Joe's Pinhole Cameras - Part Four

  Рет қаралды 1,388

Joe Van Cleave

Joe Van Cleave

Күн бұрын

Пікірлер: 12
@genegoranov5865
@genegoranov5865 4 жыл бұрын
Real fun to watch you , gentlemen!
@typepals
@typepals 4 жыл бұрын
Finally got caught up on this series in one long marathon. Wow! Fascinating stuff. I love photography, but wouldn't have the patience for making my own camera. My favorite in the series was the one with multiple lenses in part three. That is a thing of beauty and one could be so creative with it. Did you ever open multiple lenses without moving the camera? I think it would be interesting to see the same scene in different sizes. One could even do the exposures a half hour apart and get a progression of light and shadows. Great stuff as always, Joe!
@FabrizioZago
@FabrizioZago 4 жыл бұрын
Incredible cameras, fascinating. I would't have the patience for this, but pinhole interests me. Intersting channel, subscribed.
@davidweiss7411
@davidweiss7411 4 жыл бұрын
Super series Joe! I really enjoyed all of these cameras. Mine are much more pedestrian but I do have one where you can adjust the focal length by moving the paper back and forth into different slots. I have been using foam core but might try some plywood this summer.
@wiwythebest
@wiwythebest 4 жыл бұрын
amazing cameras!
@AdricM
@AdricM 4 жыл бұрын
Yeah!!! Get Crazy at Quelab!
@DavidALovingMPF102
@DavidALovingMPF102 4 жыл бұрын
This is another great video! Like the photos too. Have you tried shooting the moon??
@jameskyle4807
@jameskyle4807 4 жыл бұрын
This is so CooL. Again I thank you, Joe Van Cleave. :-)
@reynaldocastaneda4712
@reynaldocastaneda4712 4 жыл бұрын
Hi Joe. How did you make your pinhole lens? Need to know because yours are sharper. Thanks in advance.
@Joe_VanCleave
@Joe_VanCleave 4 жыл бұрын
I need to make a video about this. I use .002 inch thick (2 mil) sheet brass. I make a dimple with a metal punch, sand the tip of the dimple down with fine emory paper, then pierce the tip of the dimple with the tip of a pin. Then I sand the dimple further, measure the opening with a magnifier and when about the right size clean up the hole with the needle to make round.
@reynaldocastaneda4712
@reynaldocastaneda4712 4 жыл бұрын
Thanks Joe. I will try it. 👍
@sauron9883
@sauron9883 4 жыл бұрын
Hey Joe! Did you know that margin release key on Hermes 3000 can be also used to release jammed keys ?
Joe's Pinhole Cameras - Part Five
12:35
Joe Van Cleave
Рет қаралды 1,2 М.
Paper Shoot Camera
13:09
Joe Van Cleave
Рет қаралды 2,7 М.
Хаги Ваги говорит разными голосами
0:22
Фани Хани
Рет қаралды 2,2 МЛН
Thank you mommy 😊💝 #shorts
0:24
5-Minute Crafts HOUSE
Рет қаралды 33 МЛН
$1 vs $500,000 Plane Ticket!
12:20
MrBeast
Рет қаралды 122 МЛН
Typewriters for Newbies
14:42
Joe Van Cleave
Рет қаралды 3,3 М.
Downsizing Your Typewriter Collection
19:54
Joe Van Cleave
Рет қаралды 1,6 М.
Typewriters and Making Corrections
22:40
Joe Van Cleave
Рет қаралды 2,4 М.
Typewriter Typing Cadence
17:27
Joe Van Cleave
Рет қаралды 1,9 М.
Mail Time December 2024
12:49
Joe Van Cleave
Рет қаралды 537
The benefits of using a typewriter to write novels and poetry.
7:30
Classic Typewriter
Рет қаралды 16 М.
Typewriter Line Spacing
22:33
Joe Van Cleave
Рет қаралды 694
Multi Strike Film Typewriter Ribbons
17:32
Joe Van Cleave
Рет қаралды 813
Olympia SG1 versus Royal KMM
28:32
Joe Van Cleave
Рет қаралды 1 М.
Typographical Typewriter Fun
21:11
Joe Van Cleave
Рет қаралды 1 М.
Хаги Ваги говорит разными голосами
0:22
Фани Хани
Рет қаралды 2,2 МЛН