Joe Rogan’s UFO | Resin Casting Tips & Tricks

[@trojanman22]

Absolutely INCREDIBLE. How the hell you have less than 19k subs is beyond me. You’re a true craftsman and an inspiration. Keep making more videos

[@MattsWoodworks]

Definitely putting out more videos! Lots of fun stuff coming up! Really appreciate this comments I’m working hard at it :)

[@michaelclary2267]

That is freaking beautiful!! I am dedicating all spare time I have to learning this craft. Seriously,well done.

[@MattsWoodworks]

Thank you Michael! Do it!!

[@kellyjean4981]

Damn!! I love this. You did an incredible job. What’s up with your fridge?!? You must have had a heart sinking moment. Would be super cool to see if this finds its way onto Joe’s podcast

[@MattsWoodworks]

Thank you! I woke up and saw that and lost my mind, like how does they even happen first off, and then to this irreplaceable can. I got damn lucky! Haha. I hope I’ll see it someday on the podcast :)

[@dmarriso2003]

I came here after Blacktail mentioned you. I look forward to see your stuff.

[@MattsWoodworks]

Thank you for the sub!

[@lou2408]

Love everything about it, the only thing I would change is maybe tilting the ufo like its flying up

[@pleaseholdtherecognition225]

Honestly you have top content don't sweat it, perseverance will make you stronger keep up the positive energy 💪!!!

[@MattsWoodworks]

Keep on rolling!🤘🏻

[@trenchtown69]

Blacktail props - I enjoyed this video and admire your ability to see so far ahead in the project. It came together so nicely in the end and making a tractor beam part of the design is just genius... Very nice and well executed all the way to the end!

[@cherylmartin7435]

Love your work and your content. All the pieces are incredible. Keep up the great work!

[@MattsWoodworks]

Thank you Cheryl!

[@samvaldivia3933]

Bro, this came out so sick.

[@MattsWoodworks]

Thanks man much appreciated!!

[@smartiesubunk2thnubuts397]

subscribed, compliments of blacktail studio's

[@MattsWoodworks]

Awesome!!

[@puritan745]

Same

[@Atlantismonkey40]

The final look is ( ), I’m lacking the words. If I could say, as a life long sci-fi fan. Phillip head screws are not recognized. I’m glad I found your content. Outstanding work.

[@DettorreCustoms]

Killer brotha. Not surprised though. Your work always slays

[@MattsWoodworks]

Thanks brotha!🤘🏻

[@eyecandy-gaming]

very cool. thanks for making the video

[@MattsWoodworks]

My pleasure!

[@puritan745]

Wow what a surprising and absolutely stunning build! - Perfect for Joe Rogan too!

[@bobbyvisconti6769]

Awesome work Matt.

[@MattsWoodworks]

Thanks Bobby!

[@MrGeroth]

Awesome job.

[@MattsWoodworks]

Thank you Gerald!

[@JasonPeltier]

Amazing work! Handling those unique items for a client turns up the pressure a couple notches. ;)

[@MattsWoodworks]

Thanks Jason! Yea man I had one shot, sweating some bullets for sure haha

[@mariushegli]

I have nothing to say really, but I appreciate your content, and wish to help with the yt-algorithms.

[@MattsWoodworks]

Thank you very much! 🙏🏻

[@jasonburns6411]

Unreal job sir!

[@MattsWoodworks]

Thank you Jason!

[@tvardy00]

Well done.

[@MattsWoodworks]

Thank you!

[@jamesquigley8628]

Cool stuff, Be Well.

[@MattsWoodworks]

Thank you for the support James

[@thebrothersbarn6094]

This is so awesome. GREAT JOB!

[@MattsWoodworks]

Thank you very much :)

[@WiiNESticles]

Awesome job!

[@MattsWoodworks]

Thank you!

[@michaeldrechsel807]

Nice work bud! Keep it up

[@MattsWoodworks]

Thanks Michael! 🙏🏻

[@Atlantismonkey40]

I totally get what your saying about the marking of the CA glue. If you CA glue the item, then put it upside down while glue cures. Would that not detour the marking?

[@JK-dk8ec]

That is bad ass you are extremely talented....so jealous

[@MattsWoodworks]

Thank you, don’t be jealous!

[@ggomen08]

Matt, you're the man!

