John Deere 54" Hydraulic Blade for 300 Series Tractors

In this video I discuss the 54" hydraulic blade that John Deere made for many years that fit the 300 series tractors as well as the earlier 120/140 models. This blade will even fit the later 400 series and X series tractors with the proper adapter. I then mount it to my 318 and demo the functions. Thanks for watching!

[@johnpyle8027]

Love the early 3 series! I spent summers as a landscaper at an amusement park mowing on a early to mid 80s (new at the time) 318. 2 years ago I bought a 1984 430 Diesel and restored it from the frame up back to original with every option. I would never do it again, but if I find the right tractor I will buy it and part it out! These parts are like gold! You didn't show the other side of the blade. There is a pin on the right side lift cylinder bracket that can go in one of two holes. I believe if you put it in the front hole the blade will still lift and float automatically without pushing the lift lever past it's sticking point which is very handy. My 430 will lift the mower and push with the diff locked. I I don't know how well the smaller ones with an open differential with the tractor lifted. Those plows will fit the 322 400 and the 430, the 430 requires a front end extension bracket. Love the content!

[@rentcda]

Exactly what I needed!

[@outdoorpowerhouse]

Glad it helped!

[@RealCTGYT]

We bought one of these 300’s and it came with the blade but we also want the front end loader any idea on what the easiest way to get more attachments?

[@jeffclark5024]

Noticing the bracket on the front of the up down cylinder is in a different position than mine was in when I got it. Do you happen to know what the purpose of that is?

[@joshuagrant6030]

Two questions 1. I have a 317. I saw a blade that looks the same for sale that was on a 420. Should fit mine right? 2. Could this be made into a small loader? I think the challenge would to change the hydraulic cylinder for left/right into tilting up.

[@michaelhauser603]

I desperately need a video about the slop in the pivot bolt and some of the other bolts that hold the hydraulic pistons to the mount on the plow.

[@outdoorpowerhouse]

I think a lot of that is the result of decades of use so some of the holes become worn. You’d have to take it apart to see where the wear is but some solutions could be larger bolts, sleeves, etc…

[@michaelhauser603]

@@outdoorpowerhouse awesome thank you for the quick response. This is my first 318 and I got it from a lady who was selling the blower and plow all together. I have used the blower but haven't used the plow yet. I've been doing a lot of reading on forums and the answers are all over the place. Someone posted they have 3 of these same plows and they all have slop so hopefully it's fine or not too bad. Definitely hoping it doesn't have any egg shaped holes. Thanks again for the response! 👍

[@outdoorpowerhouse]

Yeah mine has a little as well.

[@michaelhauser603]

@@outdoorpowerhouse okay good to know 👍

[@johnstratton5637]

do you mow the grass with having the plow n deck on at the same time the plow on the tractor too

[@outdoorpowerhouse]

I do not.

[@spumonimick7152]

I was told this plow could fit on a 1 series to. I have a 1025r so I bought this plow used. What kind of bracket do I need to mount this plow?

[@outdoorpowerhouse]

I know of no ready made bracket to fit this blade on a 1025R. As far as I know it would be custom.

[@timnethken4406]

How do you bleed or presurize the hydraulic for maintenance?

[@outdoorpowerhouse]

I’m not sure what you’re asking exactly, what situation do you need to do that? When I install the blade, I never have to do anything other than hook it up. Operation will work any air out of the lines.

[@airsearch1]

What is the model number for that blade? I am wanting to get a blade like that for my 1982 317.

[@outdoorpowerhouse]

It’s a model 54 blade.

[@user-ox6mi4dt5k]

what adapter do you use to make a 54" 300 series snow blade fit a 425

[@outdoorpowerhouse]

There used to be something made years ago called a frame squeezer, but to my knowledge they’re no longer made.

[@chrisbrewer5789]

Just curious do you have the rear cylinder lockout installed

[@outdoorpowerhouse]

I do now, but didn’t when be this video was made. You can check out the install here: kzbin.info/www/bejne/haWph2NqjpVraac

[@chrisbrewer5789]

@@outdoorpowerhouse cool thanks man have yourself a great day I'll be tuning in more often

[@outdoorpowerhouse]

@@chrisbrewer5789 thanks, same to you!

[@ronreeder1242]

Are both front hydraulic cylinders the same ?

[@outdoorpowerhouse]

Yes I believe they are the same part AM31362

[@dombasile3914]

Do you have to disconnect mower deck at all?

[@outdoorpowerhouse]

No, the deck can be attached.

[@robthomas372]

Do you know where I can find the springs?

[@outdoorpowerhouse]

I think the part number is JDS2827M, but double check.