I figured dead cat was named for looking like a dead cat, but I would have never thought it was from someone actually turning their dead cat into a quad 😂
@SanneBerkhuizen7 ай бұрын
I learned something today... Something I might didn't want to know.
@LowetheTechGuy7 ай бұрын
It seems like such a minute event with all the craziness we have going on these days.
@ЕленаСереж7 ай бұрын
I've seen this video, but assumed it wasn't real cat turned into the drone
@MCsCreations7 ай бұрын
Hey guys, how the heck do I unsee it? 😂
@kingkieck7 ай бұрын
I saw that video before getting into the hobby and as soon as I heard about a DC frame I knew instantly what it referred to. I literally laughed out loud about it.
@mikes17967 ай бұрын
I've built this frame and love it. I do have one major complaint. The 03 Air Unit armory part that JB talks about is NOT available! The website says it's part of Upgrade Kit B. You can't buy that. It's not even part of the 3D printable download files. I contacted Speedybee about this and their reply was "Sorry to say our upgrade B kit has not yet been released and will be released soon on the official website. We are very sorry for any misunderstandings". It's easy to "misunderstand", when you can't even get the product that they're showing and advertising.
@TimothyStewart-qy8sz6 ай бұрын
I’m sorry I didn’t rrr
@dysisinfluence6 ай бұрын
Hey, Did you get it yet? I want to order it also.
@mikes17966 ай бұрын
@@dysisinfluence They now have the Upgrade Kit B available for the frame. Since I already had the frame, I was able to order just the Kit B. I haven't received it yet. I do like the frame.
@velocistafpv7 ай бұрын
Ah. Now I know why they call it deadcat. You learn new things and more from JB! 🤣🤣🤣
@MCsCreations7 ай бұрын
Joshua, the joint between the arms is really strong. In woodworking we call it "half lap".
@st33ldi9ital7 ай бұрын
Joint may be strong but still compromising the strength of the arm... especially with lateral leverage towards that half cut...
@MCsCreations7 ай бұрын
@@st33ldi9ital I've seen people testing it to see when they break... It would surprise you!
@Todd_G_FPV7 ай бұрын
Not really, it has two carbon plates sandwiched over them which will help keep them bending sideways and the other shims as he calls them locks them in too. I think ifs pretty well thought out personally but i see why u would think that the smaller slab would break off being half the thickness @st33ldi9ital
@Ali-sYTАй бұрын
NOPE, I broke two arms and at same place.
@ThaSlothFPV7 ай бұрын
Pretty damn cool! I asked about those frames on one of your Q&A’s but I damn glad you made this review! Most of reviews out there are about the DC version only, and I wanted to see that XH version! I am getting that frame as my first 5inch quad build! Looks sick, damn good price and seems durable! Time will tell! Thank you for the content! 👌🏻🙏🏻
@thechillingdrone7 ай бұрын
I've been flying this thing for a week and I can tell this is one of the most amazing frames u can get on a budget
@MessingWithCode9 күн бұрын
Finally Building MIne , i am so happy , even thoght is only the frame so far , i am still really happy!!!
@daliag_4397 ай бұрын
Its a-me A-speedybee
@ArchonLicht7 ай бұрын
ROFL
@Seanflipz3 ай бұрын
Hi bud, love your vids. I started 8 months ago with the Dji Fpv. Now Im flying Speedy Bee M5 V2. My skills are skyrocketing! You're my gotoo guy for help and inspiration. Great content! 👌
@FPV-Drones7 ай бұрын
Already crashed it a few times a no problem! This frame is a bit heavier than others, but looks strong too. Good for everyday flying.
@revodrvr7 ай бұрын
Speedybee really stepping it up this past year.
@davejackson83033 ай бұрын
Like so many of your videos… awesome just finished building my second Mario. Your video really made it easier along with keeping me entertained. - Thank you!
@Webuildstuff7207 ай бұрын
Just got mine in the mail today. Perfect timing.
@GhostRyderFPV7 ай бұрын
I've had mine for a week, along with the SB stack and VTx I ordered at the same time. Go SpeedyBee shipping! But motors and camera are on a much, much slower boat apparently, so I'll just keep flipping the hourglass over until they get here.
@jonah64967 ай бұрын
The thing about the Speedybee Mario frame is that it requires you to flash the Mario theme song to your ESCs. Loved the review! What a price, I'll be looking at the Mario next time I need a frame.
