Glad to be back doing electronic projects. Thanks for watching!
@andrewtoogood14294 жыл бұрын
They are designed as parking sensors for cars, and can be used/read in many modes.
@SkottTomas4 жыл бұрын
Great to have you back 😄
@BrainybitsCanada4 жыл бұрын
Thank you Tomas, glad to be back. Thank you for watching!
@ProfePablo4 жыл бұрын
Que bueno verte nuevamente.!
@BrainybitsCanada4 жыл бұрын
Contento de estar de vuelta! Gracias por tu comentario y por supuesto que lo ves!
@JonnyBergdahl4 жыл бұрын
I teared one apart. It is potted with silicon, so it is water proof.
@BrainybitsCanada4 жыл бұрын
Very cool! Thanks for sharing your findings.
@surajsurya19284 жыл бұрын
That was some really helpful comment. Thanks man!!
@juliojesse29113 жыл бұрын
you prolly dont care but if you're stoned like me during the covid times you can watch all of the new series on InstaFlixxer. I've been streaming with my gf during the lockdown =)
@gustavotomas52143 жыл бұрын
@Julio Jesse yup, I've been watching on instaflixxer for since november myself :D
@markrainford12192 жыл бұрын
Nice one. Thank you for your sacrifice. 😁
@eXtremeElectronics Жыл бұрын
What is adjustable thing on the board? do you have any idea?
@stephanedenis53944 жыл бұрын
Welcome back, moi content :)
@BrainybitsCanada4 жыл бұрын
Thanks, content de faire quelque chose de different après tout ces mois...
@fablapp2 ай бұрын
any experience with JSN-SR20-Y1? Txs
@kitkirkyen20022 жыл бұрын
Thank you for this tutorial sir. Can i ask if you already had made a second video of this jsn sensor sir? Like re-writing the code to eliminate those false readings? Thank you.
@donaldjohnson394 Жыл бұрын
Has Ivan quit YT or gone somewhere else? Been so long since he has posted a video. I miss his content.
@tobikellner87084 жыл бұрын
Hi I read in some data sheets that it has a 75° measurement angle, but I cannot find clear info on this. Can you clarify this? I guess you could correct this by either mounting the sensor at an angle, or by correcting the results mathematically. I am planning to use it for measurements of pond water levels (measuring downwards from a fixed beam onto the water surface). Thanks for any comments!
@Hk-nr2tg4 жыл бұрын
Sir, please tell me, what is the use of trimmer(pot) in jsn sr04t module?
@DouglasDelgadodeSouza4 жыл бұрын
People say it is to fine adjust the frequency (40kHz) at factory. I don't know for sure but when I messed with it almost nothing changed, which corroborates this theory. Also apparently, it is an adjustable inductor.
@mrbumcraic50463 жыл бұрын
Is it possible to shorten the trigger pulse to get a smaller minimum distance
@ryan26843 жыл бұрын
can i use the JSN-SR04T without that board? only the sensor to connect it to arduino? and im wondering how many cable are in that sensor, is there a com cable for sure or just VCC and GND?
@crissto8591 Жыл бұрын
it's a two pin sensor so you need a board to translate
@drlerkan Жыл бұрын
thanks. Can we get a logic 1 ( high ) signal from this module? ( to control 5v relay )
@surajsurya19284 жыл бұрын
Hi Brainy-Bits, can you help me to get the arduino library for this sensor,i am doing a project usung this so its urgent.pls help me.
@emilianogaston3 жыл бұрын
Hi! Thanks. Very helpful video. Do you know if this sensor is better to measure soft surface like cloth? I want to measure the distance between this sensor and a human (who wears clothes). I couldn't do it with ultrasonic HC-SR04, seems like this sensor it's the same for my porpuse, doesn't?
@deenabalovi4524 Жыл бұрын
please i want some help for the JSN SR04M 2.0
@bekammengistu98577 ай бұрын
hey pls can you show us how to control (10 or more) stepper motors pls
@Karlo5783 жыл бұрын
Hi, the link of tutorial is wrong
@saadasonic20002 жыл бұрын
Nice
@TeganBurns3 жыл бұрын
I'd like to see a different controller board for this sensor that accepts multiple sensors
@markrainford12192 жыл бұрын
They do a dual one.
@kailashmalviya83 жыл бұрын
Plz makes water level tank pump controller using this sensor jsn sr04t
@fernandohood55423 жыл бұрын
What is the maximum tested distance?
@programm_x8643 жыл бұрын
Hallo can somebody say me weher i can find the data for the laiser cutter for the 16x16 led Matrix
@leonardiux3453 жыл бұрын
Hi, how can I contact you?
@paperwelder3 жыл бұрын
I far can the send a signal. Like in ft
@pintokitkat4 жыл бұрын
So, waterproof, tick; long cable, tick; more expensive, cross; unreliable, cross; can't measure under 20cm, cross; bigger board, cross. On balance, not an illustration of progress.
@BrainybitsCanada4 жыл бұрын
There are some compromises for sure compared to the HC-SR04, but I'm currently working on the next tutorial and will share my finding about the accuracy. Of course if your project needs to read distances lower than 20cm than yes, this sensor is not suited for those. Thank you for your comment and for watching!
@TimS02083 жыл бұрын
@@BrainybitsCanada Thanks for this! Different projects have different requirements and can accept things that may not work out for others. For me, those shortcomings aren't significant compared to the benefits this product offers over the previous versions. Since my project experiment is to monitor the space above a vehicle (from about 4 ft (1.2m) below the roofline) to detect/display overhead obstruction distance/clearance, the 20cm minimum isn't an issue. Neither is the additional board, which will inside the vehicle. The 2.5m cord, small plug, and single/small sensor gives me some excellent and unobtrusive mounting options. I do plan to use 2, one on each forward corner, because damage to equipment on the roof would be real bad. Yes, this is just a back-up when moving under low overhangs at very slow speeds (that you should have confidence already in clearing). Of interest will be how reliable and accurate at distances of 2m-3m (6.5 to 10 ft).
@rafaelgiorgana34424 жыл бұрын
Se podría programar este sensor sin un microcontrolador ? Is it possible to use it / program it without a microcontroller?
@josu67983 жыл бұрын
Necesitas alguna herramienta que te permita interpretar las señales PWM que este manda
@shanofromdwin65492 жыл бұрын
Hi friend, t, DWIN is looking for the influencer in KZbin / Facebook / Ins, may i kindly know are you interested in this?