I Put an ENGINE on a Giant Paddle Board to Make a DANGEROUSLY FAST Fishing Skiff

[@JoeOceanside]

Use code 50JOEOCEANSIDE to get 50% OFF plus free shipping on your first Factor box at bit.ly/3OsMgwy!

[@luxcars2849]

Old school in the ocean was the best part man he’s a G

[@FlCoastalcaster]

Old school is enjoying life on that skiff, he makes a amazing friend, thats one dude I would take to a family barbecue at the beach and hear great stories

[@JoeOceanside]

Yeah Old Skool has alot of stories 🤣🤣🤣

[@FlCoastalcaster]

@@JoeOceanside We should do a podcast with him im in Miami Beach fl my skiff is almost done soon

[@adhdandme]

MAKE THAT a center console boat!!!!

[@JoeOceanside]

Yeah that would be cool, i would have to do cable steering though

[@C4_Corvette_man]

​@@JoeOceanside it's not hard

[@0xKruzr]

@@JoeOceanside looks like that motor has the tube support for the steering cable, idk how you would set up the remote for the throttle but there's probably a kit somewhere for it. the main thing is exactly what you pointed out about the fore-aft flexibility; if you could stiffen it up somehow that would really be ideal.

[@joshmaitie5954]

The bow might be an issue

[@africaster]

If you did extend the side boards to the front, you’d have at least 3 additional improvements… #1. Entire board would be stiffer #2. You could put in a cross piece and move your tackle box to the middle for better weight distribution AND it becomes a potential seat #3. You could put in a cross piece at the front and attach “reins” to hold onto when at speed. Great build, thanks for sharing 🖖

[@JoeOceanside]

Yeah that's a great plan, definitely will try if I step up the hp

[@leengroen9754]

@@JoeOceanside fill it with epoxy foam😉

[@pieterbezuidenhout2741]

You reading my mind ? 👍👍👍👍👍👍👍👍

[@africaster]

@ … kan wees 🤘

[@dustinwilson492]

Dude this was another unexpected sick build an old school was really ripping around man definitely made me smile.

[@JoeOceanside]

Thanks! Yeah he was an absolute madman on that board

[@ultimatercadventures9167]

I run a 14' aluminum V-hull with a 15 hp Mercury tiller with an extension. I like to stand in smoother water and have a platform up between the front seats for fishing. Rough water if you sit in the stern, the ride is much smoother than forward. I love how your SUP skiff is laid out. 9.9 hp sounds fun. For standing, a rope off the bow helps with your stability a standing post even more so...

[@JoeOceanside]

Thanks, yeah it definitely needs rope or handrail

[@tincanforacup2745]

You can see how much more driving experience the old man has when they are both riding it together

[@JoeOceanside]

LOL, yeah he knows his way around a boat. Thanks for watching

[@stevensinger8486]

9.9 Tohatsu/Nissan two strokes are the lightest you can find.

[@JoeOceanside]

Ah ok that's good info, I will look into the 9.9

[@ct1762]

you mean the 9.8. but then again didnt specify 2 or 4 stroke. the 8hp and 9.8hp are the same block and weight the same as this series of evinrude/johnson 2 strokes. not sure if he has a 6hp or 8hp here but the 8hp is a whole different animal than the 6hp.

[@ct1762]

@@JoeOceanside the 9.8 2 stroke was around 58lbs. the 9.9 was way heavier at around 90lbs but had a much larger block

[@davekenyon9582]

Wow great build. Your skills are evident. Very versatile. Loved it. Keep it up Joe. You never cease to Amaze me with your skillzzzzz. Old school was fired up on that thing.

[@JoeOceanside]

Hey thanks! I'm glad you liked the buildout! Yeah Old Skool went crazy on that thing

[@PenkillerDIY]

Cool dude! There are contraptions of three people bench seat with shade that attach to two side by side paddleboards and have transom for an outboard. So the same, but more comfort!