@MrBlueSky21127 ай бұрын
My Mario5 DC came in the mail a couple of days ago. Got the 3D prints too. Getting ready to start the build with a Vista and Speedybee F7V3 stack. This frame build video will help. Thanks!
@ChrisQuadFPV7 ай бұрын
Speedybee is killing it. 😎
@davidcane72117 ай бұрын
I've bought this frame as my first build. So far I have the frame assembled, which was really straight forward. Once my soldering is up to scratch I'll finish the build.
@wearemany737 ай бұрын
RIP 🪦 dead cat 🐈 Ohh I like that arm design 🧐
@DMARZFPV7 ай бұрын
Built it and the Mario 5 XH rocks bruh..... Love it. and the price... awesome. all tpu free available.
@Maxim_Nub7 ай бұрын
was really interested to hear about vibration resistance of this frame, i wish you will do some build on it in the future to do this testing and what you like and dont like about it frame after using it. but about binding the rx, literally done it just once on each of my drones :D so i think its pretty cool that they thought about some cover for the rx and the capacitor too
@mepanza7 ай бұрын
I have one ready and fly very well!!!
@Girtthquake7 ай бұрын
It's rare that I disagree with you, but I gotta say that I'm super happy flying a 20x20 stack on my 5". I'm running a 75a ESC, so it can definitely handle the abuse. I've had this set up on my apex for over a year with no issues.
@dwimulyadisam17 ай бұрын
best design .. always lot of improvement products and prices too .. go speedybee go
@smooth_ops29426 ай бұрын
My first quad was a TBS Vendetta, which even by todays standards way ahead of its time. Still look at it all the time and just think Wow!!, Trappy was wild for doing this in 2015-2016.
@ChainsawFPV7 ай бұрын
"There is no reason to put a 20x20 on a 5 inch frame" Thank you!!! I could never understand the point of putting a small one in, when there is all that room.
@Dorff_Meister7 ай бұрын
Nice review, Thanks! It looks great. My daily flyer is a build in a SpeedyBee Bee35Pro frame, which is another awesome SB frame. If I find myself in the market for a 5" frame, I'll def. consider it. I'm having a lot of fun in the 3.5" range and am working on my indoor 65mm game, too.
@DigitalCruzer7 ай бұрын
I really like this frame except for one issue and its a major one for me... every single frame I've had that uses the standoffs instead of steel press nuts to clamp down on the arms (cough cough) end up ripping the threads out of the aluminum standoffs because the arms work like levers and the aluminum doesn't stand a chance. I've never had that happen with steel press nuts! So I'm glad i watched this assembly video cuz i want to build a my first deadcat 5 inch for my moonlight and seeing that has made me decide this isn't the frame for me!
@KidCe.6 ай бұрын
im also searching for a frame for the moonlight. You dont want to use it foor moonlight, is it just because of the aluminum standoffs? coulndt you just source some steel standoffs somehere else?
@MrVlodato4 ай бұрын
Using M2 20x20 stacks on 5in is useful for people who also run a 2/3/4 inch with a 20x20 stack. It allows you to swap parts between multiple quads in a pinch.
@simplegr33n4207 ай бұрын
Why is this frame $40 when the speedybee master 5 v2 is $73? Any reason to buy one over the other?
@johnsmithe46567 ай бұрын
That flying dead cat..... wow. I mean, taxidermy in general is crazy, never would have thought of mounting some on a drone. Now how about a ferocious bear head? I want to scare the bejeezus out of the children pls.
@1337flite7 ай бұрын
If people think an SMA connector causes loss, they should try sitting their end of their antenna's pigtail next to a munged no longer servicalbe, exceeded it's 60 or whatever the lifetime number of connections is for a UFL connector. Battery mounting is an area where some innovation could really be nice. Like - get this - you have a couple of terminals on the quad and some terminals on the battery and they mate together!!!! Maybe a positive rail and a necative rail on both that just mates up. Having vulnerable cables with somewhat vulnetable XT60s that get in the way soemwhat no matter you you route them sucks. Chris leroux's XT60 saver on the original Chameleon was a better soluton but the batery still had a floppy vulnetable cable. Like it should not be an insurmountable problem, and it should be something the industry should be able to sort out with one or two standards. Then again I'm the guy who liked the PoPo props/motors, so what do I know. I guess I'm just uber lazy compared to other pilots.
