Its a really nice plane and it flies so well. Thank you for all the time you took to make this plane as it was really incredibly helpful for me.
@sebbissland72734 жыл бұрын
Thanks, man! I had to watch this video for a school project but it was really interesting so I watched all your vids! they're awesome! Keep it up!
@Joyplanes4 жыл бұрын
Thank you!
@sebbissland72734 жыл бұрын
@@Joyplanes Cheers
@ansarahmed46314 жыл бұрын
Great tutorial, I appreciate and love your way of explaining and your patience for making the glider smooth.
@FuadPhenomenon10 ай бұрын
Hitting a massive like for that amazing airfoil design!
@deeparameshkumar8046 ай бұрын
Hi faud i like your channel and that foam board glider
@eleanorgordon2612 жыл бұрын
love how simple and easy the design is. It flies so well.🕊🐦🐦🐦
@axelsmith209 Жыл бұрын
I actually made this glider and it took a little while but it was so fun to make and I even added some ultralight servos on the flaps to make it Remote controllable!
@axelsmith209 Жыл бұрын
No Way
@axelsmith209 Жыл бұрын
I Watch all of your vids and I can’t believe that you hearted my comment! 😁
@axelsmith209 Жыл бұрын
Again thank you so much for posting this step by step, it really helped!
@donnieeudy72934 жыл бұрын
I all ways enjoy your videos I watch all of them Thank you very much keep up the good work.
@NighthawkGliders4 жыл бұрын
Joyplanes- Enjoying flight and enjoying life! Well done! 👍😀
@Joyplanes4 жыл бұрын
Yes! Thank you!
@daviddavids28842 жыл бұрын
if we assume that the cg was correctly located, then the video of the flights indicates that model never had a correct amount of nose-up trim, at the horiz-stab.
@leobluesy Жыл бұрын
Always great fun.
@paulschmolke1889 ай бұрын
Nice job!
@SAMax22684 жыл бұрын
Great video. The trimming of the wings can always be improved, but still good nonetheless 👍
@daviddavids28842 жыл бұрын
6:23 this nose is over-long: its length Should be Reduced by about 45 percent.
@devanshplayzminecraft253810 ай бұрын
Hi, can I make with only 1.5 mm thick balsa wood?
@daviddavids28842 жыл бұрын
6:17 !!!!!!! the grain in the vert-stab should be VERTICAL. !!!!!!!!!
@stalin2000003 жыл бұрын
plan shows negative attack angle of the wing
@gamalmostafa5681 Жыл бұрын
are all lengths in the pdf in mm like the wing is it 170 mm or Iam wrong
@mohmidooo6 ай бұрын
Can we get the design plans?
@vihaanarora86472 жыл бұрын
Just asking, but wouldn't the glider fly better if the wings folded down and you give a little less thrust? as the down wings will provide stable lift allowing long glide range and speed at the same time
@prathameshkalaskar92504 жыл бұрын
I am also working on this project! Will upload video very soon!!!! Btw I just love to watch videos from joyplanes RC❤️
@Joyplanes4 жыл бұрын
Thank you, I want to see your video.
@prathameshkalaskar92504 жыл бұрын
@@Joyplanes of course, will upload it very soon!
@prathameshkalaskar92504 жыл бұрын
@@Joyplanes kzbin.info/www/bejne/gWewpJmQidiZmMU Not that much informative as your videos are!
@azmibadri80832 жыл бұрын
Link aeroplane pliss
@anup8573 жыл бұрын
Can I use only 3mm balsa sheet and sand it to make it thin for other parts🤔
@j.elders28803 жыл бұрын
Yes, make sure its sanded symmetrically and it should work.
@antoniorodriguez-cv8kj4 жыл бұрын
I really liked this video thanks you. What do you use for weights clay ?
@ayushkaiwart24513 жыл бұрын
It was a good glider to make.
