way the tracks go on???

[@ivrunner5043]

nice job, got a lot of track "experts" in the comments this go around , probably never even sat in a skid steer before. lol. keep up the hard work.

[@gayle4804]

Beautiful property and a job well done thank you for taking us along

[@JJ-gd7gf]

Nice job on the track replacement. Good thing you have another forklift to assist. I'd hate to watch several guys change out tracks by hand.

[@chrissmith513]

You should replace your sprokets every time you replace the tracks otherwise they will get worn faster ! 👍👍👍

[@TedPollard]

Also would work is ratchet straps or tie down chains with speed blinders. Just rap around the tracks

[@qcan8468]

Jesse … quick tip. Put a plastic bag under the track tension grease zerk and then loosen. Makes cleanup of the old grease so much easier.

[@thisolesignguy2733]

I know alot of people will be like "what to you need a forklift for? can't you just pry it off and back on?" These tracks are between 350-575lbs, it's not that easy. These guys just prove that it's not their first rodeo. Great job guys, it's definitely not as easy as you made it out to be.

[@jmuller86]

yea its alot easier on a rubber tracked excavator but similar too

[@pyronixe]

What do you do with the old tracks? Do they still have some value?

[@raymundo7687]

@@pyronixe spare in case of emergency, but also make a great drag if you cut it in half.

[@robertbrewer2190]

@@pyronixe He said he would keep them as spares.

[@horstszibulski19]

@@pyronixe was asking that for myself, if they are completely wasted how would you dispose them of? Would a scrapyard accept them or are they going to landfill?

[@robmosher362]

Nice Job Jesse. Wishing you great successes. Your lad is growing fast.

[@michaelfraser5723]

probably a mistake ' keeping them as spares', l mean if they were good, you wouldn't have noticed them failing; road to hoardem

[@jmuller86]

they are good if you bust a track and need to use the machine while waiting for a new one

[@mikes7639]

You should use 2by4 softeners on that new tread

[@andrewbrenneman9592]

With that trailer, might think about using some wood blocks under the rear when loading & unloading. That should stabilize the back from dropping.

[@barryhitchcock4491]

I love your videos. I guess you did require your excavator after all, good thing you brought it.

[@Mostafa-vs8bd]

One of reverse light on dump truck is broken. If it is legal please put orange turn signal on it Red mixed one with brake light are bad

[@seafieldgrant6957]

Great work ! On to bigger jobs and bigger equipment ! thanks for sharing your video.

[@Mostafa-vs8bd]

Hello

[@christopherbird7119]

It alway makes me chuckle to see someone trying to look over their shoulder to reverse a mini excavator on to a trailer when it's easier to rotate the top of the machine 90 or 180 degrees and have a perfect view of where you are going.

[@daddybob6096]

Love the split changing there Jesse, expertly done, LoL. Bob.

[@MattyDardani]

Great job Jessie the editing is fantastic! I like this style

[@fudgea]

While I was watching I thought you had worked on this land before. I enjoy your videos and also watch Dan Wheeler's and Andrew Camarata's videos. Gravel must be very cheap in your area.

[@toddincabo]

Thanks for sharing. They will have to address that rock ditch, we're talking mosquito city!

[@russellsmith3825]

Baby's got new shoes....

[@russellsmith3825]

A brush cutter/ bush hog for the skid steer would help tons

[@russellsmith3825]

Regarding the bees, those yellow flowers look like goldenrod the last nectar flow of the season so the girls are working like crazy to stock up for winter

[@LuKifUA]

Jewelry work. A loader is more precise than I am a steak with a fork.😊 Good job

[@CranialAccess]

“That was easy!” Glad that you had that in there! Made our day!😂

[@timberhitchllc]

Register that culvert with Post10 so he can check in on it and keep it running clear!

[@vinnyhern]

I think your working harder than you have to, buy or make a grizzly bar for the dozer!