@MCsCreations7 ай бұрын
Fantastic review, Joshua! Thanks! 😃 That frame has my name! No, I mean literally: MC comes from Mario Cesar! 😂 Anyway, stay safe there with your family! 🖖😊
@alexanderklenk21957 ай бұрын
I assume JB just misread the website or something but it's even cheaper. $34 for just the frame and $40 if you buy the frame with the upgrade kit in one package.
@modquad187 ай бұрын
Hmmm, dead cat’s arms looked X config to me. Maybe he came up with the frame idea after a few crashes 🤔
@sadboybushido7 ай бұрын
Quite a few ideas have been taken from the FlyFish Violator frame. Like the receiver cavity being the biggest most obvious one. But however smart the arm mounting may seem, they are not symmetrical, and just changing arms will be the biggest ass pains in the universe.
@powersv27 ай бұрын
Is that for capacitor or receiver.
@JoshuaBardwell7 ай бұрын
The arms are symmetrical.
@sadboybushido7 ай бұрын
@@JoshuaBardwell so how about swapping arms? How difficult is that?
@Mau_DelS7 ай бұрын
i'm the only one shocked about the dead cat story?! I really learned something new today...ahahaha
@ArchonLicht7 ай бұрын
Oh, I remember that dutch taxidermy-FPV enthusiast and his flying dead cat. But - from looking at the footage it's pretty clear he actually used an X frame for that quad. I guess the deadcat frame does actually look like a dead cat. Perhaps the taxidermy drone has given people the direction for the naming though.
@MJColeofficial7 ай бұрын
This is comedy gold 😂
@GaweNowakowski7 ай бұрын
I think about buying this frame as upgrade for my old tired mark 4 framed 5". I would love to see vibrational performence of this frame especially x version. It really only lacks 30x30 at the back.
@IVAN_ENT7 ай бұрын
Lol I remember seeing that taxidermy quad well before I ever got into fpv wonder is he in the community
@KrazyCase_FPV7 ай бұрын
im glad im not the only one having trouble with those damn shims but they are a nice place to hide the cap
@davidcane72117 ай бұрын
Mine only slotted into their final position when I tightened the screws and clamped it in place with the bottom plates. Up till then, it was stubborn as hell.
@cmosdaboss7 ай бұрын
Its actually now 33.99 for the frame true x or DC and $40 with 3d printed parts. Price cannot be beat for that
@Silor7 ай бұрын
I'ver had a frame with the same interlocking arm system, with the butt half milled off. The arms liked to delaminate along the layer line of the carbon sheet where the milling stopped.
@senditsamfpv7 ай бұрын
I would have really liked to see how much props were in view on the true x
@miguelt.79976 ай бұрын
Do you even use the Sovol printer anymore? Bambu labs is the DJI of the 3D printer world!
@serhiizabobonin10167 ай бұрын
I have bought one. I like it.
@FlyZoneFpv7 ай бұрын
Awesome review JB 👊🏻🫶Thanks brother
@Ac_vrdr7 ай бұрын
Could you make a video on the jumperrc t14 ?
@fnkycoldmedina7 ай бұрын
josh , can a original dji air unit and camera fit in this frame? i been asking everywhere i can with no luck .
@fnkycoldmedina6 ай бұрын
i will answer my own question here for those who are wondering . the short answer is "no" the og air unit will not fit . speedybee actually sent me pictures of a og air unit in the rear of this frame and it does not fit . then they offered me a refund since my frame had not shipped yet . good on them . i went with a geprc mark4 hd5 dji frame which is made for the original air unit and includes tpu mount for it .
@NaorFPV7 ай бұрын
its 40$ with the tpu and 34$ the lite version. a bit tricky to align the small carbon parts in the middle, but i love it.
@MikeBanger7 ай бұрын
We can all agree that the frame review here took the back seat. Dead cat!?
@tesimpamonami91885 ай бұрын
Hi Joshua, can you please give me some tips on what to purchases to be able to upgrade or my fix my whoop drones. I will really appreciate. Thanks
@TAGE_FPV7 ай бұрын
Having owned and flown SpeedyBees previous frames I can attest to the fact that the half notch cut for the arms to make them jig together is a terrible idea for durability. In almost all cases this is where stress fractures show up and the arms delaminate after crashes. would not recommend. Just use normal methods to make things pressure fit without compromising the integrity of the frames.
@fpvDRE7 ай бұрын
cool looking frame that brudda 👍
@unRealityFPV7 ай бұрын
Wait, you didn’t fly it?!