[@FloridaWaterAdventures]

I like Old School, no life vest.

[@JoeOceanside]

LOL. I had to force him to wear it

[@fabfafa]

This is a very clever build, respect from France 🇫🇷

[@JoeOceanside]

Thanks!

[@OdilonHeckman-fm1gi]

A lot of fun, whith low cost 👏👏👏

[@JoeOceanside]

Yeah for sure!

[@TrophyFish]

Agree with previous comments. Take the boards to the front with some cross members and a chair mid ship should really make it more comfortable and stiffer. Maybe even a couple of metal tubes running parallel with a sliding weight you could pull and push with some cording and pulleys?

[@JoeOceanside]

Yeah I agree, the sliders sounds interesting

[@thorlaizans3384]

Awesome!!! I have put together a few inflatable sup's with gas outboards. When I saw that same monster board on Temu a few months back I didn't hesitate to buy one. I got some simple glue on fittings and put a motor mount on the back with a lil 3hp outboard. After seeing your build I have to step up my HP for sure. One thing that really stabilizes the board for me is I have a nice boat chair that I can strap on the middle of the board/ that's where My Puppy sits and I stand behind it and use it to hold on to. Furthest I have gone was 14 miles and that was with 2 people on the board. I use it for fishing and lobster fishing. Im thinking about taking it to Catalina island 38 miles offshore.

[@JoeOceanside]

That's awesome, very cool. Yeah it's a high quality board for the price. Thanks for watching

[@claudedupas1063]

excellent, super concept a développer

[@JoeOceanside]

Thanks you sir

[@michaelwigley8856]

I would run the 2x6 boards all the way to the knose and then put a couple ratchet straps around them so the paddle board wouldn't flex like that. Then i would make it a center console with a nice seat so its comfortable.

[@JoeOceanside]

Yeah that could work, I don't know about the straps though, I guess the board could handle a bit of squeeze from the straps

[@jrbuch]

Dude that thing is wild!

[@MichaelDouglas-sp5pp]

Very cool. I would extend the skids up to the next hand straps. That would give you more stability and mounting space....should help with speed safety.

[@JoeOceanside]

Yeah I think that's what I should have done

[@projectsdontstop8441]

I would build an upside down U shaped grab handle that goes across the front of your wooden motor mounts. It would stiffen up the mount and give a spot for front and rear passengers to hold on to. Similar to the one's on little skiffs. beef it up with braces or guy wire it with rope to the handles depending on how strong those handles are. At it's simplest, a rope between the handles to hold onto. Awesome build. Old School looks like he's having a little too much fun.

[@JoeOceanside]

Yeah, i would like to put a stabilize rail on it. Yeah Old Skool still gets crazy sometimes

[@ralphcox7128]

Awesome job on the paddle board definitely put a bigger engine on it

[@JoeOceanside]

Yeahhhh! Glad you liked the build

[@FarmerFpv]

You can extend those side pieces with 2x4s to the front to stiffen the board so it doesn't bounce or flex as much. I turned one of the smaller TEMU paddle boards into an RC rescue boat for My RC planes. I used a brushless motor and an airplane propeller like a swamp boat so it wouldn't get stuck in the weeds. It is nowhere near as fast as that. That thing is bananas. lol

[@JoeOceanside]

Wow you turned a paddle board into RC?

[@publicdefender77]

Cool rig!! Love the little rude

[@JoeOceanside]

Thanks, yeah she purrs still

[@adamnash2009]

Dang, this is so good.

[@JoeOceanside]

Thanks!

[@tls81484]

There are a lot of small flats canoe/skiffs that are meant to run while standing. A lot of them have a small u type rail that mounts to the floor and you hold when standing. Look at a Gladesman canoe. If you had a bar that would fold up and lock in place between the forward arms of the bracket, that would be great for standing and fishing. You could include cup holders and tackle tray, rod holders. There are lots of ways to accessories that.

