Introduction to Autodesk Inventor. Part 5. Holes and Hole Notes

  Рет қаралды 205

Scott Dellinger

Scott Dellinger

Күн бұрын

This video was recorded so that my absent high school engineering students could see the lecture they missed. It covers Holes and Hole Notes in Autodesk Inventor. Sorry the production quality is low and the sound is not the best, but that is what happens when you try to lecture and hold a classroom of 9th graders together.

Пікірлер
Introduction to Autodesk Inventor. Part 6. Assemblies
16:04
Introduction to Autodesk Inventor. Part 6. Assemblies
Scott Dellinger
Рет қаралды 120
You ONLY Need 12 Commands in Fusion (Expert Advice)
12:14
You ONLY Need 12 Commands in Fusion (Expert Advice)
Tyler Beck of Tech & Espresso
Рет қаралды 38 М.
😯 Подарила сыну БМВ, но не ожидала такой реакции на машину! | Новостничок
00:20
😯 Подарила сыну БМВ, но не ожидала такой реакции на машину! | Новостничок
НОВОСТНИЧОК
Рет қаралды 6 МЛН
Sigma Kid Mistake #funny #sigma
00:17
Sigma Kid Mistake #funny #sigma
CRAZY GREAPA
Рет қаралды 30 МЛН
When you have a very capricious child 😂😘👍
00:16
When you have a very capricious child 😂😘👍
Like Asiya
Рет қаралды 18 МЛН
Этот бой - Самое большое РАЗОЧАРОВАНИЕ за всю КАРЬЕРУ БУАКАВА!
01:00
Этот бой - Самое большое РАЗОЧАРОВАНИЕ за всю КАРЬЕРУ БУАКАВА!
БЕЗУМНЫЙ СПОРТ
Рет қаралды 2 МЛН
Drawing Walls - Skill Builder
15:00
Drawing Walls - Skill Builder
SketchUp
Рет қаралды 240 М.
Introduction to Autodesk Inventor. Part 1.
18:52
Introduction to Autodesk Inventor. Part 1.
Scott Dellinger
Рет қаралды 297
Filleting Corners in TinkerCAD
16:55
Filleting Corners in TinkerCAD
Ryan Castor
Рет қаралды 24 М.
Level 1 to 100 Science Experiments
15:53
Level 1 to 100 Science Experiments
Hafu Go
Рет қаралды 19 МЛН
Amazing Manufacturing Process Of Making Rear Wheel Hub & Hexagon Slotted Nuts In A Factory
26:57
Amazing Manufacturing Process Of Making Rear Wheel Hub & Hexagon Slotted Nuts In A Factory
Pak Manufacturing Skills
Рет қаралды 3,9 М.
Introduction to Autodesk Inventor. Part 4. Setting up Drawings in Inventor
18:15
Introduction to Autodesk Inventor. Part 4. Setting up Drawings in Inventor
Scott Dellinger
Рет қаралды 344
Applying Constraints to Sketches in Autodesk Inventor
15:59
Applying Constraints to Sketches in Autodesk Inventor
Practical AutoCAD and Inventor
Рет қаралды 192
Fusion 360 | Sketch Wrap? (Not Project to Surface)
6:27
Fusion 360 | Sketch Wrap? (Not Project to Surface)
Fusion 360 School
Рет қаралды 135 М.
😯 Подарила сыну БМВ, но не ожидала такой реакции на машину! | Новостничок
00:20
😯 Подарила сыну БМВ, но не ожидала такой реакции на машину! | Новостничок
НОВОСТНИЧОК
Рет қаралды 6 МЛН