@forkbombfpv7 ай бұрын
in terms of the receiver slot. its not like you're going to need to bind it all that often.
@73FPV7 ай бұрын
your the best.. Thanks JB
@antiricergt7 ай бұрын
I got a DJI mini 4 pro for Christmas. My son now wants ones and needs something that will hold up. I want to build him one of these with the FPV. Can someone tell me what’s a good kit that comes with everything that will stand up to abuse. I want to be able to use to goggles. Been watching alot of Ken heron videos. Something like the drone he uses to go in buildings and stuff like that would be perfect. I’ve seen him crash it pretty hard Thanks for the help.
@macualey7 ай бұрын
I expected it to be at least double the price!
@661FPV7 ай бұрын
Same as BQE Ripsqueak arms
@parkswreckfpv35477 ай бұрын
33.99 for the lite version, 39.99 for the advanced version (looks like this version includes the upgrade kit). So its actually 40 bucks for the full frame :) EDIT: Looks like there is a Pro version coming soon that includes the upgrade kit B which is the Armour/LED upgrade. That will probably be the $50 version
@aarondodson12617 ай бұрын
Just bought one
@rainbowrunner11367 ай бұрын
Speedybee has been the only reason for my salary to get over in a week. After speedybee bee35 pro, now its this :( btw Joshua, what do you suggest on frame ? Should I sell my sell my geprc mark5 o3 squashed x frame and buy mario or keep the mark5 ? Which is the better frame ?
@w4smtАй бұрын
Hi Joshua. Do you have any idea what brand/color TPU filament matches the SpeedyBee yellow? I've ordered 2 spools of yellows and neither match.
@JoshuaBardwellАй бұрын
No sorry I have no idea :-(
@ianwalton2847 ай бұрын
Hopefully they will start selling replacement arms... before I break one. That would suck to have to buy a whole frame to get one replacement arm.
@steviefpv7 ай бұрын
I always but 2 frames at a time then you got every single spare you may need and will need
@whatsthematter87677 ай бұрын
Quadcopter Carcinization, this is it... Quadcopters are canonically living beings.
@Binkoro7 ай бұрын
Since I want to install a GPS, it looks like I will have to have the XT60 come through the front. However, I don't want to install the FC/ESC facing backwards since it affect the length of all my other cables from the FC to peripherals. If I mount the FC/ESC stack facing forward, is there enough room between the stack to pull a long XT60 pigtail through to the front?
@kingkieck7 ай бұрын
Samsung Galaxy removed the damn headphone jack! But I like this frame, might be my next one.
@jayaneyon93167 ай бұрын
Why are you talking about binding like you don't use elrs lol? And most of us do too.
@powerstroke017 ай бұрын
I was thinking the same. 😂
@kermitFPV5 ай бұрын
Anyone know if the fancy pro side cover bits play nice with the dimentions of the walksnail moonlight?
@user-otzlixrАй бұрын
I’m curious if anyone ever successfully kept these swinging doors , swinging after the esc/motor attachment. I’m no pro, but my initial build I tried very hard to keep the swinging doors swinging, but I think I failed. So I remove 4 more screws :) I’m on a 2nd build I’m wondering if it’s worth the effort.
@exiledfpv7 ай бұрын
May 1000 curses be upon your head, Bardwell!!!! 1. Had vowed not to spend any more on FPV stuff....for a while. 2. Not confident enough in my soldering skills so I had vowed to buy only BNF/RTF. Well.....I've just ordered this frame (went with the X....I'm a flier not a filmer). Guess I'll be building!!! P.S. (only kidding about the curses!!!)
@pippifpv7 ай бұрын
Hey Joshua!!! What is the weight of this thing? It seems you kind of overlooked, to me, one of the most important info about this product!!! The weight.
@JoshuaBardwell7 ай бұрын
My brother in Christ there is literally a chapter marker titled "weight".
@pippifpv7 ай бұрын
You are the man, Joshua. Love you 😍 Sorry if i ruined your day
@cwarnock79677 ай бұрын
Thanks JB. I’ve been anxiously waiting for some reviews of this frame since I’m a budget guy and can’t justify a fully decked out Supafly frame. I figured it was going to be a bust, but it looks like a steal for the price. I think it’s actually less expensive than you quote. $40 for a frame with prints! You can literally buy 2,3, or even 4 of these frames for the cost of other frames on the market, so durability can even itself out with cost if that’s what ends up coming from the design.