[@JoeOceanside]

Yeah definitely needs a stabilizer rail for standing

[@tomhobbies6888]

Myself I would have run the side motor braces all the way to the front of the the paddle board . Awesome video dude. Love the vids later

[@JoeOceanside]

Yeah that's what alot of people are saying. I should have done that

[@manny8142]

Awesome dude

[@JoeOceanside]

Thank you sir!

[@dozer8065]

i would run the beams all the way to the front and maybe even make a sub floor, then go with a 9.9 hp, also play around with gas tank placement... awesome build bro!

[@JoeOceanside]

Yeah, I thought about adding a hard deck, but I didn't want the extra weight for transport. Maybe if I go bigger I will try that

[@johnclarke3197]

So much fun 😁

[@JoeOceanside]

Yeah for sure

[@RailBuffRob]

Build what is essentially a stupidly fast and powerful R/C boat that is molded to fit the stern of the inflatable board. Set it up to be controlled via an Arduino board by a waterproofed wireless version of your favorite console video game controller. I'm thinking a Wii Nunchuck would be pretty ideal to control a super fast paddle board. Maybe find some really fast R/C boat motor assemblies on Temu and just have like 30 of them on there running off an ebike battery. Find some flexible solar panels that are durable enough that you can cover the deck with them and they can collect light when you're not standing on them, or whatever light you're not blocking. Incorporate a bluetooth audio system into the motor enclosure that puts out music at a volume and quality that people will say you have no business having on a paddleboard. This could also double as a horn, you could set up a button to blow the sound of a massive ship horn or something. Top it off with a flagpole that handle a small American flag and a stern light. If you really wanna go next level, find some epoxy that works with this material well enough that you can cut some holes and install legit rod holders, cupholders, lights, speakers, everything else right into the inflatable board, although a lot of consideration would have to be taken for deflating and folding it.

[@JoeOceanside]

Wow that's alot. I don't think I'm smart enough to engineer all that. Thanks for watching

[@johnjudd1840]

Awesome build man, please do more!

[@JoeOceanside]

@johnjudd1840 hey thanks! I'm glad you liked it, this was probably my funnest build yet!

[@F-N-C]

Dude that was sick

[@JoeOceanside]

Thanks, glad you liked

[@aminathsuha1666]

New dream unlocked!

[@JoeOceanside]

Yeah, it felt like a dream flying over the water. Thanks for watching

[@aminathsuha1666]

Watching a sec time!

[@nealp.2841]

I've been contemplating building my own version but with jet ski propulsion

[@BarefootBradley]

Needs a 6.5hp long tail setup for the marsh for some sick videos

[@JoeOceanside]

A few people have mentioned the long tail. I'll look into it

[@seansysig]

10 hp is perfect!

[@JoeOceanside]

That would be awesome

[@Daniel-ww3hl]

Old school was ready to RIP 🤣🤣👏👏

[@JoeOceanside]

Yeah he got that thing moving

[@ct1762]

just a tip from a 20 year OMC mechanic: the impeller and t stat need to be replaced. indicator flow / telltale means NOTHING other than pump works! its the cylinder head temp that matters. after a few minutes the t stat opens and should start spraying water out the exhaust reliefs. look for 125-155f at the TOP of the head at idle. i didnt see much water coming out the relief at speed just exhaust, so you want to be darn sure its cooling correctly.

[@JoeOceanside]

Yeah I will have old skool double check it, but I think he just threw an impeller in it recently

[@AllAroundTube50]

Dope!

[@JoeOceanside]

Thanks! Glad you liked the build!

[@CraigUnderC]

Another awesome build Joe! If it was only a more rigid board to prevent those nose dives. Would love to dive and or fish with you someday Joe.

[@JoeOceanside]

Thanks, yeah it really should be fiber glass

[@Yrocsrelles]

I bet you could run those boards all the way up to the front handles for more rigidity

[@smilesmile199]

Мне понравился твой помощник, очень жизнерадостный и весёлый! Я бы не рескнул за ним повторить :))))

[@JoeOceanside]

Thanks!

