JOHNSON 3O HP, Something's Wrong

[@theluckystrike6371]

Just catching up bud that’s a very cool Merc can… great video as always thanks again.!!! 🙂 👍🏻👍🏻

[@jasper60103]

Great video. I like how you troubleshoot the motor and address the real problem(s). That’s a lost art. Thanks for sharing.

[@kodibassInsideoutboards]

Thanks mate, U R most welcome. kb

[@samtate1260]

There’s a little trigger under the top you almost take your finger on it it’s underneath the top you’ll see it push it back and put some oil in it push it back thanks again for your videos

[@merc1758]

Another great video Kodi. 👍

[@kodibassInsideoutboards]

Thank U, 4 sure kb

[@chriseisele9969]

Your the man btw it looked like a release tab under the main bar on mercury gastank Chris from OHIO

[@kodibassInsideoutboards]

Yep' thanks I kinda get how it works now. thanks kb

[@craigstevens9734]

That boat shaped tank would be good in front of canoe . Good stuff kodi

[@kodibassInsideoutboards]

Yes it would, I just think it looks Kool haha kb

[@dwayneivie3350]

You a Merc dual line tank , when the center arm come up there is a big "O" ring that provent leaking full made in early 50's..love you videos.

[@kodibassInsideoutboards]

Thank you' Yep I think I almost got it to open now just going slow don't want to break anything, kb

[@THISOLDOUTBOARD1]

My Man Mr KB. ! Hahahaa. Hardest Working Marine Mechanic on Utube! That thing looks like it was rode hard, rode hard again, and never put away! Haha. I hear we seem to be working on the same issues lately. 30 horse bad gasket, I even bent a wrench for those stud bolts! Too funny. So whats the plan these days. Comin back to Florida any time soon? Give me a holler, its been awhile.

[@kodibassInsideoutboards]

Great to hear from ya' Bro. Hope'n to get to Sunny Florida this com'n winter now that covid is kinda going away That's my plan anayway. ( & here comes Monkey poc's ). I'll give ya call here soon & get caught up.

[@ricksnowden8408]

Thought that motor shook too much

[@kodibassInsideoutboards]

U R spot on mate. kb

[@OutBoardTink62]

@@kodibassInsideoutboards That happened to a friend of mine who sold a similar motor after a month or so the powerhead came loose. Lack of torquing the powerhead bolts was the problem.Sometimes the calibrated arm backfires on you,LOLL! when you tighten the bolts by hand. A slightly bent prop sometimes wreaks havoc too with vibration over time also to shake rattle and roll the heck out of a high RPM normally run machine.Usually without a complaint from the operator thinking there is no problem ....

[@billrae4198]

I agree Somting Wong Somting very Wong

[@kodibassInsideoutboards]

Yep U R spot on mate. kb

[@fleetwin1]

Yeah, first for me also, especially on a salt water motor. Betting someone was in there before and never torqued them properly.

[@OutBoardTink62]

That looks like a converted pressure tank to single line newer style fuel pump Mercury motor .There is a pin under the far side handle from the line outlets to release the handle to open. One Rare tank

[@kodibassInsideoutboards]

Thanks for the info mate. kb

[@bassneckfishing2505]

I have a problem I have a 93 mercury 75 hp the pressure relief valve on the trim is broke and I can’t get all the plastic out how can I get it out

[@kodibassInsideoutboards]

A very small sharp flat screw driver and pick it out. kb

[@bassneckfishing2505]

Thank you so much brother

[@ricksnowden8408]

Gasket blown out?

[@kodibassInsideoutboards]

Yep on the exhaust side, water side seems fine tho. kb

[@TimsWorkshopTJY]

Off with its head I say. ha-ha, as soon as you started it, I could tell the head bolts nuts whatever were loose and especially when it was smoking like a barbeque going

[@kodibassInsideoutboards]

Yep' see it all in this little shop 4 sure. kb

[@samtate1260]

On evinrude Johnson The pressure tanks have eight screws on top and they sell all the seals and stuff inside for it online

[@kodibassInsideoutboards]

I have 2 of those, one is dented up pretty good but works fine. kb

[@alltimemusicmovies8889]

Hey do you know what the measurement is on a 1977 140 Evinrude Shiftrod is?

[@kodibassInsideoutboards]

I will get you that info give me a day or so. kb

[@alltimemusicmovies8889]

Thank you

[@curtiscoombs8197]

Hey!!! I have a 1987 evinrude outboard motor. Would you be willing to help me know what is wrong with it?

[@kodibassInsideoutboards]

I will sure try. kb

[@locknload9143]

All that exaust doesn't help either going thru the carb possibly.

[@kodibassInsideoutboards]

U R correct when I put the hood on it will die. kb

[@buddybaumann528]

looks like it lifts to release the hose loops

[@KA7ISVtube]

Is there a small pin under the handle that you pull back to release the handle?

[@kodibassInsideoutboards]

Yes it has been replaced with a screw tho. kb