[@MattsWoodworks]

Thank you!

[@thefourstooges2376]

you should post another video of him opening it

[@MattsWoodworks]

Was hoping to get that footage, if I do I will!

[@maddieadams75]

Nice designs 👽 ❤️

[@MattsWoodworks]

Thank you Maddie!

[@johnc6343]

Very Nice

[@MattsWoodworks]

Thank you John C

[@aprilpatte6397]

I really like this very nice job what a nice opportunity!

[@arrowheadtileandstone8973]

Dude! So cool!

[@MattsWoodworks]

Thanks so much!

[@streametal]

fantastic work! @youtube bad algorithm. this vid need more than 100k views!

[@l.k.1011]

I dig your style!

[@MattsWoodworks]

I appreciate that!

[@3plecrown]

Nice content Matt! I just subscribed and already have a question.😁When do you use vacuum system instead of a pressure pot?

[@MattsWoodworks]

I believe a pressure pot is for stabilizing wood, honestly do not know 100% though

[@3plecrown]

@@MattsWoodworks A vacuum chamber is what I use to stabilize wood. Everyone I have seen use resin uses a pressure pot. It seems a vacuum chamber would be to slow and wouldn’t remove the air fast enough. Like you I’m not 100% sure.

[@JS-wc4xs]

What about using a pressure pot vs a vacuum chamber/degasser?

[@MattsWoodworks]

Honestly I’m not sure, the only reason I’d suggest chamber is that once it’s sucked down you can throw it into the fridge. If it’s not a large volume pour then I’d say yea for sure use the pressure pot because you leave it in there until cured right?

[@JS-wc4xs]

@@MattsWoodworks yup. Pressure pot is designed just for that (leaving it in till it cures).

[@WiiNESticles]

Hey Matt, what is that expandable foam stuff you used to custom form for shipping? That is super smart! Awesome build, great craftsmanship! Keep killing it!

[@MattsWoodworks]

I used the cans from Home Depot, it's called "Great Stuff" window/crack expandable foam. Thanks for the love!

[@WiiNESticles]

@@MattsWoodworks You're the man, thank you this is going to help me so much. Learning so much from your videos!

[@MattsWoodworks]

@@WiiNESticles my pleasure! Thank you for the support!

[@WiiNESticles]

@@MattsWoodworks You mind If I ask you one more question, I didn't see you list it in your description materials list, but what thickness acrylic are you using? do you use a mold release on it before the epoxy pour? and what was the special acrylic bond glue? Thanks again. curious to try one of these for a friend.

[@mmceldu2]

That's amazing 😍

[@americanhomelessfirst7689]

Very cool.if you could have used a pen light to shine down on the can like beaming it up would have been wicked cool. Either way awesome I never seen it on his podcast but I don’t watch it all the time either

[@thevtqueenofsnow]

Impressive!

[@mschanee]

Sooooo🤔...its been nice...👍🏽

[@MattsWoodworks]

Thank you!!

[@DrJackJeckyl]

Subbed from Blacktail!

[@MattsWoodworks]

Rock on!

[@manuelrosquete6818]

Well... If you like Joe Rogan , I like you , 👍 subscribed.

[@MattsWoodworks]

rock on!

[@adamakaru2683]

Hoi Matt, your friend at "Blacktail studio" recommend you, so I think he was right about you thank you. I am watching all of your videos starting today Ap/29/2022.

[@dylanbyrne9591]

Well that's awesome, I think you didn't align the philips heads just to piss me off though. If joe mentions you, I think this channel will splode. Here because of Blacktail. Good channel.

[@stephenrogers9461]

G'day from 🇨🇦 eh ! Blacktail said to have a look so l did.... Staggered man completely staggered ! Keep kicking ass it's going to be a complete pleasure watching you march to a million and beyond !! 🤟👽

[@MattsWoodworks]

Thank you my man!!!

[@joshbauer2223]

Time to unsubscribe unfortunately. Not really into someone supporting Joe Rogan.

[@MattsWoodworks]

Ok Josh, have a good day buddy.

[@dougveazey2036]

@@MattsWoodworks I support free speech and Joe Rogan.

[@daleyotter4607]

Bet you have never even listened to his “controversial” podcasts or done anything other than accept what to be told