[@perlago21]

this is awesome and it handles that putboard no problem wow sir well done nice vid

[@JoeOceanside]

Thanks man! It was way also more fun than I thought it would be. It definitely can go to the next bigger size motor

[@octapuslol]

Pls add more support towards the front the bigger motor mean more weight on the back. This will help with the nose dive. Even if you can make some walls over the edge so you have balance. Nice video keep it up😮😮😮😮

[@JoeOceanside]

Yeah thanks! I thought about making the boards run all the way to the front, that could help with the flex. But I was trying to balance between strength and portability and trying to keep it small. Also I should pre bend the boards so they have a slight upward curve toward the front, it might help light the nose more. Good observation, thanks for watching!

[@alanmouraes9293]

If you extend the 2x6 to the front holder, maybe you could have less bounce

[@JoeOceanside]

Yeah, I think that would stiffen it up a bit

[@revodrvr]

Tie a rope to that front handle of the board with a little trangle handle on the end to hold urself forward with. Will also help the nose stay up

[@eric5766]

Lol this is sick! I also did this with my 4,5hp😂😂 this looks whay cooler

[@JoeOceanside]

Thanks! Wait what did you put it on?

[@eric5766]

@@JoeOceanside on a surfboard/supplank, it was realy dangerous tbh so we did it once hahaha. Yours looks whaayyy cleaner

[@eric5766]

@@JoeOceanside i should finish the vid tbh

[@oakwaterjimmy]

you should run the boards all the wa to the front and put a cross brace with a grab handle. if you go all the way to the frornt with the boards it would stiffen it up

[@JoeOceanside]

Yeah I agree. I was thinking about connecting them across with pvc to make a hand rail

[@tommikiel6644]

Incredible build but i would use a mercury 15 as it is as light as a 9.9

[@JoeOceanside]

Oh OK, good to know

[@jinsvi]

Pretty sick

[@sergethecarhauler795]

I have the same board, made a mount for a 36v motor. Works great with a anchor 2 miles out at sea

[@JoeOceanside]

Cool! Wait, where are you boating at? 2 miles out to sea for me is like 400 feet deep, no anchoring there

[@mrdoodiehead1642]

Can't believe how that things Rips with just a 6hp ! Very cool build with room to grow and improve

[@JoeOceanside]

Yeah it was surprising how good it actually performed

[@jonnykustoms]

Make a horse reins, that’s what I use to standup on my boards

[@JoeOceanside]

Yeah that's an easy quick way to do it. Good idea

[@joshmaitie5954]

Your a genius loll

[@JoeOceanside]

Hey thanks!

[@sarahdegroot8997]

I will saybit again, I love your builds. I actually saw this board on Temu before black Friday and thought of your amazing builds.😅 Would you be open to doing a more detailed video on how to wire in a kill switch to the Temu motors (electric and gas)?

[@JoeOceanside]

Hi! That's great thanks, I'm glad you liked the build. Yeah I am really impressed with the quality of that board. I don't know about making a KZbin video of the kill switch, but the next time I install one I will film it more detailed and email it to you. You'll need to go to my about section and find my email address and send me a reminder

[@sarahdegroot8997]

@@JoeOceanside 🥰

[@sonnygoode6553]

Very impressive! Thanks for sharing! Looking forward to more on making this a fishing platform!!

[@JoeOceanside]

Thanks! Yeah I need to actually catch fish on it now 🤣

[@joshwhite9211]

I have several of those 6hp engines they are great engines easy to work on. Ps the warr is void 😂 but well worth it

[@JoeOceanside]

LOL, yeah i missed the warranty by just a bit 😅. Thanks for watching

[@jimmyconway8025]

That's great

[@bigsnacks_tv3809]

Extend the two boards all the way up

[@JoeOceanside]

Yeah good idea

[@johnbradach8475]

You should have connected the forks of the forks with another 2x6 and used the pack out system to make a center console

[@JoeOceanside]

That could work, I was trying to keep the center of the deck clear. That's why I tried to keep it all to the outside. Alao thinking about making a rack or something that goes above the motor, like a polling platform

[@simonshock5532]

Hey throw another board across the front where u put the handles. So a cross board from left to right with a couple straps in the middle so u have something to hold onto. Plus the board will give u a lil extra weight that u need plus handles for when needed lmk wut u think?