@manasagarwal69244 жыл бұрын
Wow another beautiful plane and a great video! I'm really curious how big can you realistically make a balsa wood hand launched glider? Future video idea maybe? 😉😉
@Joyplanes4 жыл бұрын
Some people have done big ones in another channel. But for big airplanes I prefer to use the classic built metoth.
@joshuawfinn4 жыл бұрын
In the US we build them up to 1m span for contest flying. Tailbooms have to be made from carbon to handle the launch stresses because we discus launch them. The pros get close to 2 minutes in calm air.
@manasagarwal69244 жыл бұрын
@@joshuawfinn Wow. Just saw your channel and you have some amazing stuff there. Specially the super slow flyers! Glad I randomly found your channel. Subscribed!
@joshuawfinn4 жыл бұрын
@@manasagarwal6924 welcome to my crazy world :)
@bangabil7351 Жыл бұрын
I'm from Indonesia I have a lot of balsa wood
@manuelferreira44804 жыл бұрын
I think it lacks angle of incidence.
@Joyplanes4 жыл бұрын
I'll make another one and test that.
@manuelferreira44804 жыл бұрын
@@Joyplanes Es un aeromodelo muy bonito.
@wdtaut56503 жыл бұрын
This was designed for indoor flying. Indoor gliders don't need as much built-in stability as outdoor flyers. For outdoor use, build one, see how it performs and adjust as needed. At 7:01, you can see he is adding 'up' elevator. Too much 'up' elevator and the plane will loop at the launch. It's a tightrope between enough incidence for recovery and too much so it loops.
@pranitjadhav95643 жыл бұрын
thats amazing
@eleazarguzmanrn69453 жыл бұрын
Quick question: Doesn’t the application warp the wood?
@Joyplanes3 жыл бұрын
No.
@ΜιχάληςΚαραστεφανής4 жыл бұрын
I have a question.can I use 2mm balsa and then sand down the stabilizers so they have an airfoil too???
@Joyplanes4 жыл бұрын
Yes, but stabilizer don't need to generate lift, a simetric airfoil is recommend.
@ΜιχάληςΚαραστεφανής4 жыл бұрын
@@Joyplanes okay thanks
@flightdog18074 жыл бұрын
nice plane
@Joyplanes3 жыл бұрын
It sure is!
@ayahussam8223 жыл бұрын
The link doesn’t work
@Joyplanes3 жыл бұрын
Fixed!
@wdtaut56503 жыл бұрын
Go to outerzone.co.uk Enter world's record glider in the 'Search plans' box.
@sanidhyasharma38823 жыл бұрын
Which app you used to make wings design in pc
@newskyflyersbhopal9163 жыл бұрын
Very nice
@Joyplanes3 жыл бұрын
Thanks
@陳天右4 жыл бұрын
How thickness of the woods
@davidstuchly97923 жыл бұрын
How do we make styrofoam glider?
@Iku3510 ай бұрын
nice work next time make a lift to real mars alon musk will pay u 100 tusla
@jimthompson32474 жыл бұрын
Thanks, new subscriber from Atlanta, GA. I need to purchase an imperial ruler. :)
@Psychafn3 жыл бұрын
Best plane
@olafheidtke78584 жыл бұрын
cool
@poonam82774 жыл бұрын
Can I make this with foam board
@Joyplanes4 жыл бұрын
Probably but it is a bit different process.
@Jafaarmazin4 жыл бұрын
Hi brother, I am Mazen from Iraq. Can you send me the measurements of this plane or a map?
@wdtaut56503 жыл бұрын
Go to outerzone.co.uk Enter world's record glider in the 'Search plans' box.
@НиколайБотев-у9д4 жыл бұрын
Exelent
@clsgaming38593 жыл бұрын
fly very will
@smusiness1654 жыл бұрын
The Wing Is probably too small
@buangstriapemburu00743 жыл бұрын
God
@francoiscobena82793 жыл бұрын
In spanish pls
@Psychafn3 жыл бұрын
In the world
@frakamgame34302 жыл бұрын
too much glue on the wings
@axelsmith209 Жыл бұрын
I disagree, the more glue the less likely the plane will shatter into pieces