BIG SHIP STERN TUBE AFT SEAL - INSTALLATION AT OMAN DRYDOCK -

A stern tube with bearings radially supports the propeller shaft from the main engine. The stern tube is a hollow tube which accommodates the bearings, the seal boxes and the propeller shaft.
The stern tube is filled with oil, grease or water and forms a barrier between the water outside and the engine room inside the vessel.
The main advantages of stern tube aft seal’ are:
Short built-in lengths due to integrated guard.
Very good protection of the propeller shaft system against sand, debris, (sea)water, etc.
Aft seal is applicable within oil lubricated, grease lubricated and closed - l
CLASS type approved.

[@abdulkhakiqkrishnan3235]

Chief Joel - That was me in the video, thank you, Hope you can visit us again here in Oman Drydock.

[@aieshazuleyma8563]

That was huge, so happened to glimpse also on the propeller below it was so big, your job chief is really complex and interesting.

[@jackstewart417]

This video does not show the engineers replacing or putting in the new Seal Material. It just shows them pushing the Seal housing up to the shaft housing.

[@samirmalik2676]

Wow thanks for including us on your video - hope to spread knowledge in Marine Engineering

[@asiaruby4167]

Learning a few about ship parts with your upload

[@quantumstorm4531]

There is no such regular hours of work in your Job men! Keep uploading interesting video with regards to Ship

[@arnulfosumawekwek]

Seafarers is jack of all trade and regular hours is always broken.

[@ashleyjeon3873]

Learning so much with your videos with regard to ship

[@exceedmanpowerservices6537]

Thank you for sharing

[@LouiseArchery]

Good info.

[@1mw4tch1ng]

I know they are professionals but sliding the outer seal of the main ship bore shaft on the prop shaft can be nicked and scratch. any seals installed between the damage shaft 5:22 can fail and leak. While hammering the out seal in place for nut insertion the hammer can accidentally hit the prop shaft and damage

[@hassimabdulah5993]

Hi Chief that is our team taking care of your Ship

[@mayumisibulo1772]

Good info

[@uwekpalasak8893]

First time to saw stern tube seal being installed

[@tomahawkhans1686]

The wonder of engineering with this special sealed.

[@xavierusgamilde]

Interesting

[@JesiccaDaculcol]

Great Job

[@kristen7378]

Your ads are amazing

[@luzzcess7358]

Really amazing how seafarer conduct their job

[@dodongdakotv689]

Thanks for sharing your knowledge sir.👏

[@andrekasim6461]

Good job bro

[@arnulfosumawekwek]

Interesting job you have

[@aliyousof5791]

This is really good Chief

[@mayumisibulo1772]

Woah!

[@JollibeeMcDonald]

This is very interesting job, engineering at its best.

[@woodypioneer]

Very informative

[@jobsseaman477]

Wow, so that is how it's assembled.

[@KCdelicaciesLacsib]

Keep posting.

[@ChrisvinTambatoy]

Good information mate

[@SherlilouAlbandonate]

Good job guys

[@woodypioneer]

Nice experienced

[@marinerongfilipino5812]

This is huge propeller

[@vergarasibulo8436]

Oh no, that is a huge piston

[@JoshuaDavidLacsib]

So that's seal the water going inside the Ship

[@kirstenbelleocampo5604]

it's big stern tube seal

[@user-rx8lm6og8q]

Hllo poh ser powedi ba mag tanong

[@carleighocampo216]

Life's of a Seafarer no normal working schedules, needed to sacrifice to work away from their families

[@realistn9343]

The brand seemed to be Lagersmit, Holland....