[@JoeOceanside]

Yeah I thought about, and maybe putting a hand rail across

[@TheClintB]

That mount would have been much stronger if you had just used regular wood glue. Just for future reference, if you can clamp the boards together, so you get a flat surface against a flat surface, the wood glue will join the wood, and will be stronger at that joint than the wood itself. Without screws or anything. I'm a woodworker, so I enjoy all that kind of learning.

[@JoeOceanside]

Thanks! Yeah, some of my angles were a bit off and I had to modify with the grinder a bit so I didn't think it was flat enough for wood glue. I thought since the gorilla glue has some expansion to it that would fill the gaps.

[@shannonbryant2259]

One question was yall nervous been on a flat boat with gators in the water they can just slide on the boat?😮

[@JoeOceanside]

@shannonbryant2259 no not really, gators generally avoid us

[@McRVP]

Good stuff. I'm in the process of putting a 10 horsepower on a 18 ft Hobie Cat

[@JoeOceanside]

Nice, I wonder how fast it will move

[@tomvoegele2865]

extend the motor mount boards to the front you could put seats or hand bars on them to hold on it will keep the board from flexing where did you get the board and how much did it cost

[@JoeOceanside]

Yeah I like that idea. The board was around $400 when I bought it

[@BSK2137]

If you could make seats it'd be cool af

[@JoeOceanside]

Yeah l, I like having the deck totally clear though. Maybe some type of fold away seats. Thanks for watching

[@floridaonatankful]

Get it!

[@JoeOceanside]

Yeah we got it 🤣, thanks for watching

[@ahmedalameer6952]

Want to see how it handles a 9.9 or 15hp evinrude or johnson bcuz I just got these two recently when I get them running, I will make the same setup as a compliment to my boat when exploring shallow water.

[@JoeOceanside]

Yeahhhh, it definitely needs a speed upgrade

[@makaad]

I really enjoyed this one. Have a link to the paddle board??

[@JoeOceanside]

No, it's sold out on temu

[@johansomeone1948]

Hmmmm I think i would use a 2 stroke 4 or 5 hp with an inbuilt gastank. 🤔 And maybe a smaller board. However it looks fun af. 😄😂😂😂👍

[@JoeOceanside]

Yeah that's could work

[@robiniancole]

A heavy cooler or duffle bag w gear. May stabilize the bow. Ratchet strap to bungee mounts.

[@JoeOceanside]

Yeah, i could strap the front handles to the pieces of wood and tighten them as kind of suspension cables almost.

[@publicdefender77]

A 15hp Evinrude of the same year is only 16lbs heavier. That would fly

[@JoeOceanside]

Yeah that would be awesome

[@lessardmarc]

I cannot believe you went from 20k subs when you would promote the blu3 nemo to now at nearly 500k.

[@JoeOceanside]

Hey thanks! You must be an o.g. viewer! I'm having a lot of fun with the boat builds, I hope you enjoy the direction the channel is going in

[@geraldhaller9906]

Du kannst den 6 HP Motor auf 8 HP umrüsten die sind im Prinzip baugleich bzw der 6 HP ist ein gedrosselter 8 HP Motor würde dann einen größeren Propeller empfehlen .

[@JoeOceanside]

Yeah, is that just a carburetor upgrade?