@Nullscr1pt7 ай бұрын
looks like some thin spots on that carbon... but maybe it doesn't truely matter?
@John_Doe_69967 ай бұрын
Hard to say, my frame is very skeletal, but so far has been very durable.
@robertamberwich13687 ай бұрын
Nothing new, I've had Air intakes on my drones since 2020. But must admit this is a good idea
@Flying_machines7 ай бұрын
Can i use 20mm 35amp stack on 6inch drone????
@frnkguard17 ай бұрын
What I want is 4k vtx reception and transmission
@kellywasden7 ай бұрын
Who pushes the bind button these days with receivers?
@itsgoofy31897 ай бұрын
Ineed help I just got the jumper t light v2 and I need help flashing it I open the configurator and set the release as 3.3.2 device category should be jumper 2.4GHz and the device should have 2400 tx but the only options are stuff that says 2.4GHz please I need help I might quit I don't want to I want to fly whoops
@JinKee7 ай бұрын
You can now play as Luigi
@X862go2 ай бұрын
cool
@AtradiesInc7 ай бұрын
There is a Tanq V2
@tiefflieger97127 ай бұрын
Can you change the DC arms with the X arms?
@JoshuaBardwell7 ай бұрын
Yes.
@kamilgheraba42147 ай бұрын
I wish to see Mario 8" foldable
@lemafpvlaf17587 ай бұрын
I will arrange to put it on the shelves
@divingfalconfpv46027 ай бұрын
Shouldn't vents be on the VTx?
@artisticyeti227 ай бұрын
Actually some people triple stack,maybe this is ideal for triple stack instead of a stack and vtx in the back. Not sure though
@hozrhayt7 ай бұрын
Two things...why all the love for the bind button? I hate them. I only use cli commands to bind. I carry a tablet with a configurator for field rebinds. Second... Apple removed that jack because they are morons and trying to force feed air pods to us, not for any good reason. And it has bitten them ever since.
@Binkoro7 ай бұрын
I wonder why the GPS mount has holes for dual antennas only. I wish they had a GPS mount for a single antenna.
@aarondodson12617 ай бұрын
For the 03
@Binkoro7 ай бұрын
@@aarondodson1261 But my O3 only has one antenna.
@eelcowisse7 ай бұрын
@o I suppose it can be used for Walksnail Avatar HD Pro Kit or the Walksnail Moonlight kit. Both have two antennes. What I am wondering though, where can I find that part for two antenna's? It is not in the mario 5 set I received yesterday and I want to mount the moonlight kit on it with two antennas. Missing that 3d printed part though......
@Binkoro7 ай бұрын
@@eelcowisse it’s I. The open source file. You have have to 3D print it yourself. I don’t think the GPS module or the dual SMA with the XT60 are n the kit.
@eelcowisse7 ай бұрын
@@Binkorothanks! Found it! Now all I need is a 3D printer 🙂
@TorontoFPV7 ай бұрын
Build my frame :)
@stst83017 ай бұрын
Finally a good frame without patent pendings...................
@tweekFPV7 ай бұрын
👍🏻👍🏻
@cutterhead137 ай бұрын
Shame i cant find this frame in 7inch
@squnxfisher98317 ай бұрын
20mm stacks on 5-6" frames is pretty normal on racing frames these days
@prOkrEAt7 ай бұрын
I just got the chriss rosser recommended stack on a new 5" I'm building and got to say it fits so nicely. Will probably never go back to 30s... Which I do have on its 6" version of the frame. But main reason was to get the AM32 ESC vs blheli32. Both are f7 FC. Both O3 video. Also put rossers motors on the 5".
@aarondodson12617 ай бұрын
Only 30 millameter stacks here lol
@unRealityFPV7 ай бұрын
a review?! must be big!
@denniskompany55247 ай бұрын
How much they payed you to change the opinion. This one is completely opposite to the previous review
@JoshuaBardwell7 ай бұрын
I have never reviewed this frame before. Are you confusing this frame with the Speedybee Master? I still don't like that frame. They are different frames.
@flaparoundfpv86327 ай бұрын
You're shittn' me. 50 bucks??
@smokyFPV7 ай бұрын
20:05 The Air Intake part you came for
@francisvalcbАй бұрын
If you measured all the screws, it would really help people who come to see the video and speak another language. :(
@Ali-sYTАй бұрын
I have speedybee Mario DC, Yes I broke Two arms at the same place front arms, the place sandwiched together. NOT good frame, not recommended.