JTS Airacuda .25cal air rifle review

[@silentobserver9589]

I love my CVlife scopes. They have done everything my Leopold and Bushnells have done for a fraction of the price

[@Valhallafabrications]

I know right? Great value for the money. I have many and not one has let me down

[@ezrabrook3993]

Kool gun A+++ guud shooting👍🏻✌🏻

[@airgunbubba2505]

great shooting!

[@Relaxbadkneeadventures]

Nice airgun 👍😉

[@Relaxbadkneeadventures]

And yep I subscribed 👍😉

[@HD-ph1dc]

Just bought mine. What kind and weight pellets do you find most accurate in yours? I've only tried JTS 25.39s so far, fingernail size groups at 30 yds though.

[@JW-pj1zd]

Some of them look really light and super pretty looking and some of them are super dark. Wich is making me hesitant to buy from certain places

[@donwilson350]

Hey bud did you do any adjusting on the hammer spring in the back to get it the group and to get more power out of the gun

[@Valhallafabrications]

This was shooting with settings right out of the box. Actually this rifle has been great! Never felt the need to try to “tweak” it. I know other guys do but feels super nice just the way it came to me. Thanks for watching! Keep shooting, and stay safe.

[@007tallguy]

Nice little range set-up and great shooting! 👍 I've got a 22cal on the way, should have it in a few days. 😁 And one question: did you say the stock is unfinished..? 🤔

[@Valhallafabrications]

When I received mine it didn’t have much of a finish at all on it, yours may differ. Mine was dry feeling and looked pretty much unfinished but after a little boiled linseed oil it’s beautiful and protected now. Wonderful rifle. I’ll bet you will love yours as much as I love mine!

[@robertsaberniak007]

Those JTS guns seem like they're pretty decent

[@Valhallafabrications]

Very nice rifle, love mine, only thing I changed was the finish on the stock. But that can be chalked up to personal preference. Definitely worth the investment.

[@aaronmcfee506]

Love mine too

[@KarelRode]

Are any clips available with a moderator? Many have found that it fails spectacularly, and so have I.. Please do look out for that before you move to buy.

[@Valhallafabrications]

I’m very lucky to live in an extremely rural area of forest land near the Adirondacks, the tiny bit of commotion I make out here doesn’t disturb anyone. My opinion is moderation certainly would change velocity and therefore accuracy. So I would say I agree with you sir.

[@ScottH22175]

I heard it you size up on the caliber on your moderator, it won't affect pellet flight.

[@KarelRode]

@@ScottH22175 I am 2 calibres up, with a free moderator from JTS, and it does not clip, but is makes no sound difference.

[@ScottH22175]

@@KarelRode DonnyFL moderators are worth a call.

[@azrag777]

Thank you for video ? = Question I also own this JTS .25 AIRACUDA ...it could be me ? I have seen other videos with this gun prior to it making it to the public ,with the end cap coming off to allow for moderator .I have tried with my hands I have also tried with tool to try remove end cap ,I have not shot this ,but I have put scratches marks all over the end cap ...is it me ? Or is their a trick 🎉 lol ...I own over 20 different PCP ...opening the box and holding the gun it's bad ass...let me know what i can do with This ...like a safe to unlock the end cap ? Lol thanks for videos

[@Valhallafabrications]

I’m really surprised to hear you are having trouble unscrewing the thread protector, I’m clueless as to why, mine unscrews easily by hand and has since I got it. Sounds goofy but are you sure you are turning the right way? (Counterclockwise) thanks for watching my video and I hope you figure out your issue.

[@azrag777]

@@Valhallafabrications i give up on this one ...it's not you ? I believe you! as other PCP guns that allow moderator suppressor I have one for every gun I own PCP! This JTS AIRACUDA .25 Great gun from my observation only and having not shooting it to test it just the quality feel etc...only issue I have had so far due to I have not shot this AIRACUDA "Standard" .25 is this end cap not coming off ...4 different times with all same results ! Not budging ? Or coming off ? Each time with a new scratch to be filled with disappointment like great gun but what am.i doing here ? Only gun ever to even be upset with such a small deatail ? . I just tried this with a miniature torch to heat up end cap ? .. most likely I will just send it back I'm (p.o.) that I now have scratches at the end cap ...yes it's can be covered up ,just the fact that I know they are their none of guns have a a scratch its been due to this .not the other videos or your videos its my luck i guess..I'll be trying to reach out to JTS ask did some standards come with removable others no ? Because go get any tool try to unscrew a end cap that doesn't come off you'll have scratches,some small area little more noticable I used black permanent marker touch it up ...thanks for info ...again I have lots of pcp rifles the best of them ...I really enjoyed this gun from opening it up if you know a good gun you know or can tell this one is that one...I guess i got a fluke ? unable remove it ? Purchased another 1/2 thread with moderator/?

[@azrag777]

So for record I spoke to Johanna from JTS airguns regarding these videos that show JTS AIRACUDA STANDARD with the removal of the end cap to add a moderator at the end ...I have attempted 4 different times all with same result into scratching my end cap and just a tiny scratch bothers me more less several all do to videos stating it comes off ...No it does not possibly yours a fluke or possibly bs from both ends not you in general it's upsetting to see a gun so nice to then have the people in making this having no clue that videos are going around with removal of end cap to add a suppressor im not sure wth is going on but ...I will come out with video to correct this or going to have alot of pissed of owners of JTS box shows end cap videos show end cap ..not your fault im upset i have a new gun with scratched up lol whats next .22 now going shoot .177 some jts do others dont or some jts have this yours might not give me a break i love the gun ..not a good start jts

[@bassmankelly1744]

Empty the tank and try a hairdryer to heat the end cap. Mine was stuck too but i had to use a pipe wrench to get it off. I think it was accidentally thread locked at the factory and the video they show to remove the barrel they show using a heat gun or hairdryer. Just don't over heat or heat with the tank under pressure. Idk if it will work its just an idea.

[@azrag777]

😅​​​​​​@@bassmankelly1744 i believe you ..after 4 attempts to try remove? Even attempting & used a torch at end did not have any luck ...except putting good noticable scratches on it...GOOD LUCK WITH CUSTOMER SERVICE JTS I SPOKE TO LADY JTS HERE TEXAS TOOK MY NAME explained would have someone TO CALL AND EMAIL ?THAT NEVER HAPPENED! (Hatsan customer service here we go lady apparently nor the people in warehouse had no clue as she put me on hold to go ask the warehouse employees about this ) I explained do any of your employees watch video or know of the end cap showing to be removed some do some don't apparently? Very nice lady in JTS except had no clue explained we will have the main guy to call regarding this ? Christmas almost no call probably next Christmas I'll let you know I'm sure Joahana call back by then we'll see i won't hold my breathe ...LOOKING AT MOST GUNS SIMILAR TO THE JTS LIKE CLONES WITH A DIFFERNT NAME AS ...SNOWPEACK OR ARTEMIS CHINESE SELLING SAME GUN Different Name...I go look most these guns say hey? that's the BLAH BLAH black sheep and half quarter sheep but same sheep different clothes examples many more like artemis or copy of that Diana bandit and many more ? Copies copies so stop with all the videos of new gun ? It's the same darn PCP different name ..I get it paying them for this videos or something up? ...same here JTS nothing new just darn name we are suckers ...it's a good gun sold in texas how different or trying to be ?? Like either shit or get off the toilet it either comes on or off that simple no Chinese Bs here ok...sorry I had to throw that in...yes people everything made. China get over it ...we been sold out that's a different story THANK YOU SIR FOR ADVICE HAPPY HOLIDAYS