[@shannonspear8751]

Milwaukee has entered the chat Things just got expensive

[@JoeOceanside]

LOL, yeah 🤣 they are great tools though

[@jacobforall62]

Very good i love that. Can you please link the board I cant find that big board on temu thanks you

[@JoeOceanside]

I think it's sold out

[@hashiru86]

your dad is really cool

[@phoenixarizona8441]

Is that where you have your 1988 parts lol I was born in 88 you made a mini speed boat

[@JoeOceanside]

Haha, yeah 🤣. Thanks for watching

[@ArtinRu]

long tail boat engine

[@JoeOceanside]

Yeah maybe

[@NeasYellek]

I have a 2001 25 hp mercury 2 stroke that you could give it a shot. Weighs about 120 lbs

[@JoeOceanside]

Nice. Wow I didn't know they were that heavy. That's a big weight increase from the 6. I wonder what the 9.9 weighs?

[@JJP301]

now you should add a seat

[@JoeOceanside]

Yeah maybe, I was trying to keep the deck clear though

[@mademydayyt]

Can we get another hospital hole video again champ?

[@JoeOceanside]

As soon as I can get back there yes

[@Saltlife_305]

Could off put a wood in the middle off the two blues one to push it out alil

[@JoeOceanside]

Yeah I thought of using pvc pipe across the 2 skids that would make a handrail for standing

[@naza-s7n]

No slack.- Xin Jinping

[@JoeOceanside]

Thanks for watching 😅

[@myparadiseonbantayanisland9030]

You could continue the 2x6 or 2x4 top frame around the front and that would prevent the front from ever folding up on you.😁💦

[@JoeOceanside]

Yeah i thought about that, and maybe pre-bend it upwards as it goes towards the front

[@Mario-ep7rr]

put a hayabusa engine in it XD

[@JoeOceanside]

Don't tempt me 🤣

[@newbreedian]

Great build! Can you share a price and link for the board please?

[@JoeOceanside]

I think it's bought the boar for around $400. It's not on Temu anymore but if you search Freein paddleboard I found it on Amazon

[@newbreedian]

@ oh ok great thanks! Yeah I found it

[@myparadiseonbantayanisland9030]

A 20hp weighs about 120 pounds.

[@JoeOceanside]

That is pretty heavy

[@SmellyT0fu]

You have a dust spot on your camera sensor :)

[@JoeOceanside]

Yeah thanks, I didn't see it until I finished the edit

[@raygonda1003]

Where can large inflatable paddleboard be purchased? I searched Temu and no such boat?

[@JoeOceanside]

It's all sold out on Temu, I think it's on Amazon now

[@Tranquiltrawler]

I think having a 20hp would be way to much. Something like a 9.9 or even a 15 would be much more suitable

[@Xambit23]

can you please link the board? I cant find it on Temu

[@JoeOceanside]

Sold out

[@suciooo5498]

Now put some 15hp😆😆😆

[@JoeOceanside]

I think it's will try that 🤣

[@suciooo5498]

@JoeOceanside it would be fun as hell hahahha

[@bb-fe9ur]

6 horse evenrude outboard, almost unkillable. I had one as a boy. I put at least 9000 hours on it...

[@JoeOceanside]

Nice, a little TLC and this one will be as good as new. Thanks for watching

[@stevefrost4325]

Shop vac fill bro. It'll get you almost all the way full.

[@MichaelMassie]

😂😂😂

[@JoeOceanside]

Thanks!

[@simonsalazar2927]

Motorbored

[@JoeOceanside]

Yup, could be a whole new industry

[@jonahsmith-i4x]

How did you transport the board to different places?

[@JoeOceanside]

Deflated it and rolled it up, the engine mount i put on the roof rack of my suv

[@jonahsmith-i4x]

@@JoeOceanside Oh cheers mate, i've been thinking of doing something like this for fishing in the local river would you say it is worth it?

[@colehansen178]

Hey buddy. What camera were you using on n the pole?

[@JoeOceanside]

Insta360 X4

[@myparadiseonbantayanisland9030]

Price???

[@JoeOceanside]

Around $400 when I bought it

[@isaacBhall]

Link? Biggest i can find are 12ft

[@JoeOceanside]

I